1-800-397-1392
Today's Hours 8am - 9pm est
Please note that in order to function, this air handler must be installed with a condenser, controller, and other installation equipment, also available for purchase.
The Mitsubishi SVZ-KP30NA is designed to be a high-efficiency central system. This unit can maintain its efficiency down to a much lower temperature than almost any other central system brand, saving you quite a bit of money in electric bills. Also, the SVZ-KP30NA can connect with standard ductwork, allowing you to replace existing systems with minimal adjustments. Moreover, any of Mitsubishi’s condensers that can be paired with this unit will also have a slimmer form factor to save yard space.
"Mitsubishi SVZ Series 2.5 Ton Air Handler | |
---|---|
SKU | SVZ-KP30NA |
Weight (in lbs) | 119.000000 |
Brand/Manufacturer | Mitsubishi |
Controller | Not Included |
Additional Information | Drain: 3/4" |
HSPF | 13.6 |
Cooling BTU | 27,000 BTU |
Heating BTU | 29,400 BTU |
Maximum CFM | 613-875 CFM |
Decibel Level (dBA) | 32-40 |
Refrigerant | R410A |
Capacity | Dehumidification Rate: 0.3 gal/hr |
SEER1 (Efficiency) | 18-20 |
EER | 12.5 |
Condenser Stages | Variable Speed |
Compressor Type | Rotary |
Liquid Line | 3/8" |
Suction Line | 5/8" |
Electrical | 208/230V 1 Phase 60 Hz |
Phase | Single Phase |
Tonnage | 2.5 Ton |
BTU/Tonnage | 30,000 BTU/2.5 Ton |
Zone Compatibility | Multi Zone |
Operating Mode | Cooling, Heating |
Height | 43-3/4" |
Width | 21" |
Depth | 21-5/8" |
Warranty | 10 Years with Online Registration |
Resources | You will need Adobe® Acrobat® Reader to view PDF documents. |
Safety Information | PROPOSITION 65 WARNING |