Goodman 1.5 Ton 80% AFUE 40,000 BTU Furnace and Coil System - Upflow - R32

Goodman 40,000 BTU 80% AFUE Upflow/Horizontal Gas Furnace

Reliable Gas Heating with Everyday Efficiency

When winter temperatures arrive, this Goodman gas furnace delivers dependable whole-home heating with practical efficiency and durable performance. Designed with modern blower and reliable gas burner technology, as well as installation options for compatible applications, it provides a strong heating solution for residential use.

Key Benefits

• 40,000 BTU Heating Capacity – Perfect for 600–1,000 sq. ft. homes in various climates when properly sized and installed.
• 80% AFUE Efficiency – Converts approximately 80% of fuel consumed into usable heat for your home.
• 9-Speed ECM Blower Motor – Uses less electricity than older PSC motors while supporting improved airflow and circulation.
• Upflow/Horizontal Installation – Designed for upflow/horizontal applications to fit compatible installation layouts.
• 14" Cabinet Width – Designed to fit evaporator coils of a matching width.
• Convertible to Liquid Propane – Can be field-converted to use liquid propane with an optional conversion kit.
• Quiet, Durable Operation – Heavy-gauge steel cabinet and insulated design help reduce sound while protecting internal components.
• Strong Warranty Coverage – Backed by Goodman limited warranty coverage when properly installed and registered online.

Heating Capacity and AFUE Guidance

This furnace is perfect for 600–1,000 sq. ft. homes in various climates when properly sized and installed. With a 40,000 BTU input rating and 80% AFUE efficiency, it is designed to provide dependable heating for compatible residential applications. Proper furnace sizing should always be confirmed through a professional load calculation based on climate, insulation, windows, ceiling height, layout, air leakage, and other home-specific factors.

Efficient Everyday Heating Performance

An 80% AFUE furnace provides dependable gas heating performance for compatible residential applications. For example, a 40,000 BTU input rating at 80% AFUE provides approximately 32,000 BTUs of usable heating output, while the remaining heat is lost to the combustion process and exits through the venting. Because this is an 80% AFUE furnace, it requires metal flue venting. Homes with plastic or PVC furnace venting require a 90% AFUE or higher furnace.

Advanced Airflow with a 9-Speed ECM Blower

The integrated 9-speed ECM blower motor provides improved electrical efficiency compared to older PSC blower designs. This blower helps support consistent air circulation throughout the home while reducing electrical consumption during operation.

Built for Long-Term Reliability

A heavy-gauge steel cabinet, durable hot surface igniter, self-diagnostic control board, and Goodman’s proven heat exchanger design work together to support long-term performance. The self-diagnostic controls simplify troubleshooting and service, while the insulated cabinet helps reduce operating noise.

Warranty

When installed according to applicable codes and registered online with Goodman, this furnace includes:

• 10-Year Parts Limited Warranty
• Lifetime Heat Exchanger Limited Warranty

Warranty coverage requires proper installation and online registration. Installation by a qualified HVAC professional is recommended to maintain warranty eligibility.

What’s Included

• Goodman gas furnace

Recommended Accessories

• Wall-Mounted Thermostat – Provides compatible temperature control for the furnace and connected HVAC system.
• Propane Conversion Kit – Converts the furnace from natural gas to liquid propane when propane operation is required.
• Return Air Package – Provides return air components for a cleaner installation setup.
• Supply Plenum – Creates a proper supply air transition above the furnace.

Requirements, Considerations & Required Notices

• Professional Installation Required – This gas furnace should be installed and serviced by a trained HVAC technician in accordance with local codes and manufacturer requirements.
• Metal Flue Venting Required – This 80% AFUE furnace requires metal venting materials. Homes with plastic or PVC furnace venting require a 90% AFUE or higher furnace.
• Electrical Requirements – Requires 115-volt, single-phase power and proper circuit protection.
• Cabinet Width – Confirm the 14" cabinet width fits the available installation space and matched indoor equipment.
• Fuel Compatibility – Ships configured for natural gas operation. Liquid propane conversion requires the appropriate optional conversion kit.
• Installation Configuration – Designed for upflow/horizontal installations when installed according to manufacturer guidelines.

