We use cookies to make your experience better.To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies.Learn more.
This option upgrades the condenser to a more efficient, ACiQ condenser that utilizes inverter technology. This allows you to reduce energy bills by up to 50% in the summer! Along with that savings, you also have electric backup heat to your gas furnace.
If you currently use a propane furnace, you would be crazy not to switch to this condenser. This upgraded condenser will allow you to heat off of electricity down to roughly 0 degrees Fahrenheit, saving you even more money over expensive propane gas.
This upgrade typically pays for itself within a year due to the increased efficiency over the standard air conditioners.
High-Efficiency Whole-Home Heating & Cooling That Helps Lower Energy Costs
Upgrade your home comfort with a Goodman heating and cooling system built for efficient year-round performance. This matched system combines central air conditioning with a 96% AFUE gas furnace to help reduce fuel waste while keeping your home comfortable through every season.
Key Benefits
Complete Heating and Cooling System – Includes a matched Goodman air conditioner, evaporator coil, and gas furnace for dependable year-round comfort.
Sized for Smaller Homes – The 1.5 ton cooling system is generally suitable for homes around 600-1,000 sq. ft., depending on climate and home design.
Efficient Gas Heating – The 40,000 BTU furnace delivers 96% AFUE efficiency to reduce fuel waste while keeping your home warm.
Reliable Indoor Comfort – The gas furnace uses a multi-speed ECM blower to support dependable airflow and consistent whole-home comfort.
Energy-Conscious Cooling – Up to 14.3 SEER2 cooling performance helps lower energy consumption when properly matched and installed.
AHRI-Rated Matched Performance – Certified matched system performance helps deliver verified heating and cooling efficiency.
Cooling & Heating Capacity for Your Home
This system includes 1.5 ton of cooling capacity for homes around 600-1,000 square feet. The included 40,000 BTU gas furnace provides heating support, and final sizing should be confirmed by a professional based on climate, insulation, windows, ceiling height, air leakage, and home layout.
Efficient Comfort Throughout the Seasons
The air conditioner delivers up to 14.3 SEER2 efficiency when installed as a part of this system, helping balance dependable cooling with everyday operating costs. The gas furnace provides 96% AFUE efficiency, meaning more of the fuel you purchase is converted into usable heat for your home.
Built for Reliable System Performance
This matched Goodman system brings together heating and cooling components selected to work together for dependable year-round comfort. The furnace features single-stage heating and a multi-speed ECM blower for improved comfort, while the outdoor condenser uses R32 refrigerant and includes a factory-installed filter drier to help protect the refrigeration system from moisture and contaminants.
Why Goodman: Air Conditioners and Furnaces
Goodman heating and cooling equipment is built around practical performance, dependable comfort, and strong overall value for homeowners.
With a wide range of air conditioners, furnaces, and complete system options available, Goodman makes it easier to find a solution that fits the home’s comfort needs, installation requirements, and budget.
Backed by a reputation for reliable operation and accessible replacement options, Goodman systems offer a straightforward choice for upgrading or replacing essential home comfort equipment.
Warranty
When installed according to applicable codes and registered online with Goodman, this system includes:
10-Year Parts Limited Warranty on included Goodman equipment
Lifetime Limited Heat Exchanger Warranty
Warranty coverage requires proper installation and online registration. Installation by a qualified HVAC professional is recommended to maintain warranty eligibility.
What’s Included
Goodman Air Conditioner Condenser – 1.5 ton outdoor air conditioning unit.
Goodman Evaporator Coil – Factory-matched evaporator coil for the included system.
Goodman Gas Furnace – 40,000 BTU, 96% AFUE single-stage gas furnace with multi-speed ECM blower.
Recommended Accessories
Line Set Options – Select the appropriate line set length and configuration shown on the product page for your installation.
Condenser Installation Kit – Common installation materials for connecting the outdoor unit.
Thermostat Options – Choose from compatible non-programmable, programmable, or smart thermostat options based on your control preferences.
Mounting Equipment – Choose from available condenser mounting options, such as an equipment pad or wall mounting bracket, based on the installation location.
Filter Rack – Supports proper return air filtration.
Return Air Package – Return air components for furnace installation.
Supply Plenum – Connects the furnace to the home's ductwork.
LP Conversion Kit – Optional for propane applications where appropriate.
Requirements & Considerations
Installation Orientation – Designed for horizontal installation.
Fuel Type – Ships configured for natural gas and can be field converted to propane with an optional LP conversion kit when compatible.
Line Set Selection – Use the line set option and connection sizing shown on the live product page or confirmed by Goodman installation guidance.
Professional Installation Recommended – Proper installation by a certified HVAC installer is important for safe operation and warranty coverage.
California NOx Compliance Notice
Please note that this furnace does not comply with California Low NOx or Ultra-Low NOx regulations. If you have any questions, please contact us.
ACiQ Non-Programmable 1H/1C Large Display Thermostat
The ACiQ STN701 Single-Stage Dual Powered Non-Programmable Thermostat is a cost effective solution to temperature control! Designed with a bright blue backlight and large easy to read characters, ACiQ thermostats are easy to operate for all consumers.
1 Heat / 1 Cool Non-Programmable Thermostat
Operable with AAA batteries or 24v power
Large, easy to ready clear LCD display with different backlight color options
Configurable with Electric or Gas Systems
Separate B & O terminals
Handles heating and cooling temperature swing adjustments separately
Toggleable 5 minute compressor delay protection
Temperature Range: 32°F-99°F (1°C-40°C)
Temperature Accuracy: ±1.8°F (±1°C)
Santa Fe Ultra70 Whole-Home Ventilating Dehumidifier, 70-pint | R454B
OVERVIEW
The Santa Fe Ultra70 was the first compact whole house ventilating dehumidifier built for tight, low-clearance installs. It removes up to 70 pints of moisture per day and covers homes up to 1,800 square feet, which makes it a strong match for smaller houses, condos, and apartments.
