1-800-397-1392
Today's Hours 8am - 9pm est
Today's Hours 8am - 11pm est
Today's Hours 8am - 9pm est
Out of stock
AHRI Number:212334683
An ACiQ combination system is a great choice to keep your home comfortable all season long. With tons of features and a great price, an ACiQ dual fuel system is a perfect choice for all of your heating and cooling needs.
The ACiQ N80ESN0702116A is an inexpensive model of furnace to provide reasonable comfort to your home. At a basic efficiency, this furnace will heat your home adequately with the right output, providing comfort to your home even in the coldest parts of the year.
The ACiQ N80ESN0702116A has an input of 66,000 BTU. With an efficiency of 80%, this means that the furnace has an output of 52,800 BTU. The 80% AFUE also means that for the gas going into the furnace, 80% of it is used to heat your home while the remaining 20% is lost out the flue piping and lost to normal furnace operations. All 80% furnaces require metal flue venting, and if you need it to be plastic/PVC venting a furnace with an efficiency of 90% or above is required. While this unit uses natural gas as fuel out of the box, we also have an LP conversion kit, available at an additional cost. Please note that this furnace is not Low NOx or Ultra Low NOx compliant and if shipped to California may be subject to a mitigation fee.
ACiQ offers 10 year parts and 20 year heat exchanger limited warranties. Please note that in order for the heat exchanger and parts warranties to be upheld, the unit must be registered through the manufacturer within 90 days of installation. The installation must also follow your state and local codes.
With its ability to be installed in any configuration (upflow, downflow, or horizontal) the ACiQ N80ESN0702116A is very versatile in application potential. The unit has a durable outer casing that can withstand wear-and-tear through its entire lifetime, providing the peace of mind that your home will stay comfortable year-round. Please note that this furnace is not intended for mobile home installation on its own.
Every ACiQ furnace is designed to keep your family warm and comfortable year after year. Whisper-quiet ECM blower fans, solid construction with thicker sheet metal and
more cabinet insulation give you near-silent operation. From entry level to top-of-the-line, your comfort is the priority.
ACiQ saves you money up front, but also over time by reducing energy bills. Multi-speed or Variable Speed ECM blowers come in every furnace. Adding options such as high-efficiency secondary heat exchangers, two stage heating, modulating burners and variable blowers all can further reduce your energy bills while increasing comfort.
Thicker sheet metal, more cabinet insulation and aluminized steel heat exchangers reflect the highest build quality you can get. Every furnace is backed by ACiQ’s 10 year, 20 year or lifetime (depending on model) heat exchanger extended warranty with online registration.
ACiQ takes pride in its ability to provide a high-quality system, including all system components. Leaving no exception, the EAM4X42L21A horizontal coil is a superior option for almost any application while maintaining the entire unit's efficiency with a factory-integrated TXV kit for enhanced energy optimization. With its unique performance features along with its ability to be applied in any orientation, this coil is a superior option for your home's comfort.
The ACiQ EAM4X42L21A is rated for up to 3.5 tons of heating and cooling. With its ability to be installed with either an AC-only condenser or a heat pump condenser, this unit is ideal for many applications. In some packages, this coil will be larger than its paired condenser, which will increase the overall efficiency of the entire unit, but the coil should never be smaller than its paired condenser. Please note that this item cannot operate independently from a compatible condenser and blower or furnace, each available at an additional cost.
ACiQ offers a 10 year parts warranty on their coils when they are installed following your state and local codes, as well as the system is paired with a certified system matchup. Please note that in order to obtain the entire length of this warranty, the entire unit must be registered through the manufacturer.
| 66,000 BTU 80% AFUE Single Stage Multi-Positional ACiQ Gas Furnace | |
|---|---|
| SKU | N80ESN0702116A |
| Weight | 142.000000 |
| AHRI Certificate Number | 213146137 |
| Exhaust Flue Requirement | Metal |
| Manufacturer | ACiQ |
| Equivalent | Carrier Equivalent: 58SB0A070E21--16 Tempstar Equivalent: TN80ESN0702116A Bryant Equivalent: 810SA48070E21 |
| Furnace Efficiency / AFUE | 80% |
| Heating BTU | 66,000 |
| Blower Motor | Multi-Speed ECM |
| Drive Type | Direct |
| Maximum CFM | 1545 |
| Motor RPM | 1050 |
| Horsepower | .75 HP |
| Configuration | Upflow/Downflow/Horizontal |
| Electrical | 115v 1 Phase 60 Hz |
| Electric Phase Filter | Single Phase |
| Max Breaker Size | 15 Amps |
| Connection | 1/2" NPT |
| Maximum Inlet Pressure | 13.6"wc |
| Burner Stages | Single |
| Ignition Type | Direct Ignition with Silicon Nitride Hot Surface Ignitor |
| Fuel Type | Propane, Natural Gas |
| Certification | AHRI Certified |
| Height | 33 1/3" |
| Width | 21" |
| Depth | 29" |
| Warranty | 20 Year Heat Exchanger and 10 Year Parts with Online Registration |
| Resources | You will need Adobe® Acrobat® Reader to view PDF documents. |
| Safety Information |
This gas appliance requires a trained technician to install. Improperly connecting gas lines or improperly connecting a gas flue or venting may result in death. By purchasing this item, you are agreeing that you are using a trained technician to install this gas appliance. We will not be responsible for any injury or property damage arising from improper service or service procedures. Whoever installs or services this unit assumes responsibility for any personal injury or property damage which may result. Many jurisdictions require a license to install this equipment.
PROPOSITION 65 WARNING |
| 2.5 Ton 14.3 SEER2 ACiQ Heat Pump | |
| SKU | R4H5S30AKAAA |
| Weight | 171.000000 |
| Manufacturer | ACiQ |
| Replaces | R4H430GKC |
| Cooling BTU | 30,000 |
| Heating BTU | 30,000 |
| Decibel Level (dBA) | 76 |
| Horsepower | 0.1 HP |
| Refrigerant | R410A |
| SEER2 | 14.3 |
| Condenser Stages | Single Stage |
| Compressor Type | Scroll |
| Liquid Valve Size | 3/8" |
| Suction Valve Size | 3/4" |
| Electrical | 208/230v 1 Phase 60 Hz |
| Max Breaker Size | 30 Amps |
| Min. Breaker Size | 18.2 Amps |
| Tonnage | 2.5 Ton |
| Height | 28 1/4" |
| Width | 31 3/16" |
| Depth | 31 3/16" |
| Warranty | 10 Years Parts with Online Registration |
| Resources | You will need Adobe® Acrobat® Reader to view PDF documents. |
| Safety Information | PROPOSITION 65 WARNING |
| ACiQ 3.5 Ton 21" Width Multi-Positional Evaporator Cased Coil | |
| SKU | EAM4X42L21A |
| Weight | 78.000000 |
| Manufacturer | ACiQ |
| Equivalent | Carrier Equivalent: CAPMP4221ALA Tempstar Equivalent: EAM4X42L21A Bryant Equivalent: CAPMP4221ALA |
| Configuration | Multi-Positional |
| Refrigerant | R410A |
| Liquid Line | 3/8" |
| Suction Line | 7/8" |
| Tonnage | 3.5 Ton |
| Style | A-Coil |
| Certification | UL Listed |
| Height | 29 3/4" |
| Width | 21" |
| Depth | 20 5/8" |
| Warranty | 10 Years Parts Warranty with Online Registration |
| Resources | You will need Adobe® Acrobat® Reader to view PDF documents. |
| Safety Information | PROPOSITION 65 WARNING |
