2 Ton 14.3 SEER2 Trane Heat Pump Condenser - R454B Single Stage - RT Series

By

Trane

In stock
Model

A5HP4024A1

ID

174629

$2,452.00
 
Free Shipping
Product Features
  • Well-suited for small homes in various climates
  • Single stage condenser
  • Efficient electric heat for replacing gas usage on cooler days
  • Pre-charged with R454B refrigerant

OVERVIEW

The RunTru by Trane A5HP4024A1 is a standard heat pump condenser. Designed with comfort in mind and an inexpensive option for nearly any application, this condenser is considered a good all-around option for almost any application.

QUICK FACTS

  • 2 ton, 14.3 SEER2 heat pump condenser
  • Proudly Made in the USA: High-quality HVAC equipment crafted with precision and reliability
  • Can heat and cool up to a small house in average conditions
  • Single stage compressor

2 Tons

The RunTru by Trane A5HP4024A1 heat pump condenser has an output of 2 tons, generally enough to heat and cool up to a small house in ideal climates. In many system configurations, the tonnage of the unit's paired coil or air handler will be larger in tonnage than this condenser, which maintains the efficiency of the unit. Please note that this condenser cannot function on its own, and it needs an indoor coil or air handler to work. This unit will also only heat down to around 35°F, and if you need heat any lower than this, a backup heat strip will be needed to act as straight electric heating in a compatible air handler.

14.3 SEER2

The RunTru by Trane A5HP4024A1 heat pump condenser is rated at 14.3 SEER2, making it between 5-7% more efficient than standard 13.4 SEER2 units, saving you money in electric bills over the entire lifetime of your unit. In general, heat pumps will heat more efficiently than straight electric furnaces.

Disclaimer: This condenser contains R454B refrigerant, which is classified as an A2L refrigerant. To comply with safety standards, this unit must be paired with an R454B air handler or evaporator coil equipped with a leakage detection system. Failure to comply with these requirements may result in safety hazards and could void the warranty. Please call us at 1-888-557-9206 if you have any questions.

More Information
2 Ton 14.3 SEER2 Trane Heat Pump Condenser - R454B Single Stage - RT Series
SKUA5HP4024A1
Weight (in lbs)162.000000
Brand/ManufacturerTrane
Product FeaturesNew Refrigerant Compliant
HSPF27.8
Cooling BTU24,000
Heating BTU24,000
Maximum CFM2980
Motor RPM850
RefrigerantR454B
SEER2 (Efficiency)14.3
Condenser StagesSingle Stage
Liquid Valve Size5/16"
Suction Valve Size3/4"
Electrical208/230v 1 Phase 60Hz
Max Breaker Size25 Amps
Min. Breaker Size15 Amps
Tonnage2 Ton
Height32.6"
Width29.8"
Depth29.8"
Warranty10 Year Compressor, Outdoor Coil, and Parts with Online Registration
Resources You will need Adobe® Acrobat® Reader to view PDF documents.
Safety InformationPROPOSITION 65 WARNING
You're reviewing:2 Ton 14.3 SEER2 Trane Heat Pump Condenser - R454B Single Stage - RT Series
Your Rating
Customer Questions
What happens if this breaks down?
HVACDirect.com gives you lifetime tech support. Many common problems can be solved with a phone call to us. HVACDirect.com is an authorized dealer of ACiQ, therefore equipment we sell carries the full manufacturer's warranty. The warranty applies to all parts. You have to register the products online in order to extend the warranty to the full 10 years, otherwise the term is 5 years. If a part fails under warranty, you will not pay anything for the replacement part. Should a part fail under warranty, the first step is to have a professional confirm what part needs to be replaced. Then, contact us at customerservice@hvacdirect.com or by calling and asking for customer service.
What happens if this breaks down?
HVACDirect.com gives you lifetime tech support. Many common problems can be solved with a phone call to us. HVACDirect.com is an authorized dealer of ACiQ, therefore equipment we sell carries the full manufacturer's warranty. The warranty applies to all parts. You have to register the products online in order to extend the warranty to the full 10 years, otherwise the term is 5 years. If a part fails under warranty, you will not pay anything for the replacement part. Should a part fail under warranty, the first step is to have a professional confirm what part needs to be replaced. Then, contact us at customerservice@hvacdirect.com or by calling and asking for customer service.
What happens if it arrives damaged?
If you are present during drop-off and you see obvious signs of damage or rough handling in transit - please ask the driver to wait while you inspect the equipment. If it is damaged badly enough that you believe it can not function, you have the right to refuse the damaged portion of the shipment. If you discover the damage after the driver has left, take photos of the damage and send them to customerservice@hvacdirect.com. Please refer to your order number in the email. This starts the process and one of our representatives will be in touch with you promptly.
How can I find an installer?
It’s easier than you think – the key is to find an independent contractor or small company as opposed to a larger HVAC service. A one or two person outfit will do the work more quickly and cheaply than a bigger company, too. Yelp.com, Thumbtack.com, and Porch.com are websites are designed to help you connect with a professional in your area. You could also place a call to the last professional who did work on your home and see if they have any recommendations.
Should I order a new lineset?
Our top recommendation – protect your investment by replacing your lineset when you replace your air conditioning. Leftover oil and or contaminants in the old lineset can enter your new system and reduce the lifespan. If, on the other hand, you wish to avoid replacing the lineset, we do carry flush kits to clean out incompatible oils and contaminants.
Which models are treated for coastal climates?
All of our Trane condensers are approved for coastal installations. For these locations, Trane recommends giving them a monthly rinse with fresh water to maintain their finish. If you have any further questions, please call us and we will be happy to assist you.
Where is RunTru by Trane HVAC equipment made?
RunTru by Trane HVAC equipment is manufactured in the United States. Trane’s production facilities, including those in Texas and Georgia, produce RunTru units, ensuring quality and reliability under the Trane brand.
Did you find what you were looking for?