Trane 3.5 Ton 14.3 SEER2 96% 80,000 BTU Furnace & AC System - R454B Upflow - RunTru by Trane

OVERVIEW

The RunTru by Trane A5AC4042A1 is a standard AC-only condenser. Designed with comfort in mind and an inexpensive but higher-than-standard efficiency option for nearly any application, this condenser is considered a good all-around option for almost any application.

QUICK FACTS

• 3.5 ton, 14.3 SEER2 AC-only condenser
• Proudly Made in the USA: High-quality HVAC equipment crafted with precision and reliability
• Can cool up to a medium size house in average conditions
• Single stage compressor

3.5 Tons

The RunTru by Trane A5AC4042A1 air conditioner condenser has an output of 3.5 tons, generally enough to cool up to a medium size house in ideal climates. In many system configurations, the tonnage of the unit's paired coil or air handler will be larger in tonnage than this condenser, which maintains the efficiency of the unit. Please note that this condenser cannot function or provide any sort of heating on its own, and it needs an indoor coil or air handler to work. If you have any questions, please contact us.

14.3 SEER2

The RunTru by Trane A5AC4042A1 air conditioner condenser is rated at 14.3 SEER2, making it between 5-7% more efficient than 13.4 SEER2 units, saving you money in electric bills over the entire lifetime of your unit.

Warranty

RunTru by Trane offers a 10 year compressor, outdoor coil, and parts warranty on this condenser. For these warranties to be upheld, the unit must be installed following your state and local codes, a new and certified evaporator coil must be installed at the same time, and the entire system must be registered online through the manufacturer.

Durability

The cabinet of RunTru by Trane units are extremely durable. On the A5AC4042A1, there are reinforced corner posts and the internals of the unit are protected by an additional inlet grille, all to provide enhanced protection to the unit.

Disclaimer: This condenser contains R454B refrigerant, which is classified as an A2L refrigerant. To comply with safety standards, this unit must be paired with an R454B air handler or evaporator coil equipped with a leakage detection system. Failure to comply with these requirements may result in safety hazards and could void the warranty. Please call us at 1-888-557-9206 if you have any questions.

OVERVIEW

RunTru by Trane takes pride in its ability to provide a high-quality system, including all system components. Leaving no exception, the 5MXCC009AC6HCA multi-positional coil is a superior option for almost any application while maintaining the entire unit's efficiency with a factory-integrated flow control check valve for enhanced energy optimization. With its unique performance features along with its ability to be applied in any orientation, this coil is a superior option for your home's comfort.

QUICK FACTS

• 3 - 5 ton multi-positional evaporator coil
• Proudly Made in the USA: High-quality HVAC equipment crafted with precision and reliability
• Works in almost any upflow, downflow, or horizontal system setup
• Compatible with both AC-only and heat pump condensers
• Sturdy and compact design

3 - 5 Tons

The RunTru by Trane 5MXCC009AC6HCA is rated for 3 to 5 tons of heating and cooling. With its ability to be installed with either an AC-only condenser or a heat pump condenser, this unit is ideal for many applications. In some packages, this coil will be larger than its paired condenser, which will increase the overall efficiency of the entire unit, but the coil should never be smaller than its paired condenser. Please note that this item cannot operate independently from a compatible condenser and blower or furnace, each available at an additional cost.

Warranty

RunTru by Trane offers a 10 year parts warranty on their coils when they are installed following your state and local codes, as well as the system is paired with a certified system matchup. Please note that in order to obtain the entire length of this warranty, the entire unit must be registered through the manufacturer.

OVERVIEW

The RunTru by Trane A952V080CU5SB is an inexpensive model of furnace to provide reasonable comfort to your home. At a basic efficiency, this furnace will heat your home adequately with the right output, providing comfort to your home even in the coldest parts of the year.

