5 Ton 13 SEER 96% AFUE 120,000 BTU Goodman Gas Furnace and Air Conditioner System - Horizontal

OVERVIEW

With top of the line technology at high efficiency, two stage burner, and variable speed blower motor, the GMVC961205DN gas furnace is another masterpiece by Goodman. With enhanced durability and reliability, you can expect this Goodman gas furnace to perform well throughout its entire life and keep money in your pocket.

QUICK FACTS

• This furnace is ideal to heat a larger house (in average climate conditions)
• 120,000 BTU 96% AFUE two stage variable speed natural gas furnace
• Requires plastic/PVC flue venting
• Can be used in the upflow or horizontal orientation
• Can be converted to propane with an LP conversion kit (sold separately)
• Innovative design for electrical efficiency, safety, and lower sound output

120,000 BTU

The GMVC961205DN Goodman gas furnace has an input of 120,000 BTU’s. The output of the unit, determined by the input times the efficiency, is 115,200 BTU’s. This output makes this furnace suitable for most larger houses in average climate conditions.

96% AFUE

With one of the highest efficiency ratings available, the GMVC961205DN gas furnace is 96% efficient. At this efficiency, the GMVC961205DN uses only 4% of its gas to operate the furnace itself and 96% of the gas going into the furnace to make your home warm and comfortable. With high-efficiency furnaces such as this one, the flue venting must be plastic or PVC.

Allowing for a more precise air flow output to best suit your home’s needs at a moment’s notice, the variable speed motor on the GMVC961205DN is the best blower motor that Goodman has to offer. The two stage burner on the furnace allows for a lower output and a higher output for a more precise heat output as needed by your thermostat. Both of these high-end features allow for a small increase in efficiency, but the primary benefits are enhanced comfort and a more stable temperature throughout any season of the furnace’s use.

The GMVC961205DN comes standard with Goodman’s 10 year parts warranty and its exceptional lifetime heat exchanger warranty. In order to maintain this warranty, the installation must follow your state and local codes and the unit must be registered online via Goodman’s website.

The heavy-duty tubular heat exchanger on the GMVC961205DN Goodman gas furnace is designed for constant winter use to provide peace of mind thanks to its enhanced reliability. The aluminized steel design of this heat exchanger provides a faster and more efficient heat transfer rate. Moreover, the outer casing on the unit is a heavier gauge of steel, protecting the internals of the furnace and lowering air leakage and furnace operation noise. All of these features enhance comfort and provide durability and reliability for the lifetime of the unit.

The GMVC961205DN furnace runs on natural gas from the factory. When you field-install the optional LP conversion kit (found here at an additional cost), this furnace can use propane instead when the installation requires it. This Goodman furnace is also able to be installed in the upflow or horizontal positions, allowing for a more versatile application potential.

Line sets are the copper lines which connect an outdoor condensing unit/heat pump to an inside air handler or evaporator coil. Line sets are available in different lengths and diameters to fit most applications.

OVERVIEW

The Goodman CHPF4860D6 evaporator coil is designed for any installations that the coil needs to sit on its side, in the horizontal position. With its enhanced comfort and superior efficiency design, the CHPF4860D6 is an inexpensive yet quality choice for you.

QUICK FACTS

• 4 to 5 ton evaporator coil
• Installable in the horizontal configuration
• Usable with either a heat pump or an AC-only condenser
• Works with R410A or R22 refrigerant
• Low air leakage
• Check flowrater expansion device for use in any application

4 to 5 Tons

At an output of 4 to 5 tons, the Goodman CHPF4860D6 evaporator coil is ready for almost any horizontal installation at that size. In many situations, a condenser that is paired with the condenser is going to be smaller than this coil. This is intentional and is to maintain the overall unit’s efficiency.
Please note that for this coil to function, a furnace or blower and a condenser is required, all sold separately. This coil is not designed to replace a coil in a single-piece air handler.

Warranty

The CHPF4860D6 coil is covered under Goodman’s standard 10 year parts warranty when the unit is installed following your state and local codes, the coil is paired with a compatible R410A condenser, and the entire system is registered online through the manufacturer.

The Goodman CHPF4860D6 evaporator coil is designed with a durable outer casing and a rust-resistant drain pan to lower general wear and tear to make sure the coil works for years to come. To ease installation, the unit is designed to be slim and able to fit in many crawl spaces and attics, and with its foil-face insulation making the unit’s air leakage minimal, installation location does not necessarily have to be insulated for normal temperature operations. For maintenance, the coil has a split-seam on the front of it for easier access.

OVERVIEW

The Goodman GSX130601 is a cooling-only condenser unit. Providing a 13 SEER efficiency with a single stage, reciprocating compressor, the GSX130601 is an inexpensive condenser to cool your home when paired with an AC coil.

QUICK FACTS

• Ideal size to cover a larger house
• 5 ton, 13 SEER AC-only condenser
• Low sound output
• Fully charged for up to 15' of line set
• Factory-installed filter drier

5 ton

The GSX130601 condenser is a 5 ton AC only unit. In an ideal climate situation, the GSX130601 can usually cover a larger house. For this unit to function, an indoor air handler or coil is required, and this unit is cooling only with no heating capacity on its own.

13 SEER

The Goodman GSX130601 AC condenser is designed to be 13 SEER. This is the lowest efficiency on the market today, making it an inexpensive option for northern states. Please note that this product is regulated by DOE Efficiency Standards.

Due to new efficiency requirements, this unit cannot be installed in the following states: Alabama, Arizona, Arkansas, California, Delaware, Florida, Georgia, Kentucky, Louisiana, Maryland, Mississippi, Nevada, New Mexico, North Carolina, Oklahoma, South Carolina, Tennessee, Texas, and Virginia.

Warranty

The GSX130601 condenser comes with Goodman's standard 10 year parts warranty with online registration through the manufacturer. An installation that follows your state and local codes is required for the warranty to be upheld.

Durability and Reliability

With an enhanced copper tube and aluminum fin coil, the GSX130601 is designed to prevent coil degradation. With the baked-on powder-paint finish, the condenser's heavy-gauge galvanized-steel cabinet is approved for up to 500 hours of salt-spray. The factory-installed filter dryer lowers general wear-and-tear on the unit. All of these features provide you with a durable, reliable condenser to be used whenever you need to cool your home.

Installation and Maintenance

The Goodman GSX130601 AC condenser comes standard with service valves that have sweat connections and easy-access gauge ports, both providing a lower installation difficulty and time to lower installation costs. The outer casing has both a top and a side access to allow for easier maintenance and warranty access when necessary.

Comfort in Mind

The Goodman brand always has its customer's comfort in mind. The GSX130601 is no exception, with not only using high-quality components but also providing enhanced sound-dampening features that allows the brand to manufacture some of the lowest sound output levels in the industry.

Line sets are the copper lines which connect an outdoor condensing unit/heat pump to an inside air handler or evaporator coil. Line sets are available in different lengths and diameters to fit most applications.