COMPETITIVE PRICING
We sell products at wholesale pricing. No markups, no hidden fees. Our average customer saves BETWEEN THREE TO SIX THOUSAND DOLLARS
-That's the Direct Advantage!
In stock
AHRI Number:208680714
A Goodman combination system is a great choice to keep your home warm all season long. With tons of extra features and a great price, a Goodman furnace and air conditioning system is the perfect choice for all of your heating and cooling needs.
The GM9S801005CN Goodman gas furnace features high-quality construction and efficient operation at a great value. The GGM9S801005CN single-stage, 9-speed furnace utilizes Goodman's superior heat exchanger design to provide efficient, reliable heating to your home. If you're looking to cut your energy bills and improve your comfort without breaking the bank, your search stops with the Goodman GM9S801005CN.
The GM9S801005CN Goodman gas furnace is 100,000 BTU’s. This BTU count is a measure of the input of the furnace per hour, while the output of this furnace is 80,000 BTU’s (100,000 X 80% AFUE) per hour. In ideal climate conditions, this 100,000 BTU furnace is usually used to heat a larger house.
The GM9S801005CN Goodman gas furnace is 80% efficient, and the standard furnace efficiency on the market today. This means that 80% of the gas going into the furnace is used to heat your home and the remaining 20% is lost out of the flue venting. Please note that all 80% furnaces must be vented using metal flue venting, while anything higher than 90% efficient must be vented using plastic/pvc venting.
Please note that this furnace does not comply with California Low NOx or Ultra-Low NOx regulations. If you have any questions, please contact us.
The GM9S801005CN Goodman gas furnace is a single stage furnace has only one heat output. Regardless of the indoor temperature, this furnace will burn at 100% output whenever the thermostat calls for it. Like a light switch, this furnace’s burner will either be on or off and nothing in between. A single stage furnace is the standard efficient furnace since every time your furnace turns on the furnace uses the same amount of energy.
From the factory, the GM9S801005CN runs on natural gas. However all Goodman gas furnaces can be converted to propane using the furnace’s corresponding LP conversion kit, an optional accessory at an additional cost that consists of a replacement set of orifices and springs.
Instead of the last generation PSC blower motor, the GM9S801005CN utilizes a 9-speed ECM motor, which uses less power and provides smarter air circulation. All of this causes an overall increase in the electrical efficiency of your furnace, which saves you money.
With installation that follows your state and local codes and with online registration, all Goodman furnaces come with a 10-year parts and lifetime heat exchanger warranty through the manufacturer.
The hot surface igniter on modern Goodman furnaces are more durable than previous designs, decreasing related issues and lowering maintenance costs. These hot surface ignitors are also more efficient than standing pilot and older HSI designs, saving you even more money.
The Goodman brand has improved technology from years of production experience, allowing for a long-lasting product that rarely has any issues. However, if something does go wrong on the furnace, the control board has a set of sensors that allow it to diagnose basic issues, allowing for easy troubleshooting and to notify the owner if basic maintenance or warranty work is recommended. This increases the overall safety of the unit, for the furnace itself and the occupants of the home where it is installed.
The heavy-gauge steel cabinet on new Goodman furnaces provide adequate protection to the internal mechanisms of the unit. The cabinet is also more air-tight than previous models, allowing for a quiet, more economical unit due to losing less heat and preventing more sound from exiting the unit.
The value of modern Goodman furnaces doesn't end at efficiency. Today’s Goodman furnaces feature many different connection options to reduce installation. The GM9S801005CN model has a more universal design, which consists of its ability to be installed in both an upflow or horizontal configuration. This allows for an easier installation in more locations, from your attic to your basement. The furnace also comes with color-coded low-voltage terminals that allow for a shorter and easier installation time, which decreases installation costs.
With the CAPF4961C6 evaporator coil, Goodman provides an enhanced comfort to your home. With its ability to work with AC-only systems or with heat pumps and its ability to be installed in both the upflow or downflow orientations, the CAPF4961C6 is designed to be versatile in design and to provide an efficient comfort at a low cost.