NOx Regulation Notice

Please note that this furnace does not comply with Low NOx or Ultra-Low NOx regulations. If you have any questions, please contact us.

This furnace cannot be installed in Colorado or the following counties in California: Fresno, San Joaquin, Kern, Kings, Los Angeles, Madera, Merced, Orange, Riverside, San Bernardino, Stanislaus, Yolo, Tulare, San Diego, Ventura, Santa Barbara, San Luis Obsipo, Santa Clara, San Mateo, Alameda, Contra Costa, Marin, Sonoma, and Napa. In these areas you are required to purchase a Low NOx or Ultra-Low NOx furnace. If you have any questions, please contact us.

Built for Compatible Condenser and Furnace Setups

This Goodman cased evaporator coil is designed to work with compatible R32 condensers and furnaces. With a 1.5 ton capacity, 14" cabinet width, upflow/downflow installation flexibility, and Goodman’s AlumaFin7™ coil design, it helps support proper equipment matching for approved split HVAC applications.

Key Benefits

• Indoor Coil for Split HVAC Setups – Works with compatible condensers and furnaces to support system performance.
• 1.5 Ton Capacity – Designed for approved equipment matches where the coil capacity is equal to or greater than the condenser capacity.
• 14" Cabinet Width – Helps ensure the coil fits properly with compatible furnace cabinets and installation spaces.
• Upflow/Downflow Installation – Supports installation flexibility for compatible vertical applications.
• Goodman AlumaFin7™ Coil Design – Features an all-aluminum coil design with grooved aluminum tubing to help increase surface area for efficient heat transfer performance.
• Factory-Installed Flowrater – Includes a piston-style metering device for approved matched applications.
• R32 Compatible – Designed for use with compatible R32 refrigerant equipment.

Matched for Condenser and Furnace Compatibility

Proper coil matching is important for system performance, fit, and installation. This coil’s 1.5 ton capacity helps match it to compatible condenser applications, while the 14" cabinet width helps determine whether it will fit correctly with the furnace and available installation space.

Built with Goodman AlumaFin7™ Coil Design

Goodman’s AlumaFin7™ coil design features all-aluminum construction and grooved aluminum tubing to help increase surface area for heat transfer. This design supports efficient system operation while providing a durable indoor coil option for compatible R32 equipment.

How the Indoor Coil Supports Your System

The indoor coil is part of the refrigerant circuit and helps transfer heat as air moves across the coil. In a properly matched system, it works with the condenser, furnace blower, and refrigerant flow controls to support reliable home comfort.

Warranty

When installed according to applicable codes and registered online with Goodman, this evaporator coil includes:

• 10-Year Parts Limited Warranty

Warranty coverage requires proper installation and online registration. Installation by a qualified HVAC professional is recommended to maintain warranty eligibility.

What’s Included

• Goodman cased evaporator coil
• Factory-installed flowrater/piston metering device

Recommended Equipment Options

• Compatible Condenser – Used with the coil as part of a compatible split HVAC setup.
• Compatible Gas Furnace – Provides the indoor airflow needed to move air across the coil in compatible applications.

Requirements & Considerations

• Compatible Condenser Match – This coil must be paired with compatible outdoor equipment designed for the correct refrigerant type and approved equipment match.
• Coil Tonnage – Coil capacity should be equal to or greater than the condenser capacity. Do not pair a coil with a condenser that exceeds the coil’s rated capacity.
• Furnace Cabinet Width – Confirm the 14" coil cabinet width is compatible with the furnace and available installation space.
• Replacement Planning – When replacing a coil, review whether the condenser, furnace, or overall equipment setup should also be updated.
• Refrigerant Compatibility – Use with compatible R32 equipment and installation requirements.
• Installation Orientation – Confirm the upflow/downflow coil orientation matches the installation application before purchase.
• Professional Installation Recommended – Proper installation by a certified HVAC installer is important for safe operation and warranty coverage.

R32 Refrigerant Compatibility Notice

Disclaimer: This evaporator coil is designed for use with R32 refrigerant systems, classified as an A2L refrigerant. R32 systems must be installed with compatible equipment and any required refrigerant leak detection components according to the product specifications, installation manual, and applicable safety standards. Failure to follow these requirements may result in safety hazards and could void the warranty. Please call us at 1-888-912-1827 if you have any questions.