0% Financing for 24 Months* Available - Buy Now and Pay later!

2 Ton 15.2 SEER2 80% AFUE 60,000 BTU Goodman Gas Furnace and R32 Heat Pump System - Horizontal

Required Fields *

By

Goodman

In stock

Model

GLZS4BA2410 / CHPTA2426B3 / GMVC800604BN

ID

183098

In Stock - Ready to Ship
Was $5,707.00
Your Low Price $5,179.00
 
Free Shipping
Customize 2 Ton 15.2 SEER2 80% AFUE 60,000 BTU Goodman Gas Furnace and R32 Heat Pump System - Horizontal
Goodman 2 Ton 14.3 SEER2 Heat Pump Condenser - R32 Single Stage
Goodman 2 Ton 14.3 SEER2 Heat Pump Condenser - R32 Single Stage   + $2,335.00
2 Ton 17.5" Height Goodman Horizontal Cased Evaporator Coil - TXV - R32
2 Ton 17.5" Height Goodman Horizontal Cased Evaporator Coil - TXV - R32   + $805.00
Goodman 80% 60,000 BTU Variable Speed Modulating Gas Furnace - 17.5" Width - Upflow / Horizontal
Goodman 80% 60,000 BTU Variable Speed Modulating Gas Furnace - 17.5" Width - Upflow / Horizontal   + $1,909.00
Goodman Furnace Integration Kit - R32
Goodman Furnace Integration Kit - R32   + $130.00
30 Feet of 3/8" x 3/4"
ACiQ Single-Stage Dual Powered Non-Programmable Thermostat
Santa Fe Ultra70 Whole House Dehumidifier - 110/120V - R454B (SKU 4044100)
Wall Mount Bracket for Condensers 48"
Installation Kit for Condensers
Propane (LP) Conversion Kit for Goodman GR9T80 and GD9T80 Furnaces
2 Ton 15.2 SEER2 80% AFUE 60,000 BTU Goodman Gas Furnace and R32 Heat Pump System - Horizontal - GLZS4BA2410 / CHPTA2426B3 / GMVC800604BN

$5,179.00

Requires: Metal Flue Vent Piping

A Goodman combination system is a great choice to keep your home comfortable all season long. With tons of extra features and a great price, a Goodman furnace and heat pump system is the perfect choice for all of your heating and cooling needs.

Disclaimer: This system contains R-32 refrigerant, classified as an A2L refrigerant, and requires a refrigerant leakage detection system to be installed. To comply with safety standards, the furnace in this system must be equipped with the included Furnace Integration Kit for R32 systems (SKU 0230K00044). Failure to comply with these requirements may result in safety hazards and could void the warranty. Please call us at 1-800-397-1392 if you have any questions.

Goodman 2 Ton 14.3 SEER2 Heat Pump Condenser - R32 Single Stage

OVERVIEW

The Goodman GLZS4BA2410 heat pump condenser is a standard efficiency, low-cost solution for an all-electric home when paired with a suitable heat pump coil or air handler. Just like all of Goodman's equipment, the GLZS4BA2410 is manufactured with high-quality materials to provide a superior comfort in your home.

Utilizing advanced technology, the Goodman heat pump condenser efficiently transfers heat between the indoors and outdoors, providing both heating and cooling functionalities in a single unit for year-round comfort. With its straightforward installation process, it not only ensures convenience but it's also cost-efficient, making it an ideal choice for those seeking an energy-efficient and hassle-free heating and cooling solution.

QUICK FACTS

  • Ideal size to cover a smaller house in ideal climates
  • 2 ton, 14.3 SEER2 heat pump condenser
  • R32: Complies with Clean Air Act New Refrigerant Requirements
  • Low sound output
  • Fully charged for up to 15' of line set
  • Factory-installed bi-flow filter drier

2 Ton

The Goodman GLZS4BA2410 heat pump has a capacity of 2 tons. In an ideal climate, this tonnage will normally cover up to a small house. In some bundles, the air handler or coil associated with this condenser may be intentionally larger in tonnage to maintain the unit's overall efficiency. Please note that an indoor air handler or coil that is compatible with heat pumps is required for this unit to function.

14.3 SEER2

At 14.3 SEER2, the GLZS4BA2410 heat pump condenser has the industry-standard minimum, allowing the unit to remain inexpensive upfront in comparison to higher SEER2 ratings. If you are replacing an existing heat pump, in most cases this SEER2 rating will still be higher than your old unit, allowing it to still save you money over time in energy bills.