The Goodman CAPF4961C6 evaporator coil is rated for a 4 to 5 ton output. In many system configurations, this coil may be larger in tonnage than its paired condenser. This is intentional, to maintain the overall efficiency of the entire system.Please note that in order for this coil to function, a furnace or blower and a condenser is required, all sold separately.
The CAPF4961C6 coil is covered under Goodman’s standard 10 year parts warranty when the unit is installed following your state and local codes, the coil is paired with a compatible condenser, and the entire system is registered online through the manufacturer.
The Goodman CAPF4961C6 evaporator coil is able to be installed in upflow and downflow applications. With its rust-resistant, thermoplastic drain plan, water retention rate is significantly lower than previous models. For even more enhanced durability, the cabinet is made of a strong galvanized-steel with a leather-grain finish. If you ever need to perform maintenance on your coil, there is a split-seam on the front of the casing for easy internal access. Please note that this coil will not work as a replacement for any single-piece air handler coils.
The CAPF4961C6 evaporator coil’s foil-faced insulation lowers air leakage, increasing the amount of air flow going into your ductwork, keeping you more comfortable while decreasing the unit’s run time. With compatible equipment, the CAPF4961C6 evaporator coil lives up to Goodman’s enhanced comfort and efficiency standards at a reasonable price.
Goodman has always set its goals at superior comfort at a high efficiency, all the while balancing the unit's cost. The GSXH506010 is no exception, with its durability, reliability, and one of the highest efficiencies available.
The GSXH506010 AC-only condenser is 5 tons, normally enough to cover up to a smaller house. Please note that in some cases, the system bundle pairs this unit with a larger tonnage coil to maintain the system's efficiency.
The GSXH506010 condenser is designed to be up to 15.2 SEER2 in ideal system configurations. Considered a high-efficiency, 15.2 SEER2 is around 12% more efficient than a 14.3 SEER2 system, saving you a lot of money in energy bills. 15.2 SEER2 efficiency ratings tend to be where cost meets efficiency, and is normally the best value for the efficiency.
The GSXH506010 condenser comes with Goodman's standard 10 year parts warranty with online registration through the manufacturer. An installation that follows your state and local codes is required for the warranty to be upheld.
The cabinet of Goodman's condensers are manufactured out of heavy-gauge galvanized-steel with a baked-on painted finish that is approved for 500 hours of salt spray. The durable cabinet of the GSXH506010 is also compliant with 2010 Florida building code integrity requirements for hurricane-strength weather.
For easier maintenance, Goodman designed the GSXH506010's cabinet with two maintenance access panels - one on the top and one on the side. For easier installation, the GSXH506010 is made with easy-access gauge ports and service valves with sweat connections. Both of these lower installation and maintenance times and costs, keeping money in your pocket for the things you care about most.
Superior comfort has always been the primary goal for Goodman. The GSXH506010 follows this goal, made with high-quality parts and even designed to have one of the lowest sound outputs on the market, thanks to superior sound-dampening and insulation technology. All of this makes you comfortable and lowers your bills while staying in-budget.
Thermostatic Expansion Valves (TXVs) are:
Your system will operate better and with higher efficiency with a TXV kit. This kit offers more control over how much liquid refrigerant enters the evaporator coil. The valves only allow a certain amount of liquid into the coil to make sure that all liquid that enters completely evaporates. This allows for the prevention of too little liquid from entering the evaporator which would make the system run less efficiently. It also stops too much liquid from entering the evaporator which can cause excess in the lines. Thermostatic Expansion Valves are provide multi-position mounting on the evaporator coil inlet and are consistent, efficient and virtually hassle-free. Select the TXV to match the tonnage of your air conditioner or heat pump, as well as to match the type of refrigerant your systems uses, R-22 (standard) or R-410A (new alternative)
This capacitor gives an extra "jolt" of electricity upon startup to push the refrigerant against higher head pressures that are present with a TXV system. When using a TXV, manufacturer's recommend also installing a hard-start in your heat pump or condenser. If a hard-start capacitor is not installed, the equipment compressor has a possibility of having trouble getting started.