Ducted into your HVAC system, the Ultra70 controls humidity everywhere at once instead of one room at a time. That means no musty basement smell, no clammy upstairs bedrooms, and no conditions that let mold and wood rot get started.
The cabinet measures 12" W x 12" H x 28" L and converts between horizontal and vertical airflow discharge, so it works in mechanical rooms, closets, attics, basements, and crawl spaces alike. Now running R454B refrigerant, it exceeds Department of Energy efficiency standards and is built at Santa Fe's headquarters in Madison, Wisconsin.
Key Features:
70 Pints Per Day – Whole-home moisture control for spaces up to 1,800 sq. ft.
Optional Fresh Air Ventilation – Duct outdoor air in to dilute indoor pollutants
MERV-13 Filtration – Standard filter captures fine airborne particles
Convertible Discharge – Rotate the panel for horizontal or vertical airflow
Compact 12" x 12" x 28" Cabinet – Fits where standard units can't
R454B Refrigerant – Exceeds DOE efficiency standards
115V / 5.4 Amps – Plugs into a standard grounded outlet
Made in Madison, Wisconsin – Heavy-duty steel construction
Customized Installation and Operation
The Ultra70 gives you three ways to install it. Tie it into your existing HVAC system with a dedicated 8" return and a supply connection with backdraft damper. Run it on its own separate ductwork. Or set it freestanding in a basement or crawl space when ducting isn't practical.
Both the return air inlet and supply air outlet use 8" duct collars. The back panel comes configured for horizontal flow through and rotates for vertical flow through with a T20 torx bit, which is what lets the same unit work in an attic, a closet, or under a floor.
Fresh air ventilation is optional and simple to add. A "T" into the inlet duct brings outdoor air into the system to dilute pollutants and maintain normal oxygen levels indoors, and the volume is adjustable with a range of dampers and controls.
HVAC Integration – Dedicated return plus ducted supply to the air handler
Dedicated Ducting – Runs on its own duct system independent of HVAC
Freestanding Operation – Works standalone in basements and crawl spaces
Optional Outdoor Air – Ventilation duct T's into the inlet, regulated by dampers and controls
Continuous Drain – Gravity drainage, no manual emptying
Warranty Information
Santa Fe warrants the Ultra70 Dehumidifier to be free from defects in materials and workmanship. The unit includes a 5-year limited warranty, with extended coverage on select components. Warranty coverage may vary based on installation, application, and registration requirements. Refer to the manufacturer’s documentation for complete warranty details.
Premium Materials & Construction
Dehumidifiers live in the roughest parts of a house. The Ultra70 is built from heavy-duty steel with components chosen to hold up to damp air, dust, and temperature swings over years of runtime.
Inside, a high-efficiency refrigeration coil, compressor, and fan work together to pull more moisture using about 15% less energy than comparably sized units. The R454B refrigerant charge lowers the environmental impact compared to earlier models while keeping performance where it needs to be.
The MERV-13 filter comes standard and pulls fine particles out of the airstream as the unit works. Vacuum it regularly and swap it every six months. The unit operates between 49°F and 95°F, plugs into a standard 115V grounded outlet at 5.4 amps, and ships with a 9 ft. cord.
Why Choose the Santa Fe Ultra70 Whole House Dehumidifier?
Whole-Home Moisture Control
Removes up to 70 pints per day across homes up to 1,800 square feet.
Ducted operation treats every room instead of chasing humidity one space at a time.
Fits Where Others Won't
Compact 12" x 12" x 28" cabinet handles low-clearance installs.
Convertible horizontal or vertical discharge solves tricky duct layouts.
Ventilation and Filtration Built In
Optional fresh outdoor air ducting dilutes indoor pollutants.
Standard MERV-13 filter captures fine airborne particles.
Efficiency You Can Measure
Exceeds Department of Energy standards with R454B refrigerant.
High-efficiency coil, compressor, and fan use roughly 15% less energy than similar units.
Built to Last
Heavy-duty steel construction, assembled in Madison, Wisconsin.
Continuous drainage and minimal maintenance for set-and-forget operation.
Wall Mount Bracket for Condensers 48"
This wall mount bracket is perfect for outdoor condensers. The length of the the wall bracket arms are 48" long. The condensing unit is mounted onto the L-shaped brackets and fastened using bolts and anti-vibration washers (not included with brackets).
Features:
Steel: 10 GA
Powder-coated grey Finish
Load rating: 600 lbs per pair
Holes will accommodate anchors for installation
Warranty: 1 year
ACB line of wall brackets are approved by the Florida Building Commission and are High Velocity Hurricane Zone (HVHZ) approved. (See product certification documentation for complete details.)
No Return Policy
All sales of this product are final and are non-refundable.
Installation Kit for Condensers
Ensure a professional and secure installation for your condenser with this comprehensive installation kit. Designed to provide all the essential components needed for a smooth setup, this kit helps protect your system while ensuring proper electrical and refrigerant connections.
What’s Included:
3/4" x 6' Electrical Whip – SKU: 84138
60A Non-Fused Disconnect – SKU: 83335
Surge Protector – SKU: ICM517
CPS Charging Adapter – SKU: 87-AD87
Telescoping Wall Sleeve – SKU: NFP-75
Equip your condenser with everything needed for a safe, durable, and professional installation. Order your Condenser Installation Kit today!
