The Mitsubishi Ductless Heat Pump Mini Split system provides highly efficient solutions for heating and cooling while providing personalized comfort for the individual zones in which they are installed. Mitsubishi Ductless Heat Pump systems deliver air quietly and continuously with only a gentle whoosh for constant circulation and filtration. Mitsubishi Electric split-zoning systems have long been the choice for thousands of homes, churches, schools, and libraries across the U.S. and the world.
This Mitsubishi Ductless Heat Pump Mini Split system is perfect for rooms that are either too hot in the summer or too cold in the winter. This system can be installed in rooms that are difficult to keep comfortable in all seasons. This system is also perfect for home renovations, new constructions, or house addons that your current system cannot handle.
This system isn't only designed to keep you comfortable but it has also been designed with energy efficiency in mind. The indoor wall mounted air handlers measure the return air and will adjust automatically rather than relying on a thermostat in another room. With INVERTER technology, the system will continuously ramp up and down based on the desired temperature in the room making sure that the room is kept and a steady temperature rather than large temperature swings.
12,000 BTU Wall Mounted Mitsubishi Mini Split Multi Zone GS - Air Handler -R410AThe Mitsubishi MSZ-GS12NA air handler is designed to be able to function as a single zone system or with a multi zone system setup. This unit is manufactured as part of Mitsubishi’s standard air handler series, making it an inexpensive choice for efficient home comfort. With its ability to work with both cooling-only and heat pump condensers, the MSZ-GS12NA can function in almost any basic configuration and application. The unit also has the ability to ramp up and down based on the thermostat’s needs along with an automated vertical air swing adjustment system to direct the airflow where it needs to go, keeping you comfortable year-round with the right condenser.
Please note that in order to function, this air handler must be installed with a condenser and other installation equipment, available at an additional cost.
- Able to cover up to a small room in ideal conditions
- 12,000 BTU wall-mounted air handler with remote
- Automatic adjustments to match the thermostat’s needs
- .375 gallon per hour dehumidification rate
12,000 BTU Mitsubishi GS-Series H2i Single Zone Mini Split Heat Pump Condenser - MUZ-GS12NAHZOverview
The Mitsubishi MUZ-GS12NAHZ is a 12,000 BTU single-zone mini split heat pump condenser engineered to deliver dependable comfort in any season. Featuring Hyper-Heating INVERTER® (H2i®) technology, this unit maintains powerful heating performance even in sub-zero temperatures, making it ideal for year-round climate control in individual rooms or zones.
Key Features
- 12,000 BTU Capacity: Ideal for bedrooms, home offices, or mid-sized zones
- Hyper-Heating INVERTER® (H2i®): Provides reliable heating even in temperatures as low as -13°F
- Energy Efficient: Inverter-driven compressor ensures consistent performance and reduced energy use
- Quiet Operation: Low operational noise makes it suitable for quiet indoor environments
- Durable & Reliable: Built with Mitsubishi’s renowned quality and performance standards
Cold Climate Ready
Whether you're heating during a freezing winter or cooling through summer, the MUZ-GS12NAHZ delivers outstanding year-round comfort. It pairs with compatible indoor units for flexible installation and superior temperature control.
Refrigerant Line Set with 1/4" and 3/8" Line Ends - 15 feetRefrigerant line set (pair) for mini split systems, liquid line size 1/4 inch O.D. flared ends, suction line size 3/8 inch O.D. flared ends,
length 15 feet, insulation thickness of 1/2 inch. For use with air conditioning and refrigeration systems, includes both the liquid line
and the suction line.
Features:
- One pair, heavy duty refrigerant lines
- Flared line ends
Refrigerant Line Set with 1/4" and 3/8" Line Ends - 35 feetThis insulated refrigerant line set for mini split systems comes as a pair, including both the liquid line and suction line. It is used to connect the indoor air handler to the outdoor condenser. The line set is 35’ feet long. The liquid line has 1/4 inch outside diameter flared ends. The suction line has 3/8 inch outside diameter flared ends.
Features:
- Insulated
- Flared Line Ends
- Heavy Duty Refrigerant Lines
Refrigerant Line Set with 1/4" and 3/8" Line Ends - 50 feetRefrigerant line set (pair) for mini split systems, liquid line size 1/4 inch O.D. flared ends, suction line size 3/8 inch O.D. flared ends,
length 50 feet, insulation thickness of 1/2 inch. For use with air conditioning and refrigeration systems, includes both the liquid line
and the suction line.
Features:
- One pair, heavy duty refrigerant lines
- Flared line ends
Refrigerant Line Set with 1/4" and 3/8" Line Ends - 25 feetRefrigerant line set (pair) for mini split systems, liquid line size 1/4 inch O.D. flared ends, suction line size 3/8 inch O.D. flared ends, length 25 feet, insulation thickness of 1/2 inch. For use with air conditioning and refrigeration systems, includes both the liquid line and the suction line.
Features:
- One pair, heavy duty refrigerant lines
- Flared line ends
Refrigerant Line Set with 1/4" and 3/8" Line Ends - 30 feetRefrigerant line set (pair) for mini split systems, liquid line size 1/4 inch O.D. flared ends, suction line size 3/8 inch O.D. flared ends,
length 30 feet, insulation thickness of 1/2 inch. For use with air conditioning and refrigeration systems, includes both the liquid line
and the suction line.
Features:
- One pair, heavy duty refrigerant lines
- Flared line ends
