1-800-397-1392
Today's Hours 8am - 9pm est
Today's Hours 8am - 11pm est
Today's Hours 8am - 9pm est
In stock
AHRI Number:209264430
With tons of extra features and a great price, an ACiQ furnace and air conditioning system is the perfect choice for all of your heating and cooling needs for any time of year. All ACiQ models come with a 10 year parts warranty.
The ACiQ N80MSN0701412A is an inexpensive model of furnace to provide reasonable comfort to your home. At a basic efficiency, this furnace will heat your home adequately with the right output, providing comfort to your home even in the coldest parts of the year.
The ACiQ N80MSN0701412A has an input of 66,000 BTU. With an efficiency of 80%, this means that the furnace has an output of 52,800 BTU. The 80% AFUE also means that for the gas going into the furnace, 80% of it is used to heat your home while the remaining 20% is lost out the flue piping and lost to normal furnace operations. All 80% furnaces require metal flue venting, and if you need it to be plastic/PVC venting a furnace with an efficiency of 90% or above is required. While this unit uses natural gas as fuel out of the box, we also have an LP conversion kit, available at an additional cost. Please note that this furnace is not Low NOx or Ultra Low NOx compliant and if shipped to California may be subject to a mitigation fee.
ACiQ offers 10 year parts and 20 year heat exchanger limited warranties. Please note that in order for the heat exchanger and parts warranties to be upheld, the unit must be registered through the manufacturer within 90 days of installation. The installation must also follow your state and local codes.
With its ability to be installed in any configuration (upflow, downflow, or horizontal) the ACiQ N80MSN0701412A is very versatile in application potential. The unit has a durable outer casing that can withstand wear-and-tear through its entire lifetime, providing the peace of mind that your home will stay comfortable year-round. Please note that this furnace is not intended for mobile home installation on its own.
Every ACiQ furnace is designed to keep your family warm and comfortable year after year. Whisper-quiet ECM blower fans, solid construction with thicker sheet metal and
more cabinet insulation give you near-silent operation. From entry level to top-of-the-line, your comfort is the priority.
ACiQ saves you money up front, but also over time by reducing energy bills. Multi-speed or Variable Speed ECM blowers come in every furnace. Adding options such as high-efficiency secondary heat exchangers, two stage heating, modulating burners and variable blowers all can further reduce your energy bills while increasing comfort.
Thicker sheet metal, more cabinet insulation and aluminized steel heat exchangers reflect the highest build quality you can get. Every furnace is backed by ACiQ’s 10 year, 20 year or lifetime (depending on model) heat exchanger extended warranty with online registration.
With the ACiQ R4A5S30AKAWA air conditioner, you will experience reliable comfort that is budget friendly. This air conditioner is rated at 14.3 SEER2 and features a single-stage scroll compressor for quiet operation.
Standard Features
ACiQ has the power to keep things cool when temperatures rise. Every ACiQ condenser uses a scroll compressor for long life and efficiency operation. From entry level to high efficient, single stage, two stage and communicating models, every ACiQ Condenser keeps you cool year after year.
ACIQ saves you money up front, but also over time by reducing energy bills. Models ranging from standard efficiency to high efficient models can provide you savings from 21% to 63% over older, 10 SEER condensers. Coil construction is either all aluminum or copper/aluminum (depending on model) for max efficiency.
ACiQ condensers are 100% run-tested at the factory. Protective coatings on the fins mean long life even in harsh conditions. A filter drier is included to keep the system healthy. ACiQ’s extended warranty with online registration provides 10 year protection.