Propane (LP) Conversion Kit for Goodman GR9S96, GD9S96, and GR9S92 FurnacesThis propane (LP) conversion kit is for Goodman's GR9S96, GD9S96, and GR9S92 furnace series.
Cased Coil Fit for Compatible Condensers and Furnaces
This Goodman cased evaporator coil is designed to work with compatible R32 condensers and furnaces. With a 1.5 to 2 ton capacity, 26" cabinet width, horizontal installation, and Goodman’s AlumaFin7™ coil design, it helps support proper equipment matching for approved split HVAC applications.
Key Benefits
Indoor Coil for Split HVAC Setups – Works with compatible condensers and furnaces to support system performance.
1.5 to 2 Ton Capacity – Designed for approved equipment matches where the coil capacity is equal to or greater than the condenser capacity.
26" Cabinet Width – Helps ensure the coil fits properly with compatible furnace cabinets and installation spaces.
Horizontal Installation – Supports installation flexibility for compatible horizontal applications.
Goodman AlumaFin7™ Coil Design – Features an all-aluminum coil design with grooved aluminum tubing to help increase surface area for efficient heat transfer performance.
Factory-Installed TXV – Includes a thermostatic expansion valve to help regulate refrigerant flow.
R32 Compatible – Designed for use with compatible R32 refrigerant equipment.
Sized for Approved HVAC Applications
Proper coil matching is important for system performance, fit, and installation. This coil’s 1.5 to 2 ton capacity helps match it to compatible condenser applications, while the 26" cabinet width helps determine whether it will fit correctly with the furnace and available installation space.
Built with Goodman AlumaFin7™ Coil Design
Goodman’s AlumaFin7™ coil design features all-aluminum construction and grooved aluminum tubing to help increase surface area for heat transfer. This design supports efficient system operation while providing a durable indoor coil option for compatible R32 equipment.
How the Indoor Coil Supports Your System
The indoor coil is part of the refrigerant circuit and helps transfer heat as air moves across the coil. In a properly matched system, it works with the condenser, furnace blower, and refrigerant flow controls to support reliable home comfort.
Goodman AlumaFin7™: Efficient Comfort in a Compact Design
Goodman's AlumaFin7™ evaporator coil is designed to help your heating and cooling system operate efficiently while providing dependable comfort throughout your home. Its all-aluminum construction supports efficient heat transfer and long-lasting performance, while the advanced coil design helps promote proper airflow and moisture removal.
At just 21 inches deep, the compact design can also make installation easier in homes where space is limited. When paired with compatible Goodman equipment, the coil helps deliver the efficient, reliable heating and cooling you expect from Goodman.
Warranty
When installed according to applicable codes and registered online with Goodman, this evaporator coil includes:
10-Year Parts Limited Warranty
Warranty coverage requires proper installation and online registration. Installation by a qualified HVAC professional is recommended to maintain warranty eligibility.
What’s Included
Goodman cased evaporator coil
Factory-installed TXV
Recommended Equipment Options
Compatible Condenser – Used with the coil as part of a compatible split HVAC setup.
Compatible Gas Furnace – Provides the indoor airflow needed to move air across the coil in compatible applications.
Requirements & Considerations
Compatible Condenser Match – This coil must be paired with compatible outdoor equipment designed for the correct refrigerant type and approved equipment match.
Coil Tonnage – Coil capacity should be equal to or greater than the condenser capacity. Do not pair a coil with a condenser that exceeds the coil’s rated capacity.
Furnace Cabinet Width – Confirm the 26" coil cabinet width is compatible with the furnace and available installation space.
Replacement Planning – When replacing a coil, review whether the condenser, furnace, or overall equipment setup should also be updated.
Refrigerant Compatibility – Use with compatible R32 equipment and installation requirements.
Installation Orientation – Confirm the horizontal coil orientation matches the installation application before purchase.
Professional Installation Recommended – Proper installation by a certified HVAC installer is important for safe operation and warranty coverage.
R32 Refrigerant Compatibility Notice
Disclaimer: This evaporator coil is designed for use with R32 refrigerant systems, classified as an A2L refrigerant. R32 systems must be installed with compatible equipment and any required refrigerant leak detection components according to the product specifications, installation manual, and applicable safety standards. Failure to follow these requirements may result in safety hazards and could void the warranty. Please call us at 1-888-912-1827 if you have any questions.
ACiQ WiFi Programmable Touchscreen Thermostat
The STN855W is a versatile WiFi thermostat offering 7-day, 5/1/1 programmable, or non-programmable options. It features a temperature range of 32°F-99°F (1°C-40°C) and precise control from 44°F-90°F (7°C-32°C) with an accuracy of ±1°C. Powered by 24V, it comes in a compact design with dimensions of 120 x 98 x 28 mm, making it ideal for efficient and customizable temperature management.
The E Lite is a plastic pad designed as a mounting base for air conditioning condensers. The rugged design provides uniform and generous ribbing for optimum, self-leveling ground support without inserts. E Lite is injection molded from polypropylene, resulting in a pad that is lightweight, but not too light. A subtle texture prevents unit slide and presents a classic appearance, which is enhanced by rounded edges and a concrete gray color. Each pad is molded with its size in raised letters.
High recycled plastic content
Subtle texture resists unit slide
Unaffected by UV or weather
Uniform ribbing transfers load evenly
Drillable for securing unit
Lightweight, yet rugged
No Return Policy
All sales of this product are final and are non-refundable.
