Osburn Stratford II Wood Burning Fireplace with Blower - OB04007 - Heats 2200 Sq Ft
By
Osburn
In stock
Model
OB04007
ID
16252
Was $4,099.00 Your Low Price Special Price $3,999.00
Free Shipping
Use Code:
break250
Save $250 OFF orders over $1899
- days
- Hours
- Minutes
- Seconds
Get stove level heating with a beautiful wood burning fireplace
- Heat Capacity: 2200 square feet
- Framing Dimensions: 37 3/4"W x 41 5/8"H x 24 7/8"D
- Maximum Burn Time: 9 Hours
- Maximum Output BTU/Hour: 80,000
- Warranty: Limited Lifetime
The Osburn Stratford fireplace is an extremely well built in fireplace that is much more affordable than other fireplaces in its size range. This amazing fireplace is capable of heating 2200 square feet burning for up to 9 hours. This impressive fireplace has a 2.5 cubic foot box which can hold 20-inch logs.
This unit can be installed into a wood framed cavity in new construction or when removing an existing inefficient open zero-clearance/factory built fireplace.
Additional Information
- Maximum Efficiency: 74%
- Certification: EPA, UL 127
- Firebox Volume: 2.5 Cubic Feet
- Max Firewood Length: 20" (Left To Right)
- Emissions Grams/Hour: 1.14
- Ceramic Glass Size: 22 1/4" X 12 1/2"
| Osburn Stratford II Wood Burning Fireplace with Blower - OB04007 - Heats 2200 Sq Ft | |
|---|---|
| SKU | OB04007 |
| Weight (in lbs) | 484.000000 |
| Brand/Manufacturer | Osburn |
| Included Items | Heat activated, variable speed blower kit |
| Heating BTU | 75,000 BTU |
| Approximate Heating Area | 750-2200 Square Feet |
| Maximum CFM | 176 (Included Blowers) |
| Flue Location | Top |
| Flue Outlet | 6" Diameter Class A Chimney Required |
| Efficiency | Up To 74% |
| Amperage Requirement | Less Than 5 Amps (Included Blower) |
| Material | Steel |
| Type | Built-In Fireplace |
| Ignition Type | Match Light |
| Fuel Type | Wood |
| Certification | EPA, UL127 |
| Size Range | 30" - 39" Wide |
| Area Heated | 2000 - 2499 Sq. Ft |
| Fireplace Style | Traditional |
| Framing Dimensions | 36 3/4''W X 40 5/8''H X 23 7/8''D (See Manual) |
| Max Log Length | 20" |
| Dimensions | 37 7/8''W X 47 1/8''H X 29 5/8''D |
| Warranty | Limited Lifetime |
| Resources | You will need Adobe Acrobat Reader to view PDF documents |
| Safety Information | PROPOSITION 65 WARNING
This product and many products on our site may contain a chemical know to the state of California to cause cancer or birth defects or other reproductive harm. For more information about Proposition 65 please Click Here.
|
Write Your Own Review
Customer Questions
Why can you only burn for 9 hours?
It is not that you can't burn for longer than 9 hours, it is how long one load can last up to given ideal conditions. Please follow all guidelines in the manual provided.
If you have any further questions, please call us and we will be happy to assist you.
Does this have a catalyst?
No, this is a non-catalytic fireplace. If you have any further questions please feel free to give us a call! Thanks.
Can this be installed in a wood-framed wall?
Yes, this unit can be installed into a wood framed cavity. If you have any further questions please feel free to give us a call! Thanks.
Can this be installed in a brick fireplace without the other flute attachment?
Provided that your existing venting is compatible and in good condition, no additional venting is required for this fireplace. However, if your venting is not compatible as indicated in the owner's manual, new venting may be required. If you have any further questions please feel free to give us a call! Thanks.
is there a “bar” that runs down the center face for the door to close on or is it completely open?
Besides the set of two doors on the front, the face of the fireplace is open. If you have any further questions please feel free to give us a call! Thanks.
What is the actual size/measurement width, and height of each glass door?
Each panel of the glass in the doors are 11 1/8" wide and 12 1/2" tall. If you have any further questions please feel free to give us a call! Thanks.
Are you able to burn with the doors open to enjoy the open fire and then close for the night when going to bed?
Hello, per the manual on page seven "this fireplace has been tested for use with an open door in conjunction with a fire screen, sold separately. The door may be opened, or fire screen removed only during lighting procedures or reloading. Always close the door or put back on the fire screen after ignition. Do not leave the fireplace unattended when the door is opened with or without a fire screen." If you have any further questions please feel free to give us a call! Thank you.
Is it possible to open the fresh air intake manually in the event of a power outage?
This unit's blower can be operated in two modes: Auto or Manual. Please see pg. 18 of the installation manual. If you have any further questions or need further assistance, please feel free to reach out to one of our experienced customer service representatives and they would be happy to assist you. Thank you and have a wonderful day. Installation Manual
How long does the blower last after the fire is out?
The blower will remain on until the fireplace is cool which is typically 10-30 minutes.
If you have any further questions, please feel free to give us a call! Thanks.
I need to purchase the wood handles for the doors on a Osborn Stratford II
Please fill out the parts request form on the bottom of the page.
If you have any further questions, please feel free to give us a call! Thanks.
Does the Osburn Stratford use a grate to burn wood on?
The Osburn Stratford is a high efficiency fireplace that is intended to burn without a log grate. Please give us a call if we can help further. Thanks!
Where can a zero clearance wood burning fireplace be installed?
A zero clearance wood burning fireplace is designed for installation in new construction or remodeling projects where a traditional masonry fireplace isn't practical. These units are commonly installed in framed walls with adequate spacing, making them a versatile option for adding real wood heat to a variety of home layouts.
Is a wood burning zero clearance fireplace more affordable than a masonry fireplace?
Yes, wood burning zero clearance fireplaces are generally more cost-effective than traditional masonry fireplaces. These factory-built units require less labor and materials, and they’re easier to install, especially in new construction or remodeling projects. Masonry fireplaces, on the other hand, involve custom brick or stone work and a full chimney structure, which significantly increases overall cost.
Do I need a masonry chimney for a zero clearance fireplace?
No, you do not need a masonry chimney for a zero clearance fireplace. These fireplaces are designed to be used with a Class A insulated or air-colled chimney system, which safely vents high-temperature exhaust through the roof. This makes zero clearance fireplaces a flexible and cost-effective alternative to traditional masonry fireplaces that require heavy, labor-intensive chimney construction.
Do I need an outside air kit for a zero clearance wood fireplace?
Yes, most zero clearance wood fireplaces require an outside air kit, especially in modern tightly sealed homes. An outside air kit supplies combustion air directly from outside, improving performance, preventing backdrafts, and helping the fireplace operate safely and efficiently. Always check the manufacturer’s requirements, as many zero clearance models will not function properly without one.
Did you find what you were looking for?
Accessories
Got everything you needed to install? See the recommended and/or required options for installation below.
Check the items you would like to include with your order