Warranty

The GLZS4BA2410 condenser comes with Goodman's standard 10 year parts warranty with online registration through the manufacturer. An installation that follows your state and local codes is required for the warranty to be upheld.

Durability and Reliability

The Goodman GLZS4BA2410 heat pump condenser is manufactured with a durable cabinet with paint that is approved for 500 hours of salt spray, making it compliant with the 2010 Florida building code unit integrity requirements for hurricane-like weather when properly anchored to your local codes. The built-in bi-flow liquids line filter drier protects the unit from impurities in the refrigerant and other general wear and tear, increasing the reliability of the unit.

Installation and Maintenance

The Goodman GLZS4BA2410 has easily accessible gauge ports and service valves with sweat connections, allowing for a faster and easier installation process. There are factory-installed features such as a filter drier, compressor crankcase heater, pressure switches, and a high-capacity muffler so your installer doesn't have to, further providing ease to the installation process. Moreover, the cabinet of the unit is fit with two maintenance access panels: one on the top and one on the side. All of these features lower your installation and maintenance costs, keeping more money in your pocket to spend on the things you care about most.

Comfort in Mind

With its sound control top insulation and SmartShift technology for quiet and reliable defrost cycles, the GLZS4BA2410 heat pump has some of the lowest sound outputs on a single stage unit on the market today.

Why Buy at HVACDirect.com

HVACDirect.com is one of the leading and reliable sources for top-quality heat pump systems. With its superior energy efficiency, our heat pumps not only provide significant upfront cost savings but also ensures long-term economic benefits through reduced energy consumption. Known for delivering heat pump package units that excel in both performance and durability, we are a trusted choice for various heating and cooling needs. Our customers can confidently rely on the efficiency and effectiveness of our heat pump systems, making us a preferred destination for those seeking high-performance solutions in the HVAC industry and a trusted choice for various heating and cooling needs.

Disclaimer: This condenser contains R-32 refrigerant, classified as an A2L refrigerant, and requires a refrigerant leakage detection system to be installed. To comply with safety standards, this unit must be paired with an R-32 air handler or evaporator coil already equipped with a leakage detection system. Failure to comply with these requirements may result in safety hazards and could void the warranty. Please call us at 1-800-397-1392 if you have any questions.

2 Ton 17.5" Height Goodman Horizontal Cased Evaporator Coil - TXV - R32

OVERVIEW

The Goodman CHPTA2426B3 evaporator coil is ready for any horizontal installation that you need it for. With a built-in TXV kit for efficiency, the CHPTA2426B3 lives up to Goodman's expectations to provide an enhanced comfort with a superior efficiency, all while staying within your budget. If you want the best possible coil for your home, this is it.

Quick Facts

  • 2 ton horizontal evaporator coil
  • Can be used with heat pump and AC-only condensers
  • R32: Complies with Clean Air Act New Refrigerant Requirements
  • Galvanized, embossed, and insulated coil cabinet to protect the coil and prevent air leakage
  • Factory-installed TXV kit

2 Tons

At an output of 2 tons, the Goodman CHPTA2426B3 evaporator coil is ready for almost any horizontal application that matches that output need. In entire system configurations, the coil will be either larger or the same size as the condenser's tonnage. As such, the tonnages of the coil and the condenser may be different in order to maintain the unit's efficiency. Please note that for this coil to function, a furnace or blower and a condenser is required, all sold separately. This coil is not designed to replace a coil in a single-piece air handler.

Warranty

The CHPTA2426B3 coil is covered under Goodman's standard 10 year parts warranty when the unit is installed following your state and local codes, the coil is paired with a compatible R32 condenser, and the entire system is registered online through the manufacturer.

Installation and Durability

The Goodman CHPTA2426B3 horizontal evaporator coil is designed with aluminum tubing and fin coils, lowering wear and tear on the unit. The coil also comes with a TXV kit factory-installed, making it one less thing for your installer to have to install, lowering installation costs. For easier maintenance access, the front of the coil's durable cabinet has a split-seam.

Enhanced Comfort and Efficiency

The Goodman CHPTA2426B3 horizontal evaporator coil's built-in TXV kit provides a significant increase in refrigerant control, increasing the overall efficiency of the entire system and providing a more precise temperature output to make you more comfortable in your home. On top of that, the coil has a mold-resistant, thermoplastic drain pan set that lowers potentially dangerous particle buildup. All of these features allow the CHPTA2426B3 to live up to the Goodman quality name.