Please note that this is not an exhaustive list. Use Ctrl+F to simplify your search. This part is compatible with the following models:
GSXC704810 GSXC706010 GSXH504210 GSXH504810 GSXH506010 GSXB404210 GSXB404810 GSXB406010 GSXN404210 GSXN404810 GSXN406010 GSXN3N4210 GSXN3N4810 GSXN3N6010 GSZH504210 GSZH504810 GSZH506010 GSZB404210 GSZB404810 GSZB406010
100,000 BTU 80% AFUE 9-Speed Single Stage Goodman Gas Furnace - Upflow/Horizontal | |
---|---|
SKU | GM9S801005CN |
Weight (in lbs) | 132.000000 |
AHRI Certificate Number | 207254791 |
Airflow Direction | Upflow/Horizontal |
Exhaust Flue Requirement | Metal |
Brand/Manufacturer | Goodman |
Furnace Efficiency / AFUE | 80% |
Heating BTU | 100,000 |
Blower Motor | 9 Speed |
Maximum CFM | 2000 |
Configuration | Upflow/Horizontal |
Electrical | 115 V. 1 Phase 60 Hz |
Phase | Single Phase |
Burner Stages | Single |
Fuel Type | Propane, Natural Gas |
Height | 33 3/8" |
Width | 21" |
Depth | 28" |
Warranty | 10 Years with Online Registration |
Resources | You will need Adobe® Acrobat® Reader to view PDF documents. |
Safety Information |
This gas appliance requires a trained technician to install. Improperly connecting gas lines or improperly connecting a gas flue or venting may result in death. By purchasing this item, you are agreeing that you are using a trained technician to install this gas appliance. We will not be responsible for any injury or property damage arising from improper service or service procedures. Whoever installs or services this unit assumes responsibility for any personal injury or property damage which may result. Many jurisdictions require a license to install this equipment.
PROPOSITION 65 WARNING |
4 to 5 Ton 21" Width Goodman Vertical Evaporator Cased Coil | |
SKU | CAPF4961C6 |
Weight (in lbs) | 46.000000 |
Brand/Manufacturer | Goodman |
Configuration | Upflow / Downflow |
Refrigerant | R410A or R22 |
Liquid Line | 3/8" |
Suction Line | 7/8" |
Tonnage | 5 Ton |
Style | A-Coil |
Height | 30" |
Width | 21" |
Depth | 21" |
Warranty | 10 Years with Online Registration |
Resources | You will need Adobe® Acrobat® Reader to view PDF documents. |
Safety Information | PROPOSITION 65 WARNING |
5 Ton 15.2 SEER2 High Efficiency Goodman Air Conditioner Condenser | |
SKU | GSXH506010 |
Weight (in lbs) | 305.000000 |
Brand/Manufacturer | Goodman |
Replaces | GSX160601 |
Cooling BTU | 60,000 |
Blower Motor | Two Speed ECM Motor |
Decibel Level (dBA) | 76 |
Horsepower | 0.33 HP |
Refrigerant | R410A |
SEER2 (Efficiency) | 15.2 |
Condenser Stages | Two Stage |
Compressor Type | Scroll |
Liquid Line | 3/8" |
Suction Line | 7/8" |
Electrical | 208/230v 1 Phase 60Hz |
Max Breaker Size | 50 Amps |
Min. Breaker Size | 32.4 Amps |
Tonnage | 5 Ton |
Connection | Sweat |
Height | 41 1/2" |
Width | 35 1/2" |
Depth | 35 1/2" |
Warranty | 10 Years Parts with Online Registration |
Resources | You will need Adobe® Acrobat® Reader to view PDF documents. |
Safety Information | PROPOSITION 65 WARNING |
Goodman 5 Ton Fixed TXV Kit - R-410A Refrigerant | |
SKU | 0151R00212S |
Weight (in lbs) | 2.500000 |
Brand/Manufacturer | Goodman |
Replaces | TXV-FX-KX-5T |
Refrigerant | R410A |
Safety Information | PROPOSITION 65 WARNING |