 NestorInstaller in Chicago, Illinois | What Contractors are SayingThese ACiQ units are easy to work on. The warranty is rock solid and is as good as any warranty in the industry. I'm sold! |
 MichaelInstaller in Atlanta, Georgia | What Contractors are SayingThese ACiQ units are attractive and durable. I never hesitate to recommend ACiQ units to my customers when it is time for them to replace their air conditioners or furnaces. They love getting a high quality unit for such a great price. |
 LukeInstaller in Dayton, Ohio | What Contractors are SayingWas initially concerned about the ACiQ brand as I had heard little about it. My attitude changed completely once I had a look “under the hood”. These ACiQ units are as good as any other brand that I’ve seen. Plus, they have all the features and quality details that the more expensive brands have, but at a much more attractive price. |
 ChrisInstaller in Atlanta, Georgia | What Contractors are SayingI’m a long time HVAC technician. I have an ACiQ furnace in my basement and an ACiQ air conditioner in my yard. I couldn’t be happier with them. ACiQ is always the first brand I offer my customers when it’s time for unit replacement. If it works for me, it will work for them, too. And it does! |
ACiQ takes pride in its ability to provide a high-quality system, including all system components. Leaving no exception, the EAM4X30L14A horizontal coil is a superior option for almost any application while maintaining the entire unit's efficiency with a factory-integrated TXV kit for enhanced energy optimization. With its unique performance features along with its ability to be applied in any orientation, this coil is a superior option for your home's comfort.
The ACiQ EAM4X30L14A is rated for up to 2.5 tons of heating and cooling. With its ability to be installed with either an AC-only condenser or a heat pump condenser, this unit is ideal for many applications. In some packages, this coil will be larger than its paired condenser, which will increase the overall efficiency of the entire unit, but the coil should never be smaller than its paired condenser. Please note that this item cannot operate independently from a compatible condenser and blower or furnace, each available at an additional cost.
ACiQ offers a 10 year parts warranty on their coils when they are installed following your state and local codes, as well as the system is paired with a certified system matchup. Please note that in order to obtain the entire length of this warranty, the entire unit must be registered through the manufacturer.
Inverter Condenser - Inverter technology changes AC power to DC, allowing the compressor inside your condenser to speed up and slow down. This allows the system to self-adjust BTU output based on demand. As the weather changes, so will your system output.
Learning System - This system is packed with sensors and controls air temperature inside and outside, system performance, duct pressure, refrigerant temperature. The first time you start your system it enters a learning mode keeping air moving across the sensors and storing information so future startups and run cycles will be at max efficiency.
Size for Cooling - The self-adjusting inverter design allows you to size your system based on cooling demand. The ACiQ Next Gen 2.5-ton heat pump system automatically adjusts to run like a 2 ton or a 1 ton to keep you cool and dry.
With an efficiency rating of 15.2 SEER, the variable output ACIQ-30-AC-UPG will keep you comfortable across a wide range of conditions. Use our handy size calculator Here to determine the demand for your home. This system can operate anywhere from 12,000 BTU to 30,000 BTU without short cycling.
State-of-the-Art manufacturing is behind every ACiQ product, resulting in quiet, effective operation over a long service life. Most models have low ambient heating and cooling.
ACiQ saves you money up front, but also over time by reducing energy bills. Every ACiQ condenser features a variable inverter twin rotary compressor, lowering wear and increasing performance. Compare specs against other brands in the same price category, and you will agree, ACiQ is the best value.
Intelligent design goes into every element of ACiQ’s manufacturing ensuring flawless performance for years. Low friction, variable inverter twin rotary compressors give bulletproof reliability. Register equipment at ACiQ.com to extend warranty protection to 7 years parts, 12 years compressor.