Goodman 80% 60,000 BTU Variable Speed Modulating Gas Furnace - 17.5" Width - Upflow / Horizontal

OVERVIEW

The GMVC80604BN gas furnace is from one of the top-of-the-line series by Goodman. Considered one of the best of the best, this furnace has a two stage burner and a variable speed blower motor. With the best durability and reliability that Goodman 80% efficient furnaces have to offer, we are proud to offer you the Goodman GMVC80604BN gas furnace.

QUICK FACTS

  • This furnace is ideal to heat a small to medium house (in average climate conditions)
  • 60,000 BTU 80% AFUE two stage variable speed natural gas furnace
  • Requires metal flue venting
  • Can be used in the upflow or horizontal orientation
  • Can be converted to propane with an LP conversion kit (sold separately)
  • Innovative design for electrical efficiency, safety, and lower sound output
60,000 BTU

At an input of 60,000 BTU’s, the GMVC80604BN Goodman gas furnace is suitable for up to a small to medium house in an average climate. The output of this furnace is 48,000 BTU’s, which is calculated by the input times the 80% efficiency rating.

80% Efficiency Rating

With the industry standard efficiency of 80% AFUE, the GMVC80604BN Goodman gas furnace uses 80% of the fuel going into the furnace to heat your home and the remaining 20% of the fuel going into it is used up in normal furnace operations and is lost out of the flue venting. The GMVC80604BN requires metal flue venting like any 80% efficient furnace, while anything 90% and above would require plastic or PVC venting.

Please note that this furnace does not comply with California Low NOx or Ultra-Low NOx regulations. If you have any questions, please contact us.

Two Stage Variable Speed Furnace

The GMVC80604BN is equipped with two stages, allowing for an adjusted heat output to better suit your home’s comfort needs. The integrated variable speed blower on the furnace allows for an exact airflow output based on the requirements for your home as calculated by the control board and thermostat, keeping your home at a more constant temperature and increasing efficiency overall.

Warranty

The GMVC80604BN comes standard with Goodman’s 10 year parts warranty and its phenomenal lifetime heat exchanger warranty. In order to maintain this warranty, the installation must follow your state and local codes and the unit must be registered online through the manufacturer.

Durability and Reliability

The tubular heat exchanger on the GMVC80604BN is heavy-duty for constant use in the winter. Made of aluminized steel, Goodman heat exchangers provide fast and efficient heat transfer rates, all the while increasing the furnace’s dependability and reliability. The heavy-duty exterior of the unit protects all of the unit’s internal mechanisms and the secure cabinet lowers air leakage and sound output in comparison to its competitors, all providing enhanced comfort that lasts a long time.

Installation

The GMVC80604BN furnace runs natively on natural gas. When you use Goodman’s associated LP conversion kit (found here at an additional cost), this furnace can use propane instead when the installation calls for it. This Goodman furnace is also able to be installed in the upflow or horizontal positions, allowing for a broader application potential.

Goodman Furnace Integration Kit - R32

Goodman Furnace Integration Kit for R-32 Refrigerant Systems

The Goodman Furnace Integration Kit is designed to seamlessly integrate with R-32 refrigerant systems, enhancing system efficiency and performance. This kit includes all necessary components to ensure a smooth installation and optimal operation of your heating system. Ideal for those upgrading to R-32 refrigerant, it supports environmental sustainability while providing reliable heating. Upgrade your system with this advanced kit to achieve both efficiency and eco-friendliness.

Propane (LP) Conversion Kit for Goodman GR9T80 and GD9T80 FurnacesThis propane (LP) conversion kit is for Goodman's GR9T80 and GD9T80 furnace series.
Installation Kit for Condensers - Accessory Set

Ensure a professional and secure installation for your condenser with this comprehensive installation kit. Designed to provide all the essential components needed for a smooth setup, this kit helps protect your system while ensuring proper electrical and refrigerant connections.

Key Features:

All-in-One Kit: Includes key accessories for a professional-grade installation.
Enhanced System Protection: Features a surge protector and disconnect safety switch for added safety.
Reliable Electrical Connections: Comes with a whip and charging adapter to ensure proper power supply.
Secure Wall Penetration: Telescoping wall sleeve protects and stabilizes refrigerant and electrical lines.
HVAC Professional Recommended: Ideal for new installations and system replacements.

