1.5 Ton 13.4 SEER2 R32 Air Conditioner Split System - Multi-Positional

OVERVIEW

The ACiQ AQ-GLXS3BN1810 is a durable, high-quality condenser unit that is the perfect cooling solution for homes up to 1100 square feet in northern states. At a capacity of 1.5 tons and a SEER2 rating of 13.4, this cooling-only condenser won't break the bank while still reliably cooling your home for years to come. Easy to access service valves make installation by a licensed HVAC professional a breeze. Pay for high-end performance without the high-end price tag when you choose ACiQ.

QUICK FACTS

• 13.4 SEER2, 1.5 tons AC-only Condenser: With a 13.4 SEER2 efficiency rating and a tonnage of 1.5, this AC condenser is a great choice for smaller homes that experience shorter, milder summers.
• Single Stage: When properly sized and installed, a single stage condenser is a cost-effective and durable option to cool your home.
• R32 Refrigerant: With R32 refrigerant, this unit complies with Clean Air Act refrigerant requirements.
• Fully Charged for Up to 15' of Line Set: The condenser comes fully pre-charged with enough refrigerant for up to 15 feet of line set.

Durability and Reliability

The AQ-GLXS3BN1810 is designed to last with features like a baked-on powder-paint finish that is approved for up to 500 hours of salt-spray. The factory-installed filter dryer also lowers general wear-and-tear on the unit while the enhanced copper tube prevents coil degradation, ensuring lasting and reliable comfort in your home.

Warranty

If the AQ-GLXS3BN1810 condenser fails, the unit comes with the manufacturer's standard 10-year parts warranty as long as it is installed following state and local codes and registered online. Backed by the same trusted manufacturing partners behind major HVAC brands, the ACiQ warranty further guarantees the high-quality performance expected from any other major brand.

Disclaimer

• Due to Department of Energy efficiency requirements, this unit cannot be installed in the following states: Alabama, Arizona, Arkansas, California, Delaware, Florida, Georgia, Kentucky, Louisiana, Maryland, Mississippi, Nevada, New Mexico, North Carolina, Oklahoma, South Carolina, Tennessee, Texas, and Virginia.
• For this unit to function, an indoor air handler or coil is required.
• This condenser contains R32 refrigerant, classified as an A2L refrigerant, and requires a refrigerant leakage detection system to be installed. To comply with safety standards, this unit must be paired with an R32 air handler or evaporator coil already equipped with a leakage detection system. Failure to comply with these requirements may result in safety hazards and could void the warranty. Please call us at 1-888-307-5604 if you have any questions.

The Goodman HKTSD Series Heat Strip have rust resistant nickel chromium heat elements. Completely assembled and tested including a plug in wiring harness for ease of installation in Air Handlers. The Goodman HKTSD Series Heat Strips offer sequencers for better temperature control. Goodman has become one of the largest manufacturers of residential and light commercial air conditioning, heating, and indoor air quality products and systems by focusing on just one thing, building the most reliable and refreshingly affordable indoor comfort products in the market.

Compatible With

• Goodman AMST R32 Air Handlers
• Goodman AMVT R32 Air Handlers
• Goodman AMVE R32 Air Handlers

E Liteis a plastic pad designed as a mounting base for air conditioning condensers. The rugged design provides uniform and generous ribbing for optimum, self-leveling ground support without inserts. E Lite is injection molded from polypropylene, resulting in a pad that is lightweight, but not too light. A subtle texture prevents unit slide and presents a classic appearance, which is enhanced by rounded edges and a concrete gray color. Each pad is molded with its size in raised letters.

• High recycled plastic content
• Subtle texture resists unit slide
• Unaffected by UV or weather
• Uniform ribbing transfers load evenly
• Drillable for securing unit
• Lightweight, yet rugged

No Return Policy

All sales of this product are final and are non-refundable.

The ACiQ STN701 Single-Stage Dual Powered Non-Programmable Thermostat is a cost effective solution to temperature control! Designed with a bright blue backlight and large easy to read characters, ACiQ thermostats are easy to operate for all consumers.

• 1 Heat / 1 Cool Non-Programmable Thermostat
• Operable with AAA batteries or 24v power
• Large, easy to ready clear LCD display with different backlight color options
• Configurable with Electric or Gas Systems
• Separate B & O terminals
• Handles heating and cooling temperature swing adjustments separately
• Toggleable 5 minute compressor delay protection
• Temperature Range: 32°F-99°F (1°C-40°C)
• Temperature Accuracy: ±1.8°F (±1°C)

The STN855W is a versatile WiFi thermostat offering 7-day, 5/1/1 programmable, or non-programmable options. It features a temperature range of 32°F-99°F (1°C-40°C) and precise control from 44°F-90°F (7°C-32°C) with an accuracy of ±1°C. Powered by 24V, it comes in a compact design with dimensions of 120 x 98 x 28 mm, making it ideal for efficient and customizable temperature management.

• 7-Day or 5/1/1 programmable scheduling
• 2 Heat / 2 Cool Conventional or 3 Heat / 2 Cool Heat Pump thermostat
• Temperature range: 32°F-99°F (1°C-40°C)
• Control temperature range: 44°F-90°F (7°C-32°C)
• Accurate temperature measurement: ±1°C (at 20°C)
• Easy menu-driven programming
• White, blue, or green backlight settings
• Configurable with electric or gas setups
• Keypad lockout
• Heating and cooling setpoint limits
• Filter change indicator (can be toggled on/off)
• Works with Alexa
• 24v power
• Compact design (120 x 98 x 28 mm)

This 240 volt heater coil can be added to a Goodman air handler to provide winter-time heating capabilities.

