1.5 Ton 16 SEER 96% AFUE 80,000 BTU Goodman Gas Furnace and Heat Pump System - Upflow

OVERVIEW

At one of the higher efficiencies on the market, the Goodman GSZ160181 heat pump condenser is designed to save you money both up front and in energy bills over time. With its high-quality construction, the GSZ160181 is considered a good all-around choice for many applications.

Utilizing advanced technology, the Goodman heat pump system efficiently transfers heat between the indoors and outdoors, providing both heating and cooling functionalities in a single unit for year-round comfort. With its straightforward installation process, it not only ensures convenience but it's also cost-efficient, making it an ideal choice for those seeking an energy-efficient and hassle-free heating and cooling solution.

QUICK FACTS

• Designed to cover a smaller house in average climates
• 1.5 ton, 16 SEER heat pump condenser
• Low sound output
• Fully charged for up to 15' of line set
• Factory-installed bi-flow filter drier

1.5 Ton

The Goodman GSZ160181 heat pump is rated for 1.5 tons, which is normally enough to cover a smaller house in average climates. A heat pump coil or air handler is required for this condenser to function, and some indoor units will be larger in tonnage than this condenser in some bundles to maintain the unit's overall efficiency.

16 SEER

With its high-end 16 SEER efficiency rating, the GSZ160181 is designed to save you money over the entire life of the unit. 16 SEER units will save you about 12% more in energy bills over a 14 SEER system, making this upgrade a smart upgrade to save you money over time with a small increase in your initial investment in the system.

Warranty

The GSZ160181 condenser comes with Goodman's standard 10 year parts warranty with online registration through the manufacturer. An installation that follows your state and local codes is required for the warranty to be upheld.

Durability and Reliability

The cabinet on the GSZ160181 heat pump is designed to be durable in harsh conditions. With its baked-on polyester coat of paint, the unit is approved for up to 500 hours of salt spray. The enhanced durability and paint coat makes the GSZ160181 compliant with 2010 Florida building codes for unit integrity for hurricane-like winds when the unit is properly anchored. For reliability, there is also a built-in bi-flow filter drier that lowers general wear-and-tear on the internals of the unit.

Installation and Maintenance

In order to provide a faster and less expensive installation, the Goodman GSZ160181 heat pump is factory-installed with pressure switches, a high-capacity muffler, easily accessible gauge ports, and service valves with sweat connections. The cabinet of the unit is also fitted with dual access panels - one on the side and one on the top - to allow for a much easier maintenance procedure should the need for maintenance arise.

Comfort in Mind

The Goodman company has always promoted enhanced comfort, higher efficiency, and lower cost to all of its units. With SmartShift technology and an enhanced sound insulation structure, the GSZ160181 is whisper-quiet, allowing Goodman to continue to follow its goals in achieving the best comfort levels possible at a low cost.

Why Buy at HVACDirect.com

HVACDirect.com is one of the leading and reliable sources for top-quality heat pump systems. With its superior energy efficiency, our heat pumps not only provide significant upfront cost savings but also ensures long-term economic benefits through reduced energy consumption. Known for delivering heat pump package units that excel in both performance and durability, we are a trusted choice for various heating and cooling needs. Our customers can confidently rely on the efficiency and effectiveness of our heat pump systems, making us a preferred destination for those seeking high-performance solutions in the HVAC industry and a trusted choice for various heating and cooling needs.

OVERVIEW

With the CAPF3137B6 evaporator coil, Goodman provides an enhanced comfort to your home. With its ability to work with AC-only systems or with heat pumps and its ability to be installed in both the upflow or downflow orientations, the CAPF3137B6 is designed to be versatile in design and to provide an efficient comfort at a low cost.

QUICK FACTS

• 2.5 to 3 ton evaporator coil
• Installable in the upflow or downflow configurations
• Usable with either a heat pump or an AC-only condenser
• Low air leakage
• Check flowrater expansion device for use in any application

2.5 to 3 Tons

The Goodman CAPF3137B6 evaporator coil is rated for a 2.5 to 3 ton output. In many system configurations, this coil may be larger in tonnage than its paired condenser. This is intentional, to maintain the overall efficiency of the entire system.
Please note that in order for this coil to function, a furnace or blower and a condenser is required, all sold separately.