| 66,000 BTU 80% AFUE Single Stage Multi-Positional ACiQ Gas Furnace | |
|---|---|
| SKU | N80MSN0701412A |
| Weight | 114.000000 |
| AHRI Certificate Number | 213146206 |
| Exhaust Flue Requirement | Metal |
| Manufacturer | ACiQ |
| Replaces | N80ESN0701412A |
| Equivalent | Carrier Equivalent: 58SB0A070E14--12 Tempstar Equivalent: TN80ESN0701412A Bryant Equivalent: 810SA36070E14 |
| Furnace Efficiency / AFUE | 80% |
| Heating BTU | 66,000 |
| Blower Motor | Multi 18-Speed Constant Torque (MCT) ECM Motor |
| Maximum CFM | 1075 |
| Motor RPM | 1050 |
| Horsepower | .33 HP |
| Configuration | Upflow/Downflow/Horizontal |
| Max Breaker Size | 15 Amps |
| Connection | 1/2" NPT |
| Maximum Inlet Pressure | 13.6"wc |
| Burner Stages | Single |
| Ignition Type | Direct Ignition with Silicon Nitride Hot Surface Ignitor |
| Fuel Type | Propane, Natural Gas |
| Certification | AHRI Certified |
| Height | 33 1/3" |
| Width | 14 3/16" |
| Depth | 29" |
| Warranty | 20 Year Heat Exchanger and 10 Year Parts with Online Registration |
| Resources | You will need Adobe® Acrobat® Reader to view PDF documents. |
| Safety Information |
This gas appliance requires a trained technician to install. Improperly connecting gas lines or improperly connecting a gas flue or venting may result in death. By purchasing this item, you are agreeing that you are using a trained technician to install this gas appliance. We will not be responsible for any injury or property damage arising from improper service or service procedures. Whoever installs or services this unit assumes responsibility for any personal injury or property damage which may result. Many jurisdictions require a license to install this equipment.
PROPOSITION 65 WARNING |
| 2.5 Ton 14.3 SEER2 ACiQ Air Conditioner Condenser | |
| SKU | R4A5S30AKAWA |
| Weight | 186.000000 |
| Manufacturer | ACiQ |
| Replaces | R4A430GK, R4A530GK |
| Equivalent | Tempstar Equivalent: R4A530GKB |
| Cooling BTU | 30,000 |
| Maximum CFM | 990 |
| Decibel Level (dBA) | 73 |
| Propeller Diameter | 24 inches |
| Motor RPM | 1100 |
| Horsepower | .1 |
| Energy Star | Yes |
| Refrigerant | R410A |
| SEER2 | 14.3 |
| Condenser Stages | Single Stage |
| Compressor Type | Scroll |
| Liquid Valve Size | 3/8" |
| Suction Valve Size | 3/4" |
| Electrical | 208 / 230 V. 1 Phase 60 Hz |
| Max Breaker Size | 25 amps |
| Amperage Requirement | 25 amps |
| Tonnage | 2.5 Ton |
| Height | 35 1/16" |
| Width | 31 3/16" |
| Depth | 26 3/4" |
| Warranty | 10 Year Parts with Online Registration |
| Resources | You will need Adobe® Acrobat® Reader to view PDF documents. |
| Safety Information | PROPOSITION 65 WARNING |
| ACiQ 2.5 Ton 14" Width Multi-Positional Evaporator Cased Coil | |
| SKU | EAM4X30L14A |
| Weight | 58.000000 |
| Manufacturer | ACiQ |
| Equivalent | Carrier Equivalent: CAPMP3014ALA Tempstar Equivalent: EAM4X30L14A Bryant Equivalent: CAPMP3014ALA |
| Configuration | Multi-Positional |
| Refrigerant | R410A |
| Liquid Line | 3/8" |
| Suction Line | 3/4" |
| Tonnage | 2.5 Ton |
| Style | A-Coil |
| Certification | UL Listed |
| Height | 25 13/16" |
| Width | 14 3/6" |
| Depth | 20 5/8" |
| Warranty | 10 Years Parts Warranty with Online Registration |
| Resources | You will need Adobe® Acrobat® Reader to view PDF documents. |
| Safety Information | PROPOSITION 65 WARNING |
| 2.5 Ton ACiQ AC Inverter Upgrade | |
| SKU | ACIQ-30-AC-UPG |
| Weight | 161.160000 |
| Manufacturer | ACiQ |
| Refrigerant | R410A |
| Safety Information | PROPOSITION 65 WARNING |
