COMPETITIVE PRICING
We sell products at wholesale pricing. No markups, no hidden fees. Our average customer saves BETWEEN THREE TO SIX THOUSAND DOLLARS
-That's the Direct Advantage!
AHRI Number:201896117
The Goodman GCVC96 furnace features a two stage gas valve, variable-speed blower motor, and provides exceptional indoor comfort and quiet operation. This furnace is compatible with the Comfortnet communicating system and is designed for downflow or horizontal configurations.
The Goodman GSZ140421 Heat Pump uses the chlorine-free refrigerant R-410A to help prevent damage to the Ozone Layer. This unit is equipped with sound-dampening features to provide operating sound levels are among the lowest in the heating and cooling industry. Using high-quality components, the Goodman GSZ140421 heat pump is rated at 14 SEER and will help reduce energy consumption throughout the life of the system.
With top of the line technology at high efficiency, two stage burner, and variable speed blower motor, the GCVC961005CN is another high-end gas furnace manufactured by Goodman. With enhanced durability and reliability, you can expect this Goodman gas furnace to perform well throughout its life to provide consistent comfort and lower the overall cost of bills to keep money in your pocket for many years to come.
The GCVC961005CN Goodman gas furnace has an input of 100,000 BTU’s. The output of the unit is 96,000 BTU’s (input X efficiency = output). This size of furnace is normally suitable for most larger houses in an ideal climate.
With one of the highest efficiency ratings available, the GCVC961005CN gas furnace is 96% efficient. At this efficiency, the GCVC961005CN uses only 4% of its gas to operate the furnace itself and 96% of the gas going into the furnace to make your home warm and comfortable. With all gas furnaces at 90% efficiency and above like this one, the flue venting must be plastic or PVC.
Allowing for a more precise air flow output to best suit your home’s needs, the motor on the GCVC961005CN is a variable speed ECM blower motor, the best blower motor that Goodman offers to date. The two stage burner on the furnace allows for a lower output and a higher output for a more precise heat output as needed by your thermostat. Both of these high-end features allow for a small increase in efficiency, but the primary benefits are enhanced comfort and a more stable temperature throughout any season of the furnace’s use.
The GCVC961005CN comes standard with Goodman’s 10 year parts warranty and its exceptional lifetime heat exchanger warranty. In order to maintain this warranty, the installation must follow your state and local codes and the unit must be registered online via Goodman’s website.
The heavy-duty heat exchanger on the Goodman GCVC961005CN gas furnace is designed for constant use to provide enhanced reliability. The aluminized steel structure of this heat exchanger allows for a faster and more efficient heat transfer rate. Moreover, the outer casing on the unit is a heavier gauge of steel, protecting the internals of the furnace and lowering air leakage and furnace operation noise. All of these features enhance comfort and provide durability and reliability for the lifetime of the unit.
The GCVC961005CN furnace runs on natural gas from the factory. When you field-install the optional LP conversion kit (found here at an additional cost), this furnace can use propane instead when the installation requires it. This Goodman furnace is also able to be installed in the downflow or horizontal positions, allowing for a more versatile application potential.
Line sets are the copper lines which connect an outdoor condensing unit/heat pump to an inside air handler or evaporator coil. Line sets are available in different lengths and diameters to fit most applications.
With the CAPF4860C6 evaporator coil, Goodman provides an enhanced comfort to your home. With its ability to work with AC-only systems or with heat pumps and its ability to be installed in both the upflow or downflow orientations, the CAPF4860C6 is designed to be versatile in design and to provide an efficient comfort at a low cost.
The Goodman CAPF4860C6 evaporator coil is rated for a 4 to 5 ton output. In many system configurations, this coil may be larger in tonnage than its paired condenser. This is intentional, to maintain the overall efficiency of the entire system.Please note that in order for this coil to function, a furnace or blower and a condenser is required, all sold separately.
The CAPF4860C6 coil is covered under Goodman’s standard 10 year parts warranty when the unit is installed following your state and local codes, the coil is paired with a compatible condenser, and the entire system is registered online through the manufacturer.
The Goodman CAPF4860C6 evaporator coil is able to be installed in upflow and downflow applications. With its rust-resistant, thermoplastic drain plan, water retention rate is significantly lower than previous models. For even more enhanced durability, the cabinet is made of a strong galvanized-steel with a leather-grain finish. If you ever need to perform maintenance on your coil, there is a split-seam on the front of the casing for easy internal access. Please note that this coil will not work as a replacement for any single-piece air handler coils.
The CAPF4860C6 evaporator coil’s foil-faced insulation lowers air leakage, increasing the amount of air flow going into your ductwork, keeping you more comfortable while decreasing the unit’s run time. With compatible equipment, the CAPF4860C6 evaporator coil lives up to Goodman’s enhanced comfort and efficiency standards at a reasonable price.
