3 Ton 14 SEER 90,000 BTU ACiQ Gas Packaged Unit-R410A

3 Ton 14 SEER 90,000 BTU ACiQ Gas Packaged Unit-R410A
Customer reviews
Rating:
5 out of 5
Out of stock
By

ACiQ

Out of stock
Model

PGS436090KGP0G

ID

57350

OVERVIEW

ACiQ offers durable units with outstanding warranties and quality of comfort. The PGS436090KGP0G is no exception to ACiQ superiority, and with its quiet operation and installation application potential, this unit can provide reliable comfort for many years to come.

QUICK FACTS

  • 3 Ton, 90,000 BTU Gas Packaged Unit
  • 14 SEER, 81% AFUE
  • Built-in TXV kit and an ECM blower motor for enhanced efficiency
  • Quiet operation
  • Enhanced dehumidification mode
  • Multi-positional installation

3 Tons 14 SEER, 90,000 BTU 81% AFUE

The ACiQ PGS436090KGP0G has a cooling output of 3 tons, and a heating input of 90,000 BTU. When running the air conditioner on this unit, the unit's electrical efficiency is rated at 14 SEER, the standard efficiency on the market today. On the heating side of the unit, the gas efficiency is rated at 81% AFUE, which means that 81% of the fuel going into the furnace is used to heat your home, and the remaining 19% is used up and lost out of the flue venting during normal operations. This gas efficiency rating also turns the 90,000 BTU input into a 72,900 BTU output.

Warranty

ACiQ covers these gas packaged units with their standard 10-year parts warranty, as well as an exceptional 3-year no hassle replacement warranty, giving you the peace of mind that if you have a problem, they have a plan. On top of these warranties, ACiQ also includes a lifetime (20-year) heat exchanger warranty that is covered even if the unit's property changes ownership thanks to its fully-transferrable and customer-friendly support. Please note that for all warranties, installation following your state and local codes is required, and the unit must be registered through the manufacturer.

Durability and Reliability

With its tin-coated copper evaporator coil, the ACiQ PGS436090KGP0G is durable enough to withstand general wear-and-tear. Moreover, the unit also has safety switches to prevent damage from malfunctions, as well as the base has integrated full perimeter steel base rails to further secure the unit in place. Along with other system features, these give you the peace of mind that this system can be relied upon when you need it most.

Installation and Maintenance

The ACiQ PGS436090KGP0G can be installed on your roof or next to your home, as it has two outlet options that can be used. For easy service access, there are multiple control panels and maintenance access panels to make sure you can fix your unit should the need arise.

More Information
3 Ton 14 SEER 90,000 BTU ACiQ Gas Packaged Unit-R410A
FeatureSpec
SKUPGS436090KGP0G
Weight (in lbs)376
Brand/ManufacturerACiQ
Equivalent

Carrier Equivalent: 48VL-E360903

Tempstar Equivalent: PGS436090KGP0G

Bryant Equivalent: 577ENWE36090

Furnace Efficiency / AFUE 80%
Cooling BTU36,000
Heating BTU90,000
Blower MotorHigh Efficiency ECM
RefrigerantR410A
SEER1 (Efficiency)14
EER12
Condenser StagesSingle Stage
Compressor TypeScroll
Electrical208 / 230 V. 1 Phase 60 Hz
Tonnage3 Ton
Height46-1/8"
Width48-3/16"
Depth32-5/8"
Warranty10 year parts, lifetime heat exchanger, 3 year unit replacement if compressor fails
Resources You will need Adobe® Acrobat® Reader to view PDF documents.
Safety InformationPROPOSITION 65 WARNING
Top reviews
  1. Well built
    Service
    100%
    Quality
    100%
    Price
    100%
    We recently installed my new unit. It has a clean, well-built, strong appearance and was easy to install. The packing and shipping was especially well done with the pallets and binders.

    Review by

    Posted on

  2. Love it
    Quality
    100%
    Price
    100%
    Service
    100%
    The Pros: Holding this unit for 3 months and just put it in! Installation was super easy! So quiet you can hardly hear it run. Highly recommend this unit for sure! Thank you HVACDirect.

    The con(s): The square to round 14" adapter does not really fit this unit the best. Instead of square, it should be more rectangle to fit.

    Nonetheless, 5 star rating from me!!

    Review by

    Posted on

  3. Works really well
    Price
    100%
    Service
    100%
    Quality
    100%
    I installed the unit and it works really well. I am very happy with the selection and it worked out great even getting the 4 foot electrical connection. I end up doing the whole job myself.