Goodman 1.5 Ton 14.3 SEER2 Central Air Conditioner Condenser - R32 Single Stage
Reliable Standard-Efficiency Cooling for Smaller Homes
Keep your home comfortable through warm weather with a Goodman central air conditioner condenser built for dependable split-system cooling. This outdoor condenser is a practical choice for homeowners replacing an existing AC component or completing a compatible cooling setup with a matching indoor coil or air handler. It balances reliable performance, durable outdoor construction, and installation-friendly service access for small homes.
Key Benefits
Sized for Small Homes – 1.5 ton cooling capacity is generally suitable for homes approximately 600–1,000 sq. ft., depending on climate, insulation, windows, ceiling height, air leakage, home layout, and a professional sizing review.
14.3 SEER2 Efficiency – 14.3 SEER2 performance provides dependable cooling at a standard efficiency level.
Cooling-Only Performance – Designed for central air conditioning applications when paired with a compatible indoor evaporator coil or air handler.
Low Outdoor Sound – Designed with sound-dampening features to support quieter outdoor operation.
Factory-Charged for Installation – Comes factory charged for up to 15' of line set to support a cleaner installation process.
Factory-Installed Filter Drier – Protects the refrigeration system by reducing moisture and contaminants.
Durable Outdoor Construction – Heavy-gauge galvanized steel cabinet with a baked-on powder-paint finish is built for long-term outdoor durability.
Cooling Capacity for Smaller Homes
With 1.5 tons of cooling capacity, this condenser is commonly used for homes approximately 600–1,000 sq. ft. in various climates. It is a cooling-only outdoor unit and must be paired with a compatible indoor evaporator coil or air handler to operate.
Actual sizing depends on your local climate, insulation, windows, ceiling height, air leakage, home layout, and a professional sizing review.
Reliable 14.3 SEER2 Efficiency
A 14.3 SEER2 efficiency rating provides dependable standard-efficiency cooling when paired with compatible indoor equipment.
Built for Reliable Outdoor Performance
Built with a galvanized-steel cabinet, baked-on painted finish, and installation-friendly service access to support dependable outdoor performance. The cabinet includes heavy-gauge galvanized steel construction with a baked-on painted finish, while easy-access gauge ports, service valves, and top/side access panels support a smoother service experience for qualified HVAC professionals.
Goodman Central AC System: How Does it Work?
Designed to deliver reliable heating and cooling performance, this system helps keep your home comfortable through changing outdoor conditions.
Durable construction and thoughtful system design support dependable operation, while efficiency-focused features help manage comfort throughout the year.
Whether replacing an older system or completing a new installation, this product offers a practical solution for whole-home comfort.
Warranty
This condenser includes a 10-Year Limited Parts Warranty with online registration. Installation must comply with state and local codes, and warranty coverage may be void if the unit is not installed by a qualified professional.
What’s Included
Goodman Central Air Conditioner Condenser – Outdoor cooling unit for a compatible split-system installation.
Factory-Installed Filter Drier – Protects the refrigeration system by reducing moisture and contaminants.
Recommended Accessories
Line Set – Connects the outdoor condenser to compatible indoor equipment for refrigerant flow; select the visible line set option that matches the installation.
Condenser Installation Kit – Provides key installation materials for a cleaner condenser setup.
Requirements & Considerations
Compatible Indoor Equipment Required – This cooling-only condenser must be paired with a compatible indoor evaporator coil or air handler.
Electrical Requirements – Requires a 208 / 230 V. 1 Phase 60 Hz electrical supply.
Line Set Selection – Use the line set option and connection sizing shown on the live product page or confirmed by Goodman installation guidance.
Professional Installation Recommended – Proper installation, system matching, and refrigerant handling are important for safe operation and warranty coverage.
R32 Refrigerant Compatibility Notice
Disclaimer: This condenser contains R32 refrigerant, classified as an A2L refrigerant, and requires a refrigerant leakage detection system to be installed. To comply with safety standards, this unit must be paired with an R32 air handler or evaporator coil already equipped with a leakage detection system. Failure to comply with these requirements may result in safety hazards and could void the warranty. Please call us at 1-888-912-1827 if you have any questions.
Goodman 96% 40,000 BTU Single Stage Gas Furnace | 17.5" Width | Downflow / Horizontal
OVERVIEW
If you're looking to reduce your energy bill and improve the comfort of your home, look no further than Goodman's GD9S960403BN . This gas furnace features efficient operation and high-quality construction to provide your home with reliable, affordable heating. The GD9S960403BN single-stage, 9-speed furnace is a great value designed for many applications.
QUICK FACTS
This furnace is ideal to heat a smaller house (depending on climate)
40,000 BTU 96% efficient natural gas furnace
Requires plastic/PVC flue venting
Complies with Clean Air Act New Refrigerant Requirements
Can be used in the downflow or horizontal orientation
Can be converted to an LP furnace with a conversion kit (sold separately)
Innovative design for electrical efficiency, safety, and lower sound output
40,000 BTU
The GD9S960403BN Goodman gas furnace is suitable in output for a small house in ideal climate conditions. At 40,000 BTU's, this furnace size is the smallest furnace that Goodman has to offer. The BTU count is the input per hour of the furnace, and the output is 38,400 BTU's (40,000 x 96% AFUE) per hour.
96% Efficiency Rating
The GD9S960403BN Goodman gas furnace has a 96% efficiency rating. This means that only 4% of the fuel going into the furnace is used up in normal furnace operations and not used to heat your home. The remaining 96% of the inputted fuel is used to heat your home. 96% efficient furnaces is one of the highest efficiencies of natural gas furnaces available for purchase with today's technology. Please note that 96% efficient furnaces such as this one require plasic/pvc flue venting, and 80% efficient furnaces require plastic/PVC flue venting.