Warranty

The CAPF3137B6 coil is covered under Goodman’s standard 10 year parts warranty when the unit is installed following your state and local codes, the coil is paired with a compatible condenser, and the entire system is registered online through the manufacturer.

The Goodman CAPF3137B6 evaporator coil is able to be installed in upflow and downflow applications. With its rust-resistant, thermoplastic drain plan, water retention rate is significantly lower than previous models. For even more enhanced durability, the cabinet is made of a strong galvanized-steel with a leather-grain finish. If you ever need to perform maintenance on your coil, there is a split-seam on the front of the casing for easy internal access.
Please note that this coil will not work as a replacement for any single-piece air handler coils.

The CAPF3137B6 evaporator coil’s foil-faced insulation lowers air leakage, increasing the amount of air flow going into your ductwork, keeping you more comfortable while decreasing the unit’s run time. With compatible equipment, the CAPF3137B6 evaporator coil lives up to Goodman’s enhanced comfort and efficiency standards at a reasonable price.

Line sets are the copper lines which connect an outdoor condensing unit/heat pump to an inside air handler or evaporator coil. Line sets are available in different lengths and diameters to fit most applications.

Line sets are the copper lines which connect an outdoor condensing unit/heat pump to an inside air handler or evaporator coil. Linesets are available in different lengths and diameters to fit most applications.

OVERVIEW

With top of the line technology at high efficiency, two stage burner, and variable speed blower motor, the GMVC960803BN gas furnace is another masterpiece by Goodman. With enhanced durability and reliability, you can expect this Goodman gas furnace to perform well throughout its entire life and keep money in your pocket.

QUICK FACTS

• This furnace is ideal to heat a medium-sized house (in average climate conditions)
• 80,000 BTU 96% AFUE two stage variable speed natural gas furnace
• Requires plastic/PVC flue venting
• Can be used in the upflow or horizontal orientation
• Can be converted to propane with an LP conversion kit (sold separately)
• Innovative design for electrical efficiency, safety, and lower sound output

80,000 BTU

The GMVC960803BN Goodman gas furnace has an input of 80,000 BTU’s. The output of the unit, determined by the input times the efficiency, is 76,800 BTU’s. This output makes this furnace suitable for most medium-sized houses in average climate conditions.

96% AFUE

With one of the highest efficiency ratings available, the GMVC960803BN gas furnace is 96% efficient. At this efficiency, the GMVC960803BN uses only 4% of its gas to operate the furnace itself and 96% of the gas going into the furnace to make your home warm and comfortable. With high-efficiency furnaces such as this one, the flue venting must be plastic or PVC.

Allowing for a more precise air flow output to best suit your home’s needs at a moment’s notice, the variable speed motor on the GMVC960803BN is the best blower motor that Goodman has to offer. The two stage burner on the furnace allows for a lower output and a higher output for a more precise heat output as needed by your thermostat. Both of these high-end features allow for a small increase in efficiency, but the primary benefits are enhanced comfort and a more stable temperature throughout any season of the furnace’s use.

The GMVC960803BN comes standard with Goodman’s 10 year parts warranty and its exceptional lifetime heat exchanger warranty. In order to maintain this warranty, the installation must follow your state and local codes and the unit must be registered online via Goodman’s website.

The heavy-duty tubular heat exchanger on the GMVC960803BN Goodman gas furnace is designed for constant winter use to provide peace of mind thanks to its enhanced reliability. The aluminized steel design of this heat exchanger provides a faster and more efficient heat transfer rate. Moreover, the outer casing on the unit is a heavier gauge of steel, protecting the internals of the furnace and lowering air leakage and furnace operation noise. All of these features enhance comfort and provide durability and reliability for the lifetime of the unit.

The GMVC960803BN furnace runs on natural gas from the factory. When you field-install the optional LP conversion kit (found here at an additional cost), this furnace can use propane instead when the installation requires it. This Goodman furnace is also able to be installed in the upflow or horizontal positions, allowing for a more versatile application potential.