    Review by

    Posted on

  4. Very happy
    Price
    100%
    Service
    100%
    Quality
    100%
    I am very happy with my unit and would recommend to family and friends.

    Review by

    Posted on

  5. Great company
    Price
    100%
    Service
    100%
    Quality
    100%
    Great company no problem getting what I needed thank you very much

    Review by

    Posted on

  6. It was great!
    Price
    100%
    Service
    100%
    Quality
    100%
    It was great!

    Review by

    Posted on

Customer Questions
Who makes ACiQ?
ACiQ air conditioning systems, standard heat pumps, and gas furnaces are manufactured by the largest HVAC manufacturer in America, who also happens to be the seller of the nation’s #1 brand. However, because our prices are SO LOW, they will not allow us to mention their name! They must protect their current market share where typical home systems retail between $15,000 to $25,000 for the identical equipment that we let you buy direct for under $3,000. We offer homeowners and contractors the highest quality and best warranty HVAC systems in the industry at the absolute lowest price. With our industry-leading, high-tech ACiQ equipment, your home and your savings just got a whole lot smarter!
What happens if this breaks down?
HVACDirect.com gives you lifetime tech support. Many common problems can be solved with a phone call to us. HVACDirect.com is an authorized dealer of ACiQ, therefore equipment we sell carries the full manufacturer's warranty. The warranty applies to all parts. You have to register the products online in order to extend the warranty to the full 10 years, otherwise the term is 5 years. If a part fails under warranty, you will not pay anything for the replacement part. Should a part fail under warranty, the first step is to have a professional confirm what part needs to be replaced. Then, contact us at customerservice@hvacdirect.com or by calling and asking for customer service.
What happens if it arrives damaged?
If you are present during drop-off and you see obvious signs of damage or rough handling in transit - please ask the driver to wait while you inspect the equipment. If it is damaged badly enough that you believe it can not function, you have the right to refuse the damaged portion of the shipment. If you discover the damage after the driver has left, take photos of the damage and send them to customerservice@hvacdirect.com. Please refer to your order number in the email. This starts the process and one of our representatives will be in touch with you promptly.
How can I find an installer?
It’s easier than you think – the key is to find an independent contractor or small company as opposed to a larger HVAC service. A one or two person outfit will do the work more quickly and cheaply than a bigger company, too. Yelp.com, Thumbtack.com, and Porch.com are websites are designed to help you connect with a professional in your area. You could also place a call to the last professional who did work on your home and see if they have any recommendations.
Are you able to arrange shipping to Canada?
We cannot ship directly to you but what we can do is ship to a border store and it can continue from there. If you have any further questions, please call us and we will be happy to assist you.
Can this unit can be installed and used in California?
This unit can be installed in California, however, you will have to pay a $450 mitigation fee due to this furnace not meeting the SCAQMD Rule 1111 14 ng/J NOx emission limit. The purpose of Rule 1111 is to reduce NOx emissions from fan-type central furnaces and applies to manufacturers, distributors, sellers , and installers of residential and commercial fan type central furnaces. If you would like to know more information about Rule 1111 or have any further questions, we recommend that you give us a call. Thanks.
Do you sell plenums for package units?
You do not use a formal plenum with a packaged unit. What you would use depends on the type of home or building its conditioning. Where the unit is set up is also a key component. If the packaged unit is installed on the ground beside a building, you can optionally use square-to-round adapters to connect the unit to your building. Please note that these adapters are required for Mobile and Manufactured Homes. If the packaged unit is installed on top of a building, a roof curb is required. These adapters and roof curbs are what a packaged unit would use instead of a plenum. If you have any further questions, please call us and we will be happy to assist you.
What is the minimum SEER allowed in Texas?
For gas packaged units, the PGS436090KGP0G is allowed to be purchased and installed in Texas. Texas and the rest of the southern states require any new packaged unit installations to have a minimum SEER rating of 14 or SEER2 rating of 13.4. If you have any further questions, please call us and we will be happy to assist you.
Did you find what you were looking for?
Why Choose ACiQ?
Why Choose ACiQ?

ACiQ designs AC systems that are based on principles learned from nature: clean, energy-efficient, and quiet. ACiQ systems are built in a such a way that they are easily adapted to fit multiple variations a homeowner needs. ACiQ offers technology in mini-split and full split inverter system offerings that provide the smartest way to buy and save on your home’s comfort solution, so that it meets the needs of your family. ACiQ specializes in home comfort, regardless of your needs.

blockboard tech