Line sets are the copper lines which connect an outdoor condensing unit/heat pump to an inside air handler or evaporator coil. Line sets are available in different lengths and diameters to fit most applications.
100,000 BTU 96% AFUE Variable Speed Goodman Gas Furnace - Downflow/Horizontal | |
---|---|
SKU | GCVC961005CN |
Weight (in lbs) | 145.000000 |
AHRI Certificate Number | 7368844 |
Airflow Direction | Downflow/Horizontal |
Exhaust Flue Requirement | Plastic / PVC |
Brand/Manufacturer | Goodman |
Furnace Efficiency / AFUE | 96% |
Heating BTU | 100,000 |
Blower Motor | Variable Speed - ECM |
Maximum CFM | 2000 |
Configuration | Downflow/Horizontal |
Flue Location | Right |
Energy Star | Yes |
Electrical | 115 V. 1 Phase 60 Hz |
Burner Stages | Two |
Fuel Type | Propane, Natural Gas |
Height | 34.5" |
Width | 21" |
Depth | 28.75" |
Warranty | 10 Years with Online Registration |
Resources | You will need Adobe® Acrobat® Reader to view PDF documents. |
Safety Information |
This gas appliance requires a trained technician to install. Improperly connecting gas lines or improperly connecting a gas flue or venting may result in death. By purchasing this item, you are agreeing that you are using a trained technician to install this gas appliance. We will not be responsible for any injury or property damage arising from improper service or service procedures. Whoever installs or services this unit assumes responsibility for any personal injury or property damage which may result. Many jurisdictions require a license to install this equipment.
PROPOSITION 65 WARNING |
3.5 Ton 14 SEER Goodman Heat Pump | |
SKU | GSZ140421 |
Weight (in lbs) | 275.000000 |
Brand/Manufacturer | Goodman |
Cooling BTU | 41,000 |
Heating BTU | 42,000 |
Decibel Level (dBA) | 74 |
Energy Star | Yes |
Refrigerant | R410A |
SEER1 (Efficiency) | 14 |
Condenser Stages | Single Stage |
Compressor Type | Scroll |
Liquid Valve Size | 3/8" |
Suction Valve Size | 7/8" |
Electrical | 208 / 230 V. 1 Phase 60 Hz |
Max Breaker Size | 40 amps |
Min. Breaker Size | 24 amps |
Tonnage | 3.5 Ton |
Valve Type | Sweat |
Height | 38.25" |
Width | 35.5" |
Depth | 35.5" |
Warranty | 10 Years with Online Registration |
Resources | You will need Adobe® Acrobat® Reader to view PDF documents. |
Safety Information | PROPOSITION 65 WARNING |
3.5 Ton ACiQ Hybrid Upgrade | |
SKU | ACIQ-4X-EHPB-UPG |
Weight (in lbs) | 120.000000 |
Brand/Manufacturer | ACiQ |
Refrigerant | R410A |
Safety Information | PROPOSITION 65 WARNING |
30 Feet of 3/8" LL x 7/8" SL x 3/8" Insulated Line Set | |
SKU | LS38783830 |
Weight (in lbs) | 30.000000 |
Brand/Manufacturer | Online Supply |
Liquid Line | 3/8" |
Suction Line | 7/8" |
Suction Line Insulation Thickness | 3/8" |
Length | 30 feet |
Safety Information | PROPOSITION 65 WARNING |
4 to 5 Ton 21" Width Goodman Vertical Evaporator Cased Coil | |
SKU | CAPF4860C6 |
Weight (in lbs) | 41.000000 |
Brand/Manufacturer | Goodman |
Configuration | Upflow / Downflow |
Refrigerant | R410A or R22 |
Liquid Line | 3/8" |
Suction Line | 7/8" |
Tonnage | 5 Ton |
Style | A-Coil |
Height | 30" |
Width | 21" |
Depth | 21" |
Warranty | 10 Years with Online Registration |
Resources | You will need Adobe® Acrobat® Reader to view PDF documents. |
Safety Information | PROPOSITION 65 WARNING |
50 Feet of 3/8" LL x 1 1/8" SL x 3/8" Insulated Line Set | |
SKU | LS381183850 |
Weight (in lbs) | 48.000000 |
Brand/Manufacturer | Online Supply |
Liquid Line | 3/8" |
Suction Line | 1 1/8" |
Suction Line Insulation Thickness | 1/2" |
Length | 50 feet |
Safety Information | PROPOSITION 65 WARNING |
No Thank You | |
SKU | NOTHANKYOU |
Weight (in lbs) | 120.000000 |