Rheem RTGH 9.5 GPM 199,900 BTU Liquid Propane Indoor Condensing Tankless Water Heater (.93 UEF)

High-Efficiency Super Condensing Indoor Liquid Propane Tankless Water Heater Delivering 9.5 GPM

The Rheem RTGH Series RTGH-95DVLP-3 is a super high-efficiency, condensing indoor liquid propane tankless water heater engineered to supply continuous on-demand hot water with a maximum gas input of 199,900 BTU/h, a maximum flow rate of 9.5 GPM at a 35°F temperature rise, and a 0.93 Uniform Energy Factor (UEF).

Engineered for high-demand residential applications, this unit features a super condensing design incorporating a primary copper heat exchanger and a secondary stainless steel heat exchanger to capture extra latent heat. It supports Schedule 40 PVC, CPVC, or polypropylene vent runs up to 60 feet with 2-inch venting or 150 feet with 3-inch venting, and offers a compact cabinet profile that is up to 20% smaller and lighter than previous models to simplify one-person installations.

Key Benefits

• High Heating Capacity: Delivers up to 199,900 BTU/h maximum gas input to support heavy residential hot water demands.
• On-Demand Hot Water: Provides up to 9.5 GPM at a 35°F temperature rise. Actual flow rate varies with incoming water temperature and selected output temperature.
• Super High-Efficiency Performance: An impressive 0.93 Uniform Energy Factor (UEF) maximizes energy savings and operating efficiency.
• Dual Heat Exchanger Design: Combines a durable primary copper heat exchanger with a secondary stainless steel heat exchanger to extract maximum heat and boost durability.
• Hot-Start Programming™: Rheem-exclusive programming keeps the unit in a ready state between back-to-back hot water uses to minimize cold water bursts.
• Flexible PVC Venting Options: Compatible with Schedule 40 PVC, CPVC, and polypropylene venting materials, allowing vent runs up to 60 feet with 2-inch pipe or 150 feet with 3-inch pipe.
• Compact & Lightweight Profile: Enhanced design is up to 20% smaller and lighter to simplify single-person handling and wall mounting.
• Retrofit-Friendly Clearances: Industry-best 1/2-inch side-to-side clearance allows for safe placement in tight indoor utility spaces.
• 1/2-Inch Gas-Line Compatibility: Accommodates 1/2-inch gas lines where permitted by local code, simplifying replacement projects.
• Ultra Low NOx Emissions: Meets strict 14 ng/J NOx requirements and is SCAQMD Rule 1146.2 compliant.

Understanding Tankless Water Heater Sizing

The RTGH-95DVLP-3 provides a maximum flow rate of 9.5 GPM at a 35°F temperature rise. At a 45°F temperature rise, the maximum flow rate is 8.5 GPM, while a 67°F temperature rise provides a maximum flow rate of 5.7 GPM.

Flow capacity varies based on incoming groundwater temperature and the desired hot water temperature. The unit's estimated flow-rate capacity ranges from 3.8 to 9.5 GPM based on standard temperature rises from 35°F to 100°F.

How to Calculate Temperature Rise

To determine temperature rise, subtract the incoming water temperature from your desired hot water temperature. For example, if the incoming water temperature is 55°F and the desired water temperature is 120°F:

120°F - 55°F = 65°F Temperature Rise

Refer to the Water Flow (GPM) chart below to compare estimated flow rates at different temperature rises and determine whether the Rheem RTGH-95DVLP-3 model can meet your household's hot water demand. Actual flow rates vary depending on incoming water temperature and the selected water heater temperature.

Energy Efficiency & Performance

• Uniform Energy Factor (UEF): 0.93
• Maximum Flow Rate: 9.5 GPM at a 35°F temperature rise
• Gas Input: 11,000 up to 199,900 BTU/h
• Activation Flow Rate: 0.4 GPM (0.26 GPM minimum continuous flow)

Actual hot water flow depends on the incoming water temperature and the required temperature rise.

Warranty

Rheem provides a 15-year heat exchanger warranty, 5-year parts warranty, and 1-year labor warranty for single-family residential installations.

Important Warranty Conditions:

• Residential Use: Standard residential installations qualify for full coverage. Commercial installations receive 5-year heat exchanger and parts coverage.
• Recirculation Systems: Controlled recirculation qualifies for full residential coverage. Uncontrolled, continuously operating recirculation reduces heat exchanger and parts coverage to 3 years.
• Operating Hours: All warranty coverage ends after 12,000 hours of operation.
• Installation & Maintenance: Damage from improper installation, mineral buildup, scale, or water quality outside Rheem's specified limits is excluded.
• Labor Coverage: Covers reasonable labor costs for covered repairs during the first year when performed by a licensed, qualified contractor trained on Rheem tankless water heaters.
• Ownership: Warranty applies only to the original owner at the original installation location and is nontransferable.

Warranty coverage begins on the documented installation date. Without documentation, coverage begins 90 days after manufacture. Product registration does not extend the warranty period.

Review Rheem's official Limited Warranty Certificate for complete terms, exclusions, and coverage details.

What's Included

• Rheem RTGH-95DVLP-3 Condensing Indoor Tankless Water Heater
• Mounting and Spare Parts Kit
• Vent Screens
• 6-Foot, 120V, 3-Prong Power Cord
• Use and Care Manual

Requirements & Considerations

• Fuel Type: Configured for Liquid Propane (LP) gas. (Natural gas RTGH-95DVLN-3 model available separately).
• Installation Type: Indoor installation. (Outdoor conversion kit RTGH-X is sold separately if exterior mounting is desired).
• Venting: Uses 2-inch or 3-inch Schedule 40 PVC, CPVC, or polypropylene pipe. Supports up to 60 feet of 2-inch pipe or 150 feet of 3-inch pipe.
• Gas, Water & Condensate Connections: 3/4-inch NPT gas, hot water, and cold water connections, plus a 1/2-inch NPT condensate drain connection.
• Electrical Requirements: 120V, 60Hz power supply (85W normal operation, 132W anti-freeze protection draw).
• Clearances: Maintain 12 inches top/bottom, 1/2 inch sides, 1/2 inch front, and 0 inches back clearance for safe operation and service access.