ACIQ 6 Ton 150,000 BTU 13.4 SEER2 Commercial Gas Packaged Unit - Medium Heat | 208/230V 3 Phase - R454B - Two Stage

6-Ton Medium-Heat Gas/Electric Packaged Rooftop Unit with X-Vane™ Technology for Light Commercial Applications

The ACiQ RGF072HE2A0AAA is a 6-ton gas/electric packaged rooftop unit designed for light commercial heating and cooling applications. This medium-heat configuration combines electric cooling and gas heating in a single outdoor cabinet and features direct-drive X-Vane™ fan technology with an electronically commutated motor. The unit uses R-454B refrigerant and is configured for 208/230V, three-phase electrical service.

Key Benefits

• 6-Ton Cooling Capacity – Provides nominal 6-ton packaged cooling for light commercial applications.
• 13.4 SEER2 / 15.5 IEER – Provides efficient seasonal and integrated part-load cooling performance for the RGF072 platform.
• Medium-Heat Gas Heating – Provides gas-fired heating with up to 150,000 BTU of heating input and approximately 80% AFUE for this configuration.
• Two-Stage Cooling – Provides staged cooling operation to help match system output to changing commercial loads.
• R-454B Refrigerant – Uses R-454B refrigerant in the packaged refrigeration system.
• Direct-Drive X-Vane™ Fan – Uses a Vane Axial fan with an electronically commutated motor, eliminating conventional belts, pulleys, blower bearings, and shafts.
• Medium-Static Configuration – Provides airflow capability suited to commercial duct-system requirements.
• 208/230V Three-Phase Electrical Service – Provides a three-phase electrical configuration for compatible commercial installations.
• Convertible Rooftop Design – Supports field-convertible airflow configurations for installation flexibility.

Medium-Heat Gas Heating

The RGF072HE2A0AAA uses the medium-heat gas configuration and provides up to 150,000 BTU of gas-heating input. The heating system operates at approximately 80% AFUE, providing integrated gas-fired heating for commercial applications requiring substantial heating capacity from a packaged rooftop unit.

6-Ton Two-Stage Cooling Performance

The RGF072HE2A0AAA provides nominal 6-ton cooling capacity with approximately 70,000 BTU of rated cooling capacity. The unit uses two-stage cooling and is rated at 13.4 SEER2, 11.2 EER, and 15.5 IEER for the applicable configuration. R-454B refrigerant is used throughout the packaged refrigeration system.

Efficiency and X-Vane™ Fan Technology

The direct-drive X-Vane™ indoor fan system combines a Vane Axial fan with an electronically commutated motor. Compared with conventional belt-driven fan systems, the design eliminates fan belts, pulleys, shafts, and shaft bearings, reducing the number of moving components while providing efficient indoor-air movement. The RGF072 platform is also designed for high external static capability.

Packaged Rooftop Installation Design

The packaged configuration integrates gas heating, electric cooling, refrigeration components, indoor air movement, and controls into one outdoor cabinet. The RGF072HE2A0AAA uses 208/230V, three-phase, 60 Hz electrical service. The unit is designed for rooftop or compatible ground-level installation and supports field-convertible airflow arrangements.

Controls & Comfort

The unit includes a unit control board with clearly labeled connection points to simplify installation and service. The RGF platform provides high- and low-pressure protection, a filter drier, and 2-inch filters as standard equipment. The direct-drive ECM fan system provides controlled indoor airflow, while compatible options include economizers, power exhaust, dehumidification, CO2 sensing, condensate overflow protection, and other commercial controls.

Light Commercial Applications

The ACiQ RGF072HE2A0AAA is designed for light commercial rooftop applications requiring integrated gas heating and electric cooling. Its 6-ton nominal cooling size, medium-heat gas configuration, up to 150,000 BTU heating input, 208/230V three-phase electrical service, R-454B refrigerant, and direct-drive X-Vane™ fan technology provide a complete packaged heating and cooling solution.

Service & Maintenance

The direct-drive X-Vane™ fan eliminates conventional belt, pulley, shaft, and shaft-bearing components, helping simplify routine fan maintenance. Easy-access handles provide access to commonly serviced panels, while service gauge connections allow monitoring of compressor suction and discharge pressures and filter-drier operation during maintenance. The sloped, corrosion-resistant composite drain pan is designed to shed water and resist rust.

Warranty

The RGF072HE2A0AAA is covered by applicable manufacturer limited warranty provisions for the RGF packaged rooftop product family. Applicable coverage includes a 10-year limited warranty for the aluminized heat exchanger, a 5-year limited warranty for the compressor, and a 1-year limited warranty for replacement parts, subject to the applicable manufacturer warranty certificate, installation requirements, registration provisions, maintenance requirements, and exclusions.

Recommended Accessories

• Economizer – Optional outdoor-air economizer for compatible ventilation and free-cooling applications.
• Power Exhaust – Optional exhaust system for compatible economizer installations.
• Hot Gas Re-Heat Dehumidification – Optional dehumidification system for improved part-load humidity control.
• Non-Fused Disconnect – Optional electrical disconnect.
• Condensate Overflow Switch – Optional condensate protection accessory.
• CO2 Sensor – Optional carbon-dioxide sensing for compatible ventilation-control applications.

Reliable Commercial Comfort with the ACiQ RGF072HE2A0AAA

Experience reliable year-round commercial comfort with the ACiQ RGF072HE2A0AAA. Combining 6-ton electric cooling, medium-heat gas heating, R-454B refrigerant, two-stage operation, and direct-drive X-Vane™ fan technology in a packaged rooftop system designed for light commercial applications.