What’s Included:

  • 1/2" x 6' Electrical Whip – SKU: 84136
  • 60A Non-Fused Disconnect – SKU: 83335
  • Surge Protector – SKU: ICM517
  • CPS Charging Adapter – SKU: 87-AD87
  • Telescoping Wall Sleeve – SKU: NFP-75

Equip your condenser with everything needed for a safe, durable, and professional installation. Order your Condenser Installation Kit today!

E Lite Equipment Pad 32" x 32" x 3"

E Lite is a plastic pad designed as a mounting base for air conditioning condensers. The rugged design provides uniform and generous ribbing for optimum, self-leveling ground support without inserts. E Lite is injection molded from polypropylene, resulting in a pad that is lightweight, but not too light. A subtle texture prevents unit slide and presents a classic appearance, which is enhanced by rounded edges and a concrete gray color. Each pad is molded with its size in raised letters.

  • High recycled plastic content
  • Subtle texture resists unit slide
  • Unaffected by UV or weather
  • Uniform ribbing transfers load evenly
  • Drillable for securing unit
  • Lightweight, yet rugged

No Return Policy

All sales of this product are final and are non-refundable.

Wall Mount Bracket for Condensers 48"

This wall mount bracket is perfect for outdoor condensers. The length of the the wall bracket arms are 48" long. The condensing unit is mounted onto the L-shaped brackets and fastened using bolts and anti-vibration washers (not included with brackets).

Features:

  • Steel: 10 GA
  • Powder-coated grey Finish
  • Load rating: 600 lbs per pair
  • Holes will accommodate anchors for installation
  • Warranty: 1 year
  • ACB line of wall brackets are approved by the Florida Building Commission and are High Velocity Hurricane Zone (HVHZ) approved. (See product certification documentation for complete details.)

No Return Policy

All sales of this product are final and are non-refundable.

Santa Fe Classic Dehumidifier - 110/120V - R410A (SKU 4044710)

Santa Fe Classic Whole Home Dehumidifier - 110/120V - R454B

The Santa Fe Classic is a high-efficiency whole-home dehumidifier engineered to effectively manage excess humidity throughout residential spaces. Designed for integration with your home's HVAC system or for standalone use, this powerful unit removes up to 116 pints of moisture per day in areas up to 2,900 square feet.

High Efficiency

With a low power draw of just 4.5 amps, the Santa Fe Classic delivers exceptional performance without excessive energy consumption. It features a highly efficient MERV-13 filter to improve indoor air quality and utilizes R454B refrigerant—an environmentally friendly upgrade that enhances its overall sustainability.

Versatile Applications

  • Flexible Installation: Can be installed as a free-standing unit or ducted to integrate seamlessly with your home's HVAC system.
  • Compact & Powerful: Weighs 110 lbs and measures 20” wide for convenient placement in various residential settings.
  • Easy Setup: Comes with a 9 ft power cord for quick plug-in installation.

Industry Usage: Ideal for homes, apartments, condominiums, garages, crawl spaces, gyms, and workshops.

Operating Temperature Range: Best performance occurs between 56°F and 95°F.

Bonus Features

  • Auto Restart: Automatically resumes operation after a power outage for uninterrupted performance.
  • Advanced Control Panel: Equipped with a manual humidistat for direct control over your desired humidity levels.
  • Automatic Defrost: Built-in defrost functionality ensures optimal operation in cooler environments.
  • Drain Hose Included: Comes with a 6 ft hose for convenient drainage setup.

Warranty

Backed by Santa Fe’s upgraded “Peace of Mind” warranty, the Classic model ensures long-term reliability and support:

  • 5-Year Warranty: Coverage against operational failures.
  • 6-Year Warranty: Protection for all faulty components.

Should a malfunction occur, Santa Fe will repair or replace the unit as needed. Please refer to the Owner’s Manual for full warranty terms and service instructions.

Santa Fe UltraMD33 In-Wall Dehumidifier - 110/120V - R454B (SKU 4044610)

Santa Fe Ultra MD33 Whole Home Dehumidifier - 110/120V - R454B

The Santa Fe Ultra MD33 is a compact, high-efficiency ventilating dehumidifier designed to control excess humidity across residential spaces. Perfect for homes up to 1,200 square feet, this unit removes up to 37 pints of moisture daily while blending seamlessly into your walls for a built-in, unobtrusive solution.

High Efficiency

Operating at only 2.2 amps, the Ultra MD33 delivers exceptional dehumidifying performance while consuming minimal energy. With the eco-conscious R454B refrigerant, it offers improved environmental responsibility. Its energy-saving design makes it one of the best choices for year-round humidity control.