QUICK FACTS

• 80,000 BTU, 95% AFUE natural gas furnace
• Proudly Made in the USA: High-quality HVAC equipment crafted with precision and reliability
• Generally suitable for up to a medium house in ideal applications
• Upflow configuration
• Two stage burner with a variable speed blower
• Field-convertible to propane with an optional LP kit
• On board self-diagnostics

80,000 BTU

The RunTru by Trane A952V080CU5SB has an input of 80,000 BTU. The output of the unit, determined by the input times the efficiency, is 76,000 BTU. This output makes this furnace suitable for most medium-sized houses in average climate conditions.

95% AFUE

With one of the highest efficiency ratings available, the RunTru by Trane A952V080CU5SB is 95% efficient. The 95% AFUE also means that for the gas going into the furnace, 95% of it is used to heat your home while the remaining 5% is lost out the flue piping and lost to normal furnace operations. All 90% or higher furnaces require plastic/PVC venting, and if you need it to be metal venting a furnace with an efficiency of 80% is required. While this unit uses natural gas as fuel out of the box, we also have an LP conversion kit, available at an additional cost.

Warranty

RunTru by Trane offers 10 year parts and 20 year heat exchanger limited warranties. Please note that in order for the heat exchanger and parts warranties to be upheld, the unit must be registered through the manufacturer within 90 days of installation. The installation must also follow your state and local codes.

Installation and Durability

The A952V080CU5SB is configured for upflow installations. The unit has a durable outer casing that can withstand wear-and-tear through its entire lifetime, providing the peace of mind that your home will stay comfortable year-round.

OVERVIEW

The Santa Fe Ultra70 was the first compact whole house ventilating dehumidifier built for tight, low-clearance installs. It removes up to 70 pints of moisture per day and covers homes up to 1,800 square feet, which makes it a strong match for smaller houses, condos, and apartments.

Ducted into your HVAC system, the Ultra70 controls humidity everywhere at once instead of one room at a time. That means no musty basement smell, no clammy upstairs bedrooms, and no conditions that let mold and wood rot get started.

The cabinet measures 12" W x 12" H x 28" L and converts between horizontal and vertical airflow discharge, so it works in mechanical rooms, closets, attics, basements, and crawl spaces alike. Now running R454B refrigerant, it exceeds Department of Energy efficiency standards and is built at Santa Fe's headquarters in Madison, Wisconsin.

Key Features:

• 70 Pints Per Day – Whole-home moisture control for spaces up to 1,800 sq. ft.
• Optional Fresh Air Ventilation – Duct outdoor air in to dilute indoor pollutants
• MERV-13 Filtration – Standard filter captures fine airborne particles
• Convertible Discharge – Rotate the panel for horizontal or vertical airflow
• Compact 12" x 12" x 28" Cabinet – Fits where standard units can't
• R454B Refrigerant – Exceeds DOE efficiency standards
• 115V / 5.4 Amps – Plugs into a standard grounded outlet
• Made in Madison, Wisconsin – Heavy-duty steel construction

Customized Installation and Operation

The Ultra70 gives you three ways to install it. Tie it into your existing HVAC system with a dedicated 8" return and a supply connection with backdraft damper. Run it on its own separate ductwork. Or set it freestanding in a basement or crawl space when ducting isn't practical.

Both the return air inlet and supply air outlet use 8" duct collars. The back panel comes configured for horizontal flow through and rotates for vertical flow through with a T20 torx bit, which is what lets the same unit work in an attic, a closet, or under a floor.

Fresh air ventilation is optional and simple to add. A "T" into the inlet duct brings outdoor air into the system to dilute pollutants and maintain normal oxygen levels indoors, and the volume is adjustable with a range of dampers and controls.

• HVAC Integration – Dedicated return plus ducted supply to the air handler
• Dedicated Ducting – Runs on its own duct system independent of HVAC
• Freestanding Operation – Works standalone in basements and crawl spaces
• Optional Outdoor Air – Ventilation duct T's into the inlet, regulated by dampers and controls
• Continuous Drain – Gravity drainage, no manual emptying

Warranty Information

Santa Fe warrants the Ultra70 Dehumidifier to be free from defects in materials and workmanship. The unit includes a 5-year limited warranty, with extended coverage on select components. Warranty coverage may vary based on installation, application, and registration requirements. Refer to the manufacturer’s documentation for complete warranty details.