4 Ton 14 SEER Goodman Heat Pump Air Conditioner System

The Goodman® SSZ14 14 SEER Heat Pump uses the environmentally friendly refrigerant R-410A and features operating sound levels that are among the best in the heating and cooling industry. R-410A is chlorine-free to help prevent damage to the ozone layer. With its 14 SEER rating, the SSZ14 will help reduce energy consumption throughout the life of the system.

All Goodman 14 / 15 SEER heat pumps must be installed with a bi-flow thermostatic expansion valve. This valve is installed in front of the indoor evaporator coil inline with the line set piping. If you are installing a heat pump with a backup heat source which will be a fuel furnace, you will need to install an electronic all fuel kit.

This heat pump can be 14 or 15 SEER, depending on which indoor unit it is paired with. If it is installed with the manufacturer recommended evaporator coil, a Goodman variable speed furnace, variable speed air handler, or variable speed modular blower, and also sometimes a thermostatic expansion valve (TXV), it is a 15 SEER system. A 15 SEER heat pump system will reduce your electric bill approximately 7% - 8% more than a 14 SEER heat pump system.

Please note that this heat pump equipment comes pre-charged with R-410A liquid refrigerant and by Federal law cannot be released to the atmosphere. Yes, you can purchase this equipment without being EPA certified. And, if you are mechanically inclined you may perform about 90% of the equipment installation yourself. However, we strongly recommend to have a professional heating/cooling contractor do the final part of the installation including managing the refrigerant. An HVAC contractor has the tools and know-how to do this work.

Heat Pump's Standard Features

• R-410A environmentally friendly refrigerant
• High-efficiency Copeland® scroll compressor
• High- and low-pressure switches
• High-quality compressor sound blanket
• 850 RPM condenser fan motor
• Liquid refrigerant return protection
• Factory-installed, bi-flow liquid line filter dryer
• Service valves with sweat connections and gauge ports
• Copper tube/enhanced aluminum fin coil
• Reliable time-initiated, temperature-terminated defrost control
• Contactor with lug connection
• Ground lug connection
• ARI Certified
• ETL Certified

Cabinet Features

• Unique Goodman® sound control top design
• Steel louver coil guard
• Heavy-gauge galvanized-steel cabinet
• Attractive Architectural Gray powder-paint finish with 500-hour salt-spray approval
• Top and side compressor and tubing access
• Service ports and controls are accessible while unit is operating

The Goodman ASPT Multi-Position Air Handler with EEM (Energy-Saving) Motor is suitable for use with R-410A refrigerant and may be installed in a variety of locations. This air handler features a SmartFrame™ sub-structure that adds lateral stability, mounting locations for internal components, and additional insulation retention.

Standard Features

• All-aluminum evaporator coil
• Direct-drive, multi-speed ECM motor
• Internal factory-mounted TXV valve
• Transformer and blower time-delay on all units
• Easy single-bulb UV light compatibility
• Cabinet air leakage less than 2.0% at 1.0 inch H2O when tested in accordance with ASHRAE standard 193
• Cabinet air leakage less than 1.4% at 0.5 inch H2O when tested in accordance with ASHRAE standard 193
• AHRI Certified; ETL Listed

Cabinet Features

• New rigid SmartFrame™ cabinet
• 21 inch depth for easy attic access
• DecaBDE-free thermoplastic drain pan
• Galvanized leather grain-embossed finish
• Foil-faced insulation covers the internal blower case to reduce operating sound and cabinet condensation
• Glue-less cabinet insulation retention
• Screw-less sides & back prevents condensation
• Multi-position capability: upflow, downflow, horizontal or vertical
• Coil-mounting track for quick repositioning
• Tool-less filter access accommodates standard-size filters
• Multiple electrical knockouts
• Heavy-gauge bottom plate