Produces 51,150 BTUs of heat.

Controlled by sequencers for optimum temperature balance. Completely assembled and tested. Built-in overcurrent protection on all units as indicated in electrical data chart (see spec sheet). Multiple branch circuit capability. High temperature limit controls for safe operation. Plug-in wiring harness for easy installation into air handlers. Rust-resistant nickel chromium heat elements.

If you are installing a heater coil in an air handler, line voltage is to be connected directly to the heater coil which will operate both the heater coil and air handler. A separate circuit for the air handler is not needed. 

Depending on the heater coil size being installed, one or two circuits to the heater coil will be necessary (see "PRODUCT SPECIFICATIONS" below for quantity and amperage of circuits required for this heater coil.) At your home's circuit panel, individual 220 volt double-pole circuit breakers are required for each circuit.

Compatible With

• Goodman ARPT Air Handlers - 30,000+ BTU
• Goodman ARUF Air Handlers - 30,000+ BTU
• Goodman ASPT Air Handlers - 36,000+ BTU
• Goodman ASUF Air Handlers - 42,000+ BTU
• Goodman AVPTC Air Handlers - 36,000+ BTU

Ensure smooth refrigerant flow and HVAC system efficiency with this no-tear 50-foot insulated line set. Designed for seamless connection between an outdoor condensing unit and an indoor air handler or evaporator coil, this line set offers durability, flexibility, and superior thermal insulation for high-performance HVAC applications.

Features:

• 3/8" liquid line (LL) and 3/4" suction line (SL) for optimal refrigerant transfer.
• Extra thick 1/2" insulation to prevent tears during installation and from age.
• 50' long line set - Ideal for HVAC setups requiring a longer line set run.
• Flexible and durable copper tubing allows for smooth routing and secure connections.

Durable, No-Tear Line Sets Built for Tough Installations

No-tear line sets are designed to eliminate one of the most common frustrations during HVAC installations—insulation that rips, tears, or breaks down over time. Built with enhanced durability and UV-resistant insulation, these line sets maintain their integrity during handling, installation, and long-term outdoor exposure. The result is a cleaner install, better protection, and fewer callbacks compared to standard line sets.

Key Benefits

• No-Tear Insulation Construction – Resists ripping and damage during installation
• Enhanced Durability – Holds up to jobsite handling and long-term use
• UV-Resistant Jacket – Protects against sun exposure and outdoor degradation
• Cleaner Installation Finish – Maintains a professional look without patching or tape
• Long-Term Insulation Performance – Helps prevent breakdown over time
• Contractor-Friendly Design – Easier to work with compared to standard line sets

Built to Withstand Real Jobsite Conditions

Traditional line sets often use insulation that can tear easily when pulled through walls, around corners, or across rough surfaces. No-tear line sets are engineered with a reinforced outer jacket that resists damage during installation, helping maintain insulation integrity from start to finish. This added durability not only improves installation efficiency but also reduces the need for repairs, tape, or replacement sections—saving time on the job and delivering a more professional final result.

UV Protection for Long-Term Outdoor Performance

Standard insulation can degrade when exposed to sunlight, leading to cracking, peeling, and reduced performance over time. No-tear line sets feature a UV-resistant outer layer designed to withstand prolonged outdoor exposure, helping preserve insulation quality and system efficiency. This makes them an ideal choice for installations where line sets are exposed along exterior walls or rooftops.

Ensure smooth refrigerant flow and HVAC system efficiency with this no-tear 50-foot insulated line set. Designed for seamless connection between an outdoor condensing unit and an indoor air handler or evaporator coil, this line set offers durability, flexibility, and superior thermal insulation for high-performance HVAC applications.

Features:

• 3/8" liquid line (LL) and 3/4" suction line (SL) for optimal refrigerant transfer.
• Extra thick 1/2" insulation to prevent tears during installation and from age.
• 50' long line set - Ideal for HVAC setups requiring a longer line set run.
• Flexible and durable copper tubing allows for smooth routing and secure connections.

Durable, No-Tear Line Sets Built for Tough Installations

No-tear line sets are designed to eliminate one of the most common frustrations during HVAC installations-insulation that rips, tears, or breaks down over time. Built with enhanced durability and UV-resistant insulation, these line sets maintain their integrity during handling, installation, and long-term outdoor exposure. The result is a cleaner install, better protection, and fewer callbacks compared to standard line sets.

Key Benefits

• No-Tear Insulation Construction - Resists ripping and damage during installation
• Enhanced Durability - Holds up to jobsite handling and long-term use
• UV-Resistant Jacket - Protects against sun exposure and outdoor degradation
• Cleaner Installation Finish - Maintains a professional look without patching or tape
• Long-Term Insulation Performance - Helps prevent breakdown over time
• Contractor-Friendly Design - Easier to work with compared to standard line sets

Built to Withstand Real Jobsite Conditions

Traditional line sets often use insulation that can tear easily when pulled through walls, around corners, or across rough surfaces. No-tear line sets are engineered with a reinforced outer jacket that resists damage during installation, helping maintain insulation integrity from start to finish. This added durability not only improves installation efficiency but also reduces the need for repairs, tape, or replacement sections-saving time on the job and delivering a more professional final result.

UV Protection for Long-Term Outdoor Performance

Standard insulation can degrade when exposed to sunlight, leading to cracking, peeling, and reduced performance over time. No-tear line sets feature a UV-resistant outer layer designed to withstand prolonged outdoor exposure, helping preserve insulation quality and system efficiency. This makes them an ideal choice for installations where line sets are exposed along exterior walls or rooftops.