Single Stage Furnace
A single stage furnace operates using the same amount of energy every time is turns on. The GD9S960403BN Goodman gas furnace operates using only one heat output. This furnace will operate at 100% output whenever it is operating.
Natural Gas or LP Furnace
From the factory, the GD9S960403BN runs on natural gas. However all Goodman gas furnaces can be converted to propane using the furnace's corresponding LP conversion kit, an optional accessory at an additional cost that consists of a replacement set of orifices and springs.
9-Speed ECM Blower Motor
The GD9S960403BN utilizes a 9-speed ECM motor, which is more efficient than older PSC blower motors, saving you money in electric bills.
Warranty
With installation that follows your state and local codes and with online registration, all Goodman furnaces come with a 10-year parts and lifetime heat exchanger warranty through the manufacturer.
Durable Hot Surface Igniter
Instead of a standing pilot light, the GD9S960403BN has a newer, more efficient hot surface igniter. Hot surface igniters are much more efficient and safer than standard standing pilot lights.
Self-Diagnostic Control Board
The Goodman brand has improved technology from years of production experience, allowing for a long-lasting product that rarely runs into any operation-based problems. However, if the furnace does need maintenance or warranty work, the control board has a set of sensors that will identify any basic problems in the furnace's basic operation.
Heavy Gauge Steel Cabinet
The GD9S960403BN Goodman gas furnace has a durable outer cabinet. The heavy-gauge steel used in the furnace's design allows for a more protected interior, and less air leakage from the furnace's operation, resulting in a more quiet operation while still decreasing operation costs.
Ease of Installation
From enhanced operation to efficiency, the Goodman gas furnaces have a lot to offer. However, Goodman's features don't stop at quality of unit. The GD9S960403BN allows for a significantly more streamlined installation process with its universal design, consisting of its ability to be installed in either downflow or horizontal configurations, lowering labor costs.
Ecobee Smart WiFi Thermostat with Alexa
The Ecobee is more than a smart thermostat. Most thermostats only read the temperature in one place (usually the hallway) which can make other rooms uncomfortable. Ecobee5 comes with a room sensor to help manage hot or cold spots. When you place sensors in your favorite rooms, ecobee5 can read the temperature and detect occupancy. That's how it ensures comfort in the rooms that matter.
With Amazon Alexa Voice Service built inside, ecobee5 can perform the many 'skills' that come with Alexa. All you have to do is ask, and watch the blue light pipe on top of the thermostat blink in response. For total hands-free control, it can even hear you from across the room. Imagine you’re throwing a last-minute dinner party. Simply ask your ecobee5 to walk you through each step out loud – from finding the right recipes to the ideal music playlist. ecobee5 has embedded microphones with far-field voice recognition and a speaker engineered for clear voice and full sound. It’s the smart thermostat that looks at home on your wall – that you can hear and speak to from across the room.
Features
Not at your thermostat? No problem.
Adjust temperature and comfort settings easily from the ecobee mobile app on your Android and iOS devices, including Apple Watch.
Connects to your existing home network
Convenient Wi-Fi capabilities offer a secure and reliable connection.
Knows you have a life
Vacationing and forgot to let your ecobee know? Make a vacation event using the ecobee mobile app. If something’s wrong with your equipment, we can send you service alerts and reminders.
Control the volume
If it's getting a little loud for your taste, you can use the app to adjust the volume.
Built to last
ecobee thermostats are hardwired, which means your thermostat isn’t relying on a battery or your HVAC equipment to charge itself.
No-Tear 30 Feet of 3/8" x 3/4" - Black
Ensure smooth refrigerant flow and HVAC system efficiency with this no-tear 30-foot insulated line set. Designed for seamless connection between an outdoor condensing unit and an indoor air handler or evaporator coil, this line set offers durability, flexibility, and superior thermal insulation for high-performance HVAC applications.
Features:
3/8" liquid line (LL) and 3/4" suction line (SL) for optimal refrigerant transfer.
Extra thick 1/2" insulation to prevent tears during installation and from age.
30' long line set - Standard line set length for your typical HVAC installation.
Flexible and durable copper tubing allows for smooth routing and secure connections.
Durable, No-Tear Line Sets Built for Tough Installations
No-tear line sets are designed to eliminate one of the most common frustrations during HVAC installations—insulation that rips, tears, or breaks down over time. Built with enhanced durability and UV-resistant insulation, these line sets maintain their integrity during handling, installation, and long-term outdoor exposure. The result is a cleaner install, better protection, and fewer callbacks compared to standard line sets.
Key Benefits
No-Tear Insulation Construction – Resists ripping and damage during installation
Enhanced Durability – Holds up to jobsite handling and long-term use
UV-Resistant Jacket – Protects against sun exposure and outdoor degradation
Cleaner Installation Finish – Maintains a professional look without patching or tape
Long-Term Insulation Performance – Helps prevent breakdown over time
Contractor-Friendly Design – Easier to work with compared to standard line sets
Built to Withstand Real Jobsite Conditions
Traditional line sets often use insulation that can tear easily when pulled through walls, around corners, or across rough surfaces. No-tear line sets are engineered with a reinforced outer jacket that resists damage during installation, helping maintain insulation integrity from start to finish. This added durability not only improves installation efficiency but also reduces the need for repairs, tape, or replacement sections—saving time on the job and delivering a more professional final result.
UV Protection for Long-Term Outdoor Performance
Standard insulation can degrade when exposed to sunlight, leading to cracking, peeling, and reduced performance over time. No-tear line sets feature a UV-resistant outer layer designed to withstand prolonged outdoor exposure, helping preserve insulation quality and system efficiency. This makes them an ideal choice for installations where line sets are exposed along exterior walls or rooftops.