Built-In Installation

  • Wall-Mount Design: Fits between standard wall studs for a flush, space-saving installation.
  • Installation Opening: Requires a 14.5"" wide by 30.25"" tall wall opening.
  • Flexible Wiring: Can be hardwired or plugged into a 120V outlet using the included 10 ft power cord.

Operations

Industry Usage: Ideal for houses, apartments, condominiums, and hotels.

Operating Temperature Range: Functions effectively between 49°F and 95°F for year-round use.

Bonus Features

  • Auto Restart: Automatically resumes operation following a power outage for consistent performance.
  • Advanced Control Panel: Includes a built-in humidistat to manually set and maintain your ideal humidity levels.
  • Automatic Defrost: Integrated defrost functionality prevents frost buildup in cooler environments.
  • Drain Hose Included: Comes with a 10 ft drain hose for continuous drainage.
  • Reusable Filter: The included washable filter offers long-term savings and efficient air filtration.

Warranty

The Santa Fe Ultra MD33 is covered by an industry-leading warranty for peace of mind:

  • 5-Year Warranty: Covers operational failures.
  • 6-Year Warranty: Covers defective components and materials.

In the event of a malfunction, Santa Fe will repair or replace the unit. Customers are encouraged to review their Owner’s Manual for full warranty terms and conditions.

Santa Fe Ultra70 Whole House Dehumidifier - 110/120V - R454B (SKU 4044100)

The Santa Fe Ultra70 is a high-efficiency, ventilating dehumidifier designed to control excess humidity throughout your entire home. Capable of integrating directly with your HVAC system, this unit removes up to 70 pints of moisture per day and is ideal for spaces up to 1,800 square feet.

High Efficiency

The Ultra70 is the perfect dehumidifier for residential use, including low-clearance crawl spaces, basements, and whole-house applications. Drawing just 4.1 amps, this unit offers powerful moisture control with low energy consumption. It utilizes a MERV-13 filter—one of the most efficient in its class—and uses R454B refrigerant for a more environmentally responsible performance.

Versatile Applications

  • Compact Design: Weighs just 55 lbs and measures only 12” wide, making it easy to place in tight spaces.
  • Flexible Installation: Can be used as a free-standing unit or ducted into your home's HVAC system.
  • Plug-in Ready: Includes a 9-foot power cord and plug-in wiring style for easy setup.

Industry Usage: Perfect for homes, apartments, and condominiums.

Operating Temperature Range: Effective in environments from 49°F to 95°F.

Bonus Features

  • Auto Restart: Automatically resumes operation after a power outage.
  • Advanced Control Panel: Includes a built-in dehumidistat for precise manual humidity control.
  • Automatic Defrost: Prevents frost buildup in colder environments for uninterrupted performance.

Warranty

Santa Fe offers an industry-leading warranty to ensure long-term performance and peace of mind:

  • 5-Year Warranty: Covers operational failures.
  • 6-Year Warranty: Covers faulty components.

In the event of a malfunction, Santa Fe will repair or replace the unit. Please refer to the Owner’s Manual for full warranty details and terms.

ACiQ TL04-1 Smart Thermostat – 24V & HA/HB Compatible

Smarter Comfort. Sleek Control.

The ACiQ TL04-1 Smart Thermostat is engineered to bring precise, intelligent control to your home’s HVAC system. Compatible with both standard 24V wiring and HA & HB communication protocols, it delivers flexibility for new builds or system upgrades.

 

QUICK FACTS

  • Dual Compatibility: Supports 24V systems and HA/HB non-polarity communication systems
  •  
  • Control Options: Works with single and two-stage heating, cooling, and heat pump systems with auxiliary/emergency heat
  • Modern Touchscreen: Auto-wake screen with responsive touch interface
  • Clean Installation: Includes M-base, trim plate, wire labels, screws, and anchors
  • Smart Safety: Built-in installation tips, safety reminders, and FCC/IC compliance
  • Perfect for homeowners looking to upgrade their comfort with modern, intelligent technology
Ecobee Smart WiFi Thermostat with Alexa

The Ecobee is more than a smart thermostat. Most thermostats only read the temperature in one place (usually the hallway) which can make other rooms uncomfortable. Ecobee5 comes with a room sensor to help manage hot or cold spots. When you place sensors in your favorite rooms, ecobee5 can read the temperature and detect occupancy. That's how it ensures comfort in the rooms that matter.

