3 Ton 18 SEER Goodman Air Conditioner Split System - Upflow/Downflow

The Goodman® brand DSXC 18 SEER Central Air Conditioner uses the environmentally friendly refrigerant R-410A and features energy efficiencies and operating sound levels that are among the best in the heating and air conditioning industry. R-410A is chlorine-free to help prevent damage to the ozone layer. The DSXC features the two-stage, high-efficiency Copeland® UltraTech scroll compressor, which provides improved temperature and humidity control.  This unit is designed for the consumer who desires superior comfort, quiet operation, and environmentally friendly air conditioning performance.

In order to achieve the 16 SEER efficiency this central air conditioner must be installed with the manufacturer recommended evaporator coil, a Goodman variable speed furnace, variable speed air handler, or variable speed modular blower and thermostatic expansion valve (TXV). A 16 SEER system will reduce your electric bill approximately 7% - 8% more than a 15 SEER system.

Please note that this air conditioning equipment comes pre-charged with R-410A liquid refrigerant and by Federal law cannot be released to the atmosphere. Yes you can purchase this equipment without being EPA certified. If you are mechanically inclined you may perform about 90% of the equipment installation yourself. However we strongly recommend that a professional heating / cooling contractor do the final part of the installation, including the managing of refrigerant. An HVAC contractor has the tools and know-how to do this work.

Standard Features of this Central Air Conditioner

• Two-Stage Copeland® UltraTech scroll compressor
• R-410A environmentally friendly refrigerant 
• Copeland® ComfortAlert diagnostics
• ComfortNet™ Communications System compatible
• Two-Speed condenser fan motor
• High-quality foam compressor sound blanket
• Loss of charge switch
• High-pressure switch
• Factory-installed filter dryer
• Copper tubing / enhanced aluminum fin coil
• Sweat connection service valves with easy access to gauge ports
• ARI Certified; ETL Listed

Cabinet Features

• Wire fan discharge grille
• Steel louver coil guard
• Baked-on powder paint finish
• Rust-resistant coated screws
• Compact footprint
• Top and side maintenance access
• Single-panel access to controls with space provided for field-installed accessories
• When central air conditioner is properly anchored, meets the 2001 Florida Building Code unit integrity requirements for hurricane-type winds

The Goodman® brand MBVC modular blowers are tailor-made for exceptional energy efficiency. Now fully compatible with the ComfortNet line of communicating equipment, these two-piece blowers increase both installation and application flexibility. Units can be matched with cased coils for upflow, downflow, and horizontal applications.

Standard Features

• MBR is a multi-speed blower — motor speed is easily changed
• MBVC has a variable-speed ECM™ blower motor
• MBVC is compatible with the ComfortNet Communicating System family of products
• Cooling or heat pump applications: upflow, downflow, and horizontal applications
• MBR control board includes a fan delay in the cooling mode and is isolated from the air stream
• CAPF/CHPF coils are equipped with a check flowrater
• ARI Certified
• ETL Certified

Cabinet Features

• Cabinet constructed from formed, painted galvanized steel
• Cabinet blower section can be used as an electric furnace
• Cabinets intended to be used with cased evaporator coil (CAPF/CHPF) and condensing unit or heat pump
• Foil-faced insulation is glued in place and covers the entire blower case to reduce operating sound and cabinet condensation
• Bottom flanges formed inwardly for additional strength and to provide a good mounting surface for a cased-coil section to form a two-piece blower coil

The Goodman CHPF2430B6 Horizontal Cased Indoor Air Conditioner Evaporator Coil is made for use with split-system air conditioning and Evaporator systems. The Goodman Air Conditioning and Heating Company has become one of the largest manufacturers of residential and light commercial air conditioning, heating, and indoor air quality products and systems by focusing on just one thing, building the most reliable and refreshingly affordable indoor comfort products in the market.

• Suitable for use with R-410A and R-22 refrigerants
• Rust-resistant, thermoplastic drain pans feature a low water-retention design
• Check flowrater expansion device for heat pump or cooling-only applications
• Rifled aluminum tubing and louvered aluminum fin coils on the CAPF, CAUF, and CHPF coils
• AHRI Certified; ETL Listed
• Foil-face insulation
• Galvanized-steel, leather-grain finish
• Architectural Gray paint finish on CAPF and CHPF cased coils
• Split-seam front for easy access
• 17½”, 21”, and 24½” CHPF coils have one 3½” adapter plate