The ACiQ TL04-1 Smart Thermostat is engineered to bring precise, intelligent control to your home’s HVAC system. Compatible with both standard 24V wiring and HA & HB communication protocols, it delivers flexibility for new builds or system upgrades.
QUICK FACTS
Dual Compatibility: Supports 24V systems and HA/HB non-polarity communication systems
Control Options: Works with single and two-stage heating, cooling, and heat pump systems with auxiliary/emergency heat
Modern Touchscreen: Auto-wake screen with responsive touch interface
Clean Installation: Includes M-base, trim plate, wire labels, screws, and anchors
Smart Safety: Built-in installation tips, safety reminders, and FCC/IC compliance
Perfect for homeowners looking to upgrade their comfort with modern, intelligent technology
No-Tear 30 Feet of 3/8" x 3/4" - White
Ensure smooth refrigerant flow and HVAC system efficiency with this no-tear 30-foot insulated line set. Designed for seamless connection between an outdoor condensing unit and an indoor air handler or evaporator coil, this line set offers durability, flexibility, and superior thermal insulation for high-performance HVAC applications.
Features:
3/8" liquid line (LL) and 3/4" suction line (SL) for optimal refrigerant transfer.
Extra thick 1/2" insulation to prevent tears during installation and from age.
30' long line set - Standard line set length for your typical HVAC installation.
Flexible and durable copper tubing allows for smooth routing and secure connections.
Durable, No-Tear Line Sets Built for Tough Installations
No-tear line sets are designed to eliminate one of the most common frustrations during HVAC installations-insulation that rips, tears, or breaks down over time. Built with enhanced durability and UV-resistant insulation, these line sets maintain their integrity during handling, installation, and long-term outdoor exposure. The result is a cleaner install, better protection, and fewer callbacks compared to standard line sets.
Key Benefits
No-Tear Insulation Construction - Resists ripping and damage during installation
Enhanced Durability - Holds up to jobsite handling and long-term use
UV-Resistant Jacket - Protects against sun exposure and outdoor degradation
Cleaner Installation Finish - Maintains a professional look without patching or tape
Long-Term Insulation Performance - Helps prevent breakdown over time
Contractor-Friendly Design - Easier to work with compared to standard line sets
Built to Withstand Real Jobsite Conditions
Traditional line sets often use insulation that can tear easily when pulled through walls, around corners, or across rough surfaces. No-tear line sets are engineered with a reinforced outer jacket that resists damage during installation, helping maintain insulation integrity from start to finish. This added durability not only improves installation efficiency but also reduces the need for repairs, tape, or replacement sections-saving time on the job and delivering a more professional final result.
UV Protection for Long-Term Outdoor Performance
Standard insulation can degrade when exposed to sunlight, leading to cracking, peeling, and reduced performance over time. No-tear line sets feature a UV-resistant outer layer designed to withstand prolonged outdoor exposure, helping preserve insulation quality and system efficiency. This makes them an ideal choice for installations where line sets are exposed along exterior walls or rooftops.
30 Feet of 3/8" x 3/4"
Line sets are the copper lines which connect an outdoor condensing unit/heat pump to an inside air handler or evaporator coil. Line sets are available in different lengths and diameters to fit most applications.
No-Tear 50 Feet of 3/8" x 3/4" - Black
Ensure smooth refrigerant flow and HVAC system efficiency with this no-tear 50-foot insulated line set. Designed for seamless connection between an outdoor condensing unit and an indoor air handler or evaporator coil, this line set offers durability, flexibility, and superior thermal insulation for high-performance HVAC applications.
Features:
3/8" liquid line (LL) and 3/4" suction line (SL) for optimal refrigerant transfer.
Extra thick 1/2" insulation to prevent tears during installation and from age.
50' long line set - Ideal for HVAC setups requiring a longer line set run.
Flexible and durable copper tubing allows for smooth routing and secure connections.
Durable, No-Tear Line Sets Built for Tough Installations
No-tear line sets are designed to eliminate one of the most common frustrations during HVAC installations—insulation that rips, tears, or breaks down over time. Built with enhanced durability and UV-resistant insulation, these line sets maintain their integrity during handling, installation, and long-term outdoor exposure. The result is a cleaner install, better protection, and fewer callbacks compared to standard line sets.
Key Benefits
No-Tear Insulation Construction – Resists ripping and damage during installation
Enhanced Durability – Holds up to jobsite handling and long-term use
UV-Resistant Jacket – Protects against sun exposure and outdoor degradation
Cleaner Installation Finish – Maintains a professional look without patching or tape
Long-Term Insulation Performance – Helps prevent breakdown over time
Contractor-Friendly Design – Easier to work with compared to standard line sets
Built to Withstand Real Jobsite Conditions
Traditional line sets often use insulation that can tear easily when pulled through walls, around corners, or across rough surfaces. No-tear line sets are engineered with a reinforced outer jacket that resists damage during installation, helping maintain insulation integrity from start to finish. This added durability not only improves installation efficiency but also reduces the need for repairs, tape, or replacement sections—saving time on the job and delivering a more professional final result.
UV Protection for Long-Term Outdoor Performance
Standard insulation can degrade when exposed to sunlight, leading to cracking, peeling, and reduced performance over time. No-tear line sets feature a UV-resistant outer layer designed to withstand prolonged outdoor exposure, helping preserve insulation quality and system efficiency. This makes them an ideal choice for installations where line sets are exposed along exterior walls or rooftops.