With Amazon Alexa Voice Service built inside, ecobee5 can perform the many 'skills' that come with Alexa. All you have to do is ask, and watch the blue light pipe on top of the thermostat blink in response. For total hands-free control, it can even hear you from across the room. Imagine you’re throwing a last-minute dinner party. Simply ask your ecobee5 to walk you through each step out loud – from finding the right recipes to the ideal music playlist. ecobee5 has embedded microphones with far-field voice recognition and a speaker engineered for clear voice and full sound. It’s the smart thermostat that looks at home on your wall – that you can hear and speak to from across the room.

Features

Not at your thermostat? No problem.

Adjust temperature and comfort settings easily from the ecobee mobile app on your Android and iOS devices, including Apple Watch.

Connects to your existing home network

Convenient Wi-Fi capabilities offer a secure and reliable connection.

Knows you have a life

Vacationing and forgot to let your ecobee know? Make a vacation event using the ecobee mobile app. If something’s wrong with your equipment, we can send you service alerts and reminders.

Control the volume

If it's getting a little loud for your taste, you can use the app to adjust the volume.

Built to last

ecobee thermostats are hardwired, which means your thermostat isn’t relying on a battery or your HVAC equipment to charge itself.

ACiQ Single-Stage Dual Powered Non-Programmable Thermostat

The ACiQ STN701 Single-Stage Dual Powered Non-Programmable Thermostat is a cost effective solution to temperature control! Designed with a bright blue backlight and large easy to read characters, ACiQ thermostats are easy to operate for all consumers.

  • 1 Heat / 1 Cool Non-Programmable Thermostat
  • Operable with AAA batteries or 24v power
  • Large, easy to ready clear LCD display with different backlight color options
  • Configurable with Electric or Gas Systems
  • Separate B & O terminals
  • Handles heating and cooling temperature swing adjustments separately
  • Toggleable 5 minute compressor delay protection
  • Temperature Range: 32°F-99°F (1°C-40°C)
  • Temperature Accuracy: ±1.8°F (±1°C)
50 Feet of 3/8" LL x 3/4" SL x 3/8" Insulated Line Set

Ensure efficient refrigerant flow and optimal HVAC performance with this 50-foot insulated line set. Designed for seamless connection between an outdoor condensing unit or heat pump and an indoor air handler or evaporator coil, this line set offers durability, flexibility, and superior thermal protection for long-lasting operation.

Key Features:

Premium Copper Tubing: 3/8" liquid line (LL) and 3/4" suction line (SL) for efficient refrigerant transfer.
Pre-Insulated for Efficiency: 3/8" thick insulation minimizes energy loss and condensation buildup.
Versatile Application: Compatible with heat pumps and conventional split systems.
Easy Installation: Flexible and durable copper tubing allows for smooth routing and connection.
Extended 50-Foot Length: Ideal for larger residential and light commercial HVAC installations.

Upgrade your HVAC system with this high-quality insulated line set, engineered for reliability, efficiency, and ease of installation.

30 Feet of 3/8" LL x 3/4" SL x 3/8" Insulated Line Set

Line sets are the copper lines which connect an outdoor condensing unit/heat pump to an inside air handler or evaporator coil. Line sets are available in different lengths and diameters to fit most applications.

