COMPETITIVE PRICING
We sell products at wholesale pricing. No markups, no hidden fees. Our average customer saves BETWEEN THREE TO SIX THOUSAND DOLLARS
-That's the Direct Advantage!
Out of stock
AHRI Number:201197945
This Goodman system provides 2.5 Ton of cooling, 80,000 BTU of heating, and acheives 14.5 SEER. These features make it a perfect choice for your next system.
The Goodman GME80805CN furnace features a two stage gas valve and multi-speed blower motor that can be installed in either upflow or horizontal configurations. This furnace also features a X13 blower motor that saves electricity during the heating and cooling months. This direct current motor uses less electricity than the standard multi-speed furnace blower. This furnace also includes a patented aluminized-steel tubular heat exchanger and durable Silicon Nitride Hot Surface Ignition system. These furnaces are run-tested for heating or combination heating and cooling applications. With a heavy-gauge, reinforced, insulated steel cabinet and durable baked enamel finish, this unit can be installed in a variety of locations. Not intended for use in mobile homes.
The Goodman GME80805CN furnace has a 80% AFUE rating which means that for every every $1.00 you spend, 80 cents goes towards heating your home.
Furnace Features
Goodman AC - The GSX140301 Goodman Air Conditioner Condenser uses the chlorine-free refrigerant R-410A to help prevent damage to the Ozone Layer. This unit is equipped with sound-dampening features to provide operating sound levels are among the lowest in the heating and cooling industry. Using high-quality components,the Goodman GSX140301 air conditioner condenser an be either 14 or 15 SEER depending on which indoor unit it is paired with. If it is installed with the manufacturer-recommended evaporator coil, variable speed furnace, variable speed air handler, or variable speed modular blower, and also sometimes a thermostatic expansion valve (TXV), it is a 15 SEER system.
Please note that the Goodman 2.5 Ton Air Conditioner Condenser is regulated by DOE Efficiency Standards.
This pre-assembled transition is a perfect for when the width of the furnace and width of the coil is different. This transition is designed for a 21" to 24.5" transition. This transition is quick and easy to install and eliminates block-offs for maximum efficiency.
Features:With the CAPF3642D6 evaporator coil, Goodman provides an enhanced comfort to your home. With its ability to work with AC-only systems or with heat pumps and its ability to be installed in both the upflow or downflow orientations, the CAPF3642D6 is designed to be versatile in design and to provide an efficient comfort at a low cost.
The Goodman CAPF3642D6 evaporator coil is rated for a 3 to 3.5 ton output. In many system configurations, this coil may be larger in tonnage than its paired condenser. This is intentional, to maintain the overall efficiency of the entire system.Please note that in order for this coil to function, a furnace or blower and a condenser is required, all sold separately.
The CAPF3642D6 coil is covered under Goodman’s standard 10 year parts warranty when the unit is installed following your state and local codes, the coil is paired with a compatible condenser, and the entire system is registered online through the manufacturer.
The Goodman CAPF3642D6 evaporator coil is able to be installed in upflow and downflow applications. With its rust-resistant, thermoplastic drain plan, water retention rate is significantly lower than previous models. For even more enhanced durability, the cabinet is made of a strong galvanized-steel with a leather-grain finish. If you ever need to perform maintenance on your coil, there is a split-seam on the front of the casing for easy internal access. Please note that this coil will not work as a replacement for any single-piece air handler coils.
The CAPF3642D6 evaporator coil’s foil-faced insulation lowers air leakage, increasing the amount of air flow going into your ductwork, keeping you more comfortable while decreasing the unit’s run time. With compatible equipment, the CAPF3642D6 evaporator coil lives up to Goodman’s enhanced comfort and efficiency standards at a reasonable price.
Goodman's TXV valves are designed to improve the reliability and efficiency of your central split system. With the TX3N4, you can be assured that your two-and-a-half or three ton system is getting the proper refrigerant flow, even through changing conditions. Since this valve is installed externally, it is easy to service and maintain. If you're looking to improve the efficiency and performance of your system, the TX3N4 is a good start.
Please note that this is not an exhaustive list. Use Ctrl+F to simplify your search. This part is compatible with the following models:
GSX130301 GSX130361 DSXC160361 GSZ130301 GSZ130361 SSZ140301 SSZ140361 SSZ140381 SSZ160301 SSZ160361 DSZC160361 DSZC180361 CAPF3030*6 CAUF3030*6 CAPF3642*6 CAUF3642*6 CHPF3636B6 CSCF3036N6 CSCF3642N6
2.5 Ton 14.5 SEER 80% AFUE 80,000 BTU Goodman Gas Furnace and Air Conditioner System - Upflow | |
---|---|
SKU | GSX140301 / CAPF3642D6 / GME80805CN / TX3N4 / SST-CD-R6 |
Weight (in lbs) | 199.000000 |
AHRI Certificate Number | 201197945 |
Exhaust Flue Requirement | Metal |
Brand/Manufacturer | Goodman |
Furnace Efficiency / AFUE | 80% |
Cooling BTU | 28,800 |
Heating BTU | 80,000 |
Maximum CFM | 1060 |
SEER1 (Efficiency) | 14 |
EER | 11.5 |
Condenser Stages | Single Stage |
Liquid Valve Size | 3/8" |
Suction Valve Size | 3/4" |
Tonnage | 2.5 Ton |
System Tonnage | 2.5 Ton |
Warranty | 10 Years with Online Registration |