No-Tear 50 Feet of 3/8" x 3/4" - White
Ensure smooth refrigerant flow and HVAC system efficiency with this no-tear 50-foot insulated line set. Designed for seamless connection between an outdoor condensing unit and an indoor air handler or evaporator coil, this line set offers durability, flexibility, and superior thermal insulation for high-performance HVAC applications.
Features:
3/8" liquid line (LL) and 3/4" suction line (SL) for optimal refrigerant transfer.
Extra thick 1/2" insulation to prevent tears during installation and from age.
50' long line set - Ideal for HVAC setups requiring a longer line set run.
Flexible and durable copper tubing allows for smooth routing and secure connections.
Durable, No-Tear Line Sets Built for Tough Installations
No-tear line sets are designed to eliminate one of the most common frustrations during HVAC installations-insulation that rips, tears, or breaks down over time. Built with enhanced durability and UV-resistant insulation, these line sets maintain their integrity during handling, installation, and long-term outdoor exposure. The result is a cleaner install, better protection, and fewer callbacks compared to standard line sets.
Key Benefits
No-Tear Insulation Construction - Resists ripping and damage during installation
Enhanced Durability - Holds up to jobsite handling and long-term use
UV-Resistant Jacket - Protects against sun exposure and outdoor degradation
Cleaner Installation Finish - Maintains a professional look without patching or tape
Long-Term Insulation Performance - Helps prevent breakdown over time
Contractor-Friendly Design - Easier to work with compared to standard line sets
Built to Withstand Real Jobsite Conditions
Traditional line sets often use insulation that can tear easily when pulled through walls, around corners, or across rough surfaces. No-tear line sets are engineered with a reinforced outer jacket that resists damage during installation, helping maintain insulation integrity from start to finish. This added durability not only improves installation efficiency but also reduces the need for repairs, tape, or replacement sections-saving time on the job and delivering a more professional final result.
UV Protection for Long-Term Outdoor Performance
Standard insulation can degrade when exposed to sunlight, leading to cracking, peeling, and reduced performance over time. No-tear line sets feature a UV-resistant outer layer designed to withstand prolonged outdoor exposure, helping preserve insulation quality and system efficiency. This makes them an ideal choice for installations where line sets are exposed along exterior walls or rooftops.
50 Feet of 3/8" x 3/4"
Ensure efficient refrigerant flow and optimal HVAC performance with this 50-foot insulated line set. Designed for seamless connection between an outdoor condensing unit or heat pump and an indoor air handler or evaporator coil, this line set offers durability, flexibility, and superior thermal protection for long-lasting operation.
Key Features:
✔ Premium Copper Tubing: 3/8" liquid line (LL) and 3/4" suction line (SL) for efficient refrigerant transfer. ✔ Pre-Insulated for Efficiency:3/8" thick insulation minimizes energy loss and condensation buildup. ✔ Versatile Application: Compatible with heat pumps and conventional split systems. ✔ Easy Installation:Flexible and durable copper tubing allows for smooth routing and connection. ✔ Extended 50-Foot Length: Ideal for larger residential and light commercial HVAC installations.
Upgrade your HVAC system with this high-quality insulated line set, engineered for reliability, efficiency, and ease of installation.
You will need Adobe® Acrobat® Reader to view PDF documents.
Safety Information
This gas appliance requires a trained technician to install. Improperly connecting gas lines or improperly connecting a gas flue or venting may result in death. By purchasing this item, you are agreeing that you are using a trained technician to install this gas appliance. We will not be responsible for any injury or property damage arising from improper service or service procedures. Whoever installs or services this unit assumes responsibility for any personal injury or property damage which may result. Many jurisdictions require a license to install this equipment.
This product and many products on our site may contain a chemical know to the state of California to cause cancer or birth defects or other reproductive harm. For more information about Proposition 65 please Click Here.
Goodman 1.5 Ton 14.3 SEER2 Central Air Conditioner Condenser - R32 Single Stage
Feature
Spec
SKU
GLXS4BA1810
Weight (in lbs)
132
Brand/Manufacturer
Goodman
Replaces
GSXN401810; GSX140181
UPC
663051691605
Cooling BTU
18,000
Decibel Level (dBA)
74
Horsepower
1/8 HP
Refrigerant
R32
SEER2 (Efficiency)
14.3
Condenser Stages
Single Stage
Compressor Type
Rotary
Liquid Line
3/8"
Suction Line
3/4"
Liquid Valve Size
3/8"
Suction Valve Size
3/4"
Electrical
208/230v 1 Phase 60Hz
Max Breaker Size
15 Amps
Min. Breaker Size
10.9 Amps
Tonnage
1.5 Ton
Connection
Sweat
Height
27"
Width
26"
Depth
26"
Warranty
10 Years Parts Limited Warranty with Online Registration
This product and many products on our site may contain a chemical know to the state of California to cause cancer or birth defects or other reproductive harm. For more information about Proposition 65 please Click Here.
This product and many products on our site may contain a chemical know to the state of California to cause cancer or birth defects or other reproductive harm. For more information about Proposition 65 please Click Here.
This product and many products on our site may contain a chemical know to the state of California to cause cancer or birth defects or other reproductive harm. For more information about Proposition 65 please Click Here.
50 Feet of 3/8" LL x 3/4" SL x 1/2" No-Tear Insulated Line Set - White
This product and many products on our site may contain a chemical know to the state of California to cause cancer or birth defects or other reproductive harm. For more information about Proposition 65 please Click Here.