More Information
Goodman 2 Ton 14.3 SEER2 Heat Pump Condenser - R32 Single Stage
SKUGLZS4BA2410
Weight (in lbs)165.000000
Brand/ManufacturerGoodman
ReplacesGSZ140241, GSZB402410
Product FeaturesNew Refrigerant Compliant
HSPF27.8
Cooling BTU24,000
Heating BTU24,000
Decibel Level (dBA)74
Horsepower1/6 HP
RefrigerantR32
SEER2 (Efficiency)14.3
Condenser StagesSingle Stage
Compressor TypeRotary
Liquid Line3/8"
Suction Line3/4"
Liquid Valve Size3/8"
Suction Valve Size3/4"
Electrical208/230v 1 Phase 60 Hz
Max Breaker Size15 Amps
Min. Breaker Size11.2 Amps
Tonnage2 Ton
ConnectionSweat
Height32 1/2"
Width29"
Depth29"
Warranty10 Years Parts Limited Warranty with Online Registration
Resources You will need Adobe® Acrobat® Reader to view PDF documents.
Safety InformationPROPOSITION 65 WARNING
2 Ton 17.5" Height Goodman Horizontal Cased Evaporator Coil - TXV - R32
SKUCHPTA2426B3
Weight (in lbs)55.000000
Brand/ManufacturerGoodman
Product FeaturesNew Refrigerant Compliant
ConfigurationHorizontal
RefrigerantR32
Liquid Line3/8"
Suction Line7/8"
Tonnage2 Ton
StyleA-Coil
CertificationETL Listed | AHRI Certified
Height17.5"
Width26"
Depth21"
Warranty10 Years Parts with Online Registration
Resources You will need Adobe® Acrobat® Reader to view PDF documents.
Safety InformationPROPOSITION 65 WARNING
Goodman 80% 60,000 BTU Variable Speed Modulating Gas Furnace - 17.5" Width - Upflow / Horizontal
SKUGMVC800604BN
Weight (in lbs)138.000000
AHRI Certificate Number204633301
Airflow DirectionUpflow/Horizontal
Exhaust Flue RequirementMetal
Brand/ManufacturerGoodman
Furnace Efficiency / AFUE 80%
Heating BTU60,000
Blower MotorVariable Speed
Maximum CFM1600
ConfigurationUpflow/Horizontal
Electrical120 V. 1 Phase 60 Hz
Burner StagesTwo
Fuel TypePropane, Natural Gas
Height34.5"
Width17.5"
Depth28.75"
Warranty10 Years with Online Registration
Resources You will need Adobe® Acrobat® Reader to view PDF documents.
Safety Information
This gas appliance requires a trained technician to install. Improperly connecting gas lines or improperly connecting a gas flue or venting may result in death. By purchasing this item, you are agreeing that you are using a trained technician to install this gas appliance. We will not be responsible for any injury or property damage arising from improper service or service procedures. Whoever installs or services this unit assumes responsibility for any personal injury or property damage which may result. Many jurisdictions require a license to install this equipment.

