3 Ton 15.5 SEER 96% AFUE 40,000 BTU Goodman Furnace and Air Conditioner System - Horizontal

OVERVIEW

The Goodman CHPF3642C6 evaporator coil is designed for any installations that the coil needs to sit on its side, in the horizontal position. With its enhanced comfort and superior efficiency design, the CHPF3642C6 is an inexpensive yet quality choice for you.

QUICK FACTS

• 3 to 3.5 ton evaporator coil
• Installable in the horizontal configuration
• Usable with either a heat pump or an AC-only condenser
• Works with R410A or R22 refrigerant
• Low air leakage
• Check flowrater expansion device for use in any application

3 to 3.5 Tons

At an output of 3 to 3.5 tons, the Goodman CHPF3642C6 evaporator coil is ready for almost any horizontal installation at that size. In many situations, a condenser that is paired with the condenser is going to be smaller than this coil. This is intentional and is to maintain the overall unit’s efficiency.
Please note that for this coil to function, a furnace or blower and a condenser is required, all sold separately. This coil is not designed to replace a coil in a single-piece air handler.

Warranty

The CHPF3642C6 coil is covered under Goodman’s standard 10 year parts warranty when the unit is installed following your state and local codes, the coil is paired with a compatible R410A condenser, and the entire system is registered online through the manufacturer.

The Goodman CHPF3642C6 evaporator coil is designed with a durable outer casing and a rust-resistant drain pan to lower general wear and tear to make sure the coil works for years to come. To ease installation, the unit is designed to be slim and able to fit in many crawl spaces and attics, and with its foil-face insulation making the unit’s air leakage minimal, installation location does not necessarily have to be insulated for normal temperature operations. For maintenance, the coil has a split-seam on the front of it for easier access.

OVERVIEW

With top of the line technology at high efficiency, two stage burner, and variable speed blower motor, the GCVC960403BN is another high-end gas furnace manufactured by Goodman. With enhanced durability and reliability, you can expect this Goodman gas furnace to perform well throughout its life to provide consistent comfort and lower the overall cost of bills to keep money in your pocket for many years to come.

QUICK FACTS

• This furnace is ideal to heat a smaller house (in average climate conditions)
• 40,000 BTU 96% AFUE two stage variable speed natural gas furnace
• Requires plastic/PVC flue venting
• Can be used in the downflow or horizontal orientation
• Can be converted to propane with an LP conversion kit (sold separately)
• Innovative design for electrical efficiency, safety, and lower sound output

40,000 BTU

The GCVC960403BN Goodman gas furnace has an input of 40,000 BTU’s. The output of the unit is 38,400 BTU’s (input X efficiency = output). This size of furnace is normally suitable for most smaller houses in an ideal climate.

96% AFUE

With one of the highest efficiency ratings available, the GCVC960403BN gas furnace is 96% efficient. At this efficiency, the GCVC960403BN uses only 4% of its gas to operate the furnace itself and 96% of the gas going into the furnace to make your home warm and comfortable. With all gas furnaces at 90% efficiency and above like this one, the flue venting must be plastic or PVC.

Allowing for a more precise air flow output to best suit your home’s needs, the motor on the GCVC960403BN is a variable speed ECM blower motor, the best blower motor that Goodman offers to date. The two stage burner on the furnace allows for a lower output and a higher output for a more precise heat output as needed by your thermostat. Both of these high-end features allow for a small increase in efficiency, but the primary benefits are enhanced comfort and a more stable temperature throughout any season of the furnace’s use.

The GCVC960403BN comes standard with Goodman’s 10 year parts warranty and its exceptional lifetime heat exchanger warranty. In order to maintain this warranty, the installation must follow your state and local codes and the unit must be registered online via Goodman’s website.

The heavy-duty heat exchanger on the Goodman GCVC960403BN gas furnace is designed for constant use to provide enhanced reliability. The aluminized steel structure of this heat exchanger allows for a faster and more efficient heat transfer rate. Moreover, the outer casing on the unit is a heavier gauge of steel, protecting the internals of the furnace and lowering air leakage and furnace operation noise. All of these features enhance comfort and provide durability and reliability for the lifetime of the unit.

The GCVC960403BN furnace runs on natural gas from the factory. When you field-install the optional LP conversion kit (found here at an additional cost), this furnace can use propane instead when the installation requires it. This Goodman furnace is also able to be installed in the downflow or horizontal positions, allowing for a more versatile application potential.