50 Feet of 3/8" LL x 3/4" SL x 1/2" No-Tear Insulated Line Set - Black
This product and many products on our site may contain a chemical know to the state of California to cause cancer or birth defects or other reproductive harm. For more information about Proposition 65 please Click Here.
30 Feet of 3/8" LL x 3/4" SL x 1/2" No-Tear Insulated Line Set - White
This product and many products on our site may contain a chemical know to the state of California to cause cancer or birth defects or other reproductive harm. For more information about Proposition 65 please Click Here.
30 Feet of 3/8" LL x 3/4" SL x 1/2" No-Tear Insulated Line Set - Black
This product and many products on our site may contain a chemical know to the state of California to cause cancer or birth defects or other reproductive harm. For more information about Proposition 65 please Click Here.
This product and many products on our site may contain a chemical know to the state of California to cause cancer or birth defects or other reproductive harm. For more information about Proposition 65 please Click Here.
Propane (LP) Conversion Kit for Goodman GR9S96, GD9S96, and GR9S92 Furnaces
This product and many products on our site may contain a chemical know to the state of California to cause cancer or birth defects or other reproductive harm. For more information about Proposition 65 please Click Here.
This product and many products on our site may contain a chemical know to the state of California to cause cancer or birth defects or other reproductive harm. For more information about Proposition 65 please Click Here.
This product and many products on our site may contain a chemical know to the state of California to cause cancer or birth defects or other reproductive harm. For more information about Proposition 65 please Click Here.
Santa Fe Ultra70 Whole-Home Ventilating Dehumidifier, 70-pint | R454B
Feature
Spec
SKU
UL3684
Weight (in lbs)
55
Size
70 Pints
Brand/Manufacturer
Santa Fe
UPC
810017961634
Included Items
Leveling feet (4), MERV 13 filter (9” x 11” x 1”), 8” round duct collars (2)
This product and many products on our site may contain a chemical know to the state of California to cause cancer or birth defects or other reproductive harm. For more information about Proposition 65 please Click Here.
This product and many products on our site may contain a chemical know to the state of California to cause cancer or birth defects or other reproductive harm. For more information about Proposition 65 please Click Here.
This product and many products on our site may contain a chemical know to the state of California to cause cancer or birth defects or other reproductive harm. For more information about Proposition 65 please Click Here.
This product and many products on our site may contain a chemical know to the state of California to cause cancer or birth defects or other reproductive harm. For more information about Proposition 65 please Click Here.
ACiQ Non-Programmable 1H/1C Large Display Thermostat
This product and many products on our site may contain a chemical know to the state of California to cause cancer or birth defects or other reproductive harm. For more information about Proposition 65 please Click Here.
50 Feet of 3/8" LL x 3/4" SL x 3/8" Insulated Line Set
This product and many products on our site may contain a chemical know to the state of California to cause cancer or birth defects or other reproductive harm. For more information about Proposition 65 please Click Here.
30 Feet of 3/8" LL x 3/4" SL x 3/8" Insulated Line Set
Many buyers report quick shipping—often within 3 days or even next day—easy or fairly easy installation, and solid cooling performance, including one 2-year-old unit still blowing 47° air at the registers and a 3‑ton system lowering energy bills, while a furnace upgrade to 40,000 BTU replaced a 15-year unit successfully. However, some Goodman models drew complaints for loud condenser noise, a compressor failure on install, repeated capacitor failures within four years (or under three), and one 14 SEER “4-ton” unit delivering 3.5 tons and only maintaining 82° in 116° heat, with warranty limitations noted.
AI Generated from the text of customer reviews
Top reviews
Happy happy customer
Quality
100%
Service
100%
Price
100%
This is a great company with great products. The owner of this company is an amazing man who cares deeply for people, and it shows with the way they do business. I highly recommend purchasing any and all HVAC equipment from HVACDIRECT.COM
Review byCustomer
Posted on
Goodman refuses to fix
Quality
20%
Service
20%
Price
60%
The concerns the maker, not HVACDirect. Goodman's warranty has an absolute arbitration clause, clue #1 CYA and they would not their mistake with the homeowner direct. They will talk to your professional installer OR who sold the unit. Problem: The spy hole in the bottom panel is in the wrong place - Error codes are NOT visible unless the cover is removed, which the interlock switch prevents the unit from operating. The circuit bd placement or assembly error is not something the homeowner needs to spend $$ correcting. I have no respect for Goodman, and the 1 stars reflect upon them. Is it just my unit? That's why a class action would help but it is not legally allowed.
Review byCliffOnTheRoad
Posted on
Great product
Quality
100%
Service
100%
Price
100%
Everything from the beginning to the end was a great experience and even a better unit. The only thing I'd like to suggest is to put stickers on the shipping box and on the A-Coil itself to indicate that the R-32 sensor is locate inside the A-Coil box.
Review byEd
Posted on
Furnace
Quality
100%
Service
100%
Price
100%
Ship quick showed up undamaged and works as it should
Review byDan
Posted on
Goodman Condenser
Quality
80%
Service
100%
Price
80%
The condenser is VERY noisy.
1. A compressor sound blanket would have helped a lot. I would have gladly paid $100 for the add.
2. There's a small section of low pressure pipe that's not insulated causing condensation leaking inside the condenser.
Review byBoyd A. Lott
Posted on
Good
Quality
100%
Service
80%
Price
100%
Only problem it took me about three weeks to get it of course it was between the holly days
Review byJesus
Posted on
internet ac
Quality
100%
Service
100%
Price
80%
great service and great shipping,no damage on six units.
Review byort
Posted on
Goodman furnace
Quality
100%
Service
100%
Price
100%
Fairly easy install and it works like a champ so far
AI Generated from the text of customer reviews