PROPOSITION 65 WARNING
Goodman Furnace Integration Kit - R32
SKU0230K00044
Weight (in lbs)0.150000
Length1.6"
Height9.2"
Width2.2"
Resources You will need Adobe® Acrobat® Reader to view PDF documents.
Safety InformationPROPOSITION 65 WARNING
Propane (LP) Conversion Kit for Goodman GR9T80 and GD9T80 Furnaces
SKULPM-32
Weight (in lbs)1.000000
Brand/ManufacturerGoodman
Safety InformationPROPOSITION 65 WARNING
Installation Kit for Condensers - Accessory Set
SKUMSK001
Weight (in lbs)15.000000
Brand/ManufacturerOnline Supply
Resources You will need Adobe® Acrobat® Reader to view PDF documents.
Safety InformationPROPOSITION 65 WARNING
E Lite Equipment Pad 32" x 32" x 3"
SKUEL3232-3
Weight (in lbs)20.000000
Brand/ManufacturerOnline Supply
Height3"
Width30"
Depth30"
Safety InformationPROPOSITION 65 WARNING
Wall Mount Bracket for Condensers 48"
SKUACB-48
Weight (in lbs)9.200000
Brand/ManufacturerOnline Supply
Length30"
Height16"
Width2"
Resources You will need Adobe® Acrobat® Reader to view PDF documents.
Safety InformationPROPOSITION 65 WARNING
Santa Fe Classic Dehumidifier - 110/120V - R410A (SKU 4044710)
SKUSA8109
Weight (in lbs)110.000000
Brand/ManufacturerSanta Fe
Additional InformationResidential Use: Basement, Crawl Space
Additional InformationManufacturer-Suggested Room Size: 3000 sq. ft.
Additional InformationCertifications: UL
Maximum CFM275 CFM
Decibel Level (dBA)60.8 dB
Square Foot3,000-3,499
Energy StarNo
RefrigerantR410A
Capacity116 pints
Wattage700 W
Max Breaker Size6.4 Amps
Height36"
Width20"
Depth17"
Pint Capacity100-150
UsageBasement, Crawl Space, Repair Shops/Garages
Additional InfoDrain Hose Diameter: 0.56"
Warranty5-Year Complete Warranty | 6-Year Component Warranty
Resources You will need Adobe® Acrobat® Reader to view PDF documents.
Safety InformationPROPOSITION 65 WARNING
Santa Fe UltraMD33 In-Wall Dehumidifier - 110/120V - R454B (SKU 4044610)
SKUUL7552
Weight (in lbs)40.000000
Brand/ManufacturerSanta Fe
Additional InformationResidential Use: Large Room, Living Space
Additional InformationManufacturer-Suggested Room Size: 1200 sq. ft.
Additional InformationCertifications: ETL
Maximum CFM155 CFM
Decibel Level (dBA)46 dB
Square Foot1,000-1,499
Energy StarYes
RefrigerantR454B
Capacity33 pints
Wattage305 W
Max Breaker Size5.9 Amps
Height30"
Width14.18"
Depth5.75"
Pint Capacity0-99
UsageIn Wall, Restaurants
Additional InfoDrain Hose Diameter: 0.75"
Warranty5-Year Complete Warranty | 6-Year Component Warranty
Resources You will need Adobe® Acrobat® Reader to view PDF documents.
Safety InformationPROPOSITION 65 WARNING
Santa Fe Ultra70 Whole House Dehumidifier - 110/120V - R454B (SKU 4044100)
SKUUL3684
Weight (in lbs)55.000000
Brand/ManufacturerSanta Fe
Additional InformationResidential Use: Whole House
Additional InformationManufacturer-Suggested Room Size: 1800 sq. ft
Additional InformationCertifications: CSA, UL
Maximum CFM150 CFM
Decibel Level (dBA)55.3 dB
Square Foot1,500-1,999
Energy StarNo
RefrigerantR454B
Capacity70 pints
Wattage580 W
Max Breaker Size5.1 Amps
Height12"
Width28"
Depth12"
Pint Capacity0-99
UsageDucted, Restaurants, Whole House
Additional InfoDrain Hose Diameter: 0.75"
Warranty5-Year Complete Warranty | 6-Year Component Warranty
Resources You will need Adobe® Acrobat® Reader to view PDF documents.
Safety InformationPROPOSITION 65 WARNING
ACiQ TL04-1 Smart Thermostat – 24V & HA/HB Compatible
SKUTL04-1
Weight (in lbs)0.700000
Brand/ManufacturerACiQ
Product FeaturesHeat Pump Capable, Programmable, WiFi, 1 Heat, 2 Heat, 3 Heat, 1 Cool, 2 Cool
Resources You will need Adobe® Acrobat® Reader to view PDF documents.
Safety InformationPROPOSITION 65 WARNING
Ecobee Smart WiFi Thermostat with Alexa
SKUEB-STATE6P-01
Weight (in lbs)0.500000
Brand/Manufacturerecobee
Product FeaturesProgrammable, WiFi, Heat Pump Capable, 3 Heat, 2 Cool
Energy StarYes
Warranty3 years
Resources
Safety InformationPROPOSITION 65 WARNING
ACiQ 7-Day Programmable Thermostat with WiFi
SKUSTN855W
Weight (in lbs)1.000000
Brand/ManufacturerACiQ
Resources You will need Adobe® Acrobat® Reader to view PDF documents.
Safety InformationPROPOSITION 65 WARNING
ACiQ Single-Stage Dual Powered Non-Programmable Thermostat
SKUSTN701
Weight (in lbs)1.000000
Brand/ManufacturerACiQ
Product FeaturesHeat Pump Capable, Non Programmable, 1 Heat, 1 Cool
ResourcesBraeburn Brochure
Braeburn User Guide
Safety InformationPROPOSITION 65 WARNING
50 Feet of 3/8" LL x 3/4" SL x 3/8" Insulated Line Set
SKULS38343850
Weight (in lbs)22.000000
Brand/ManufacturerOnline Supply
Liquid Line3/8"
Suction Line3/4"
Suction Line Insulation Thickness3/4"
Length50 feet
Safety InformationPROPOSITION 65 WARNING
30 Feet of 3/8" LL x 3/4" SL x 3/8" Insulated Line Set
SKULS38343830
Weight (in lbs)35.000000
Brand/ManufacturerOnline Supply
Liquid Line3/8"
Suction Line3/4"
Suction Line Insulation Thickness3/4"
Length30 feet
Write Your Own Review
You're reviewing:2 Ton 15.2 SEER2 80% AFUE 60,000 BTU Goodman Gas Furnace and R32 Heat Pump System - Horizontal
Your Rating
Customer Questions
No Questions
Did you find what you were looking for?
Why Choose a Goodman Product?
Why Choose Goodman?

For over three decades Goodman has concentrated on something more important than simple brand recognition consumer advertising. They focus on the design, engineering, and manufacturing of dependable products that have helped millions and millions of homeowners achieve reliable, high-quality, and affordable indoor comfort. In addition, Goodman has earned the loyalty and respect from thousands of local independent heating and cooling professionals across North America.