1-800-397-1392
Today's Hours 8am - 9pm est
AHRI Number:10332314
The Goodman GMVC80 furnace features a two-stage burner with a variable blower motor. This furnace can be installed in both upflow and horizontal configurations and features an aluminized-steel tubular heat exchanger and durable Silicon Nitride Hot Surface Ignition system.
The Goodman GSXC180241 18 SEER Air Conditioner uses the chlorine-free refrigerant R-410A and features energy efficiencies and operating sound levels that are among the best in the heating and cooling industry. The GSXC180241 contains the two stage, high efficiency Copeland UltraTech scroll compressor, which provides improved temperature and humidity control. This unit is designed for the consumer who desires superb comfort and quiet operation.
The Goodman CHPF Cased Indoor Air Conditioner Evaporator Coil is made for use with split-system air conditioning and Evaporator systems. The Goodman Air Conditioning and Heating Company has become one of the largest manufacturers of residential and light commercial air conditioning, heating, and indoor air quality products and systems by focusing on just one thing, building the most reliable and refreshingly affordable indoor comfort products in the market.
The GMVC80604BN gas furnace is from one of the top-of-the-line series by Goodman. Considered one of the best of the best, this furnace has a two stage burner and a variable speed blower motor. With the best durability and reliability that Goodman 80% efficient furnaces have to offer, we are proud to offer you the Goodman GMVC80604BN gas furnace.
At an input of 60,000 BTU’s, the GMVC80604BN Goodman gas furnace is suitable for up to a medium-sized house in an average climate. The output of this furnace is 48,000 BTU’s, which is calculated by the input times the 80% efficiency rating.
With the industry standard efficiency of 80% AFUE, the GMVC80604BN Goodman gas furnace uses 80% of the fuel going into the furnace to heat your home and the remaining 20% of the fuel going into it is used up in normal furnace operations and is lost out of the flue venting. The GMVC80604BN requires metal flue venting like any 80% efficient furnace, while anything 90% and above would require plastic or PVC venting.
Please note that this furnace does not comply with California Low NOx or Ultra-Low NOx regulations. If you have any questions, please contact us.
The GMVC80604BN is equipped with two stages, allowing for an adjusted heat output to better suit your home’s comfort needs. The integrated variable speed blower on the furnace allows for an exact airflow output based on the requirements for your home as calculated by the control board and thermostat, keeping your home at a more constant temperature and increasing efficiency overall.
The GMVC80604BN comes standard with Goodman’s 10 year parts warranty and its phenomenal lifetime heat exchanger warranty. In order to maintain this warranty, the installation must follow your state and local codes and the unit must be registered online through the manufacturer.
The tubular heat exchanger on the GMVC80604BN is heavy-duty for constant use in the winter. Made of aluminized steel, Goodman heat exchangers provide fast and efficient heat transfer rates, all the while increasing the furnace’s dependability and reliability. The heavy-duty exterior of the unit protects all of the unit’s internal mechanisms and the secure cabinet lowers air leakage and sound output in comparison to its competitors, all providing enhanced comfort that lasts a long time.
The GMVC80604BN furnace runs natively on natural gas. When you use Goodman’s associated LP conversion kit (found here at an additional cost), this furnace can use propane instead when the installation calls for it. This Goodman furnace is also able to be installed in the upflow or horizontal positions, allowing for a broader application potential.
The Goodman CHPF3642C6 evaporator coil is designed for any installations that the coil needs to sit on its side, in the horizontal position. With its enhanced comfort and superior efficiency design, the CHPF3642C6 is an inexpensive yet quality choice for you.
At an output of 3 to 3.5 tons, the Goodman CHPF3642C6 evaporator coil is ready for almost any horizontal installation at that size. In many situations, a condenser that is paired with the condenser is going to be smaller than this coil. This is intentional and is to maintain the overall unit’s efficiency. Please note that for this coil to function, a furnace or blower and a condenser is required, all sold separately. This coil is not designed to replace a coil in a single-piece air handler.
The CHPF3642C6 coil is covered under Goodman’s standard 10 year parts warranty when the unit is installed following your state and local codes, the coil is paired with a compatible R410A condenser, and the entire system is registered online through the manufacturer.
The Goodman CHPF3642C6 evaporator coil is designed with a durable outer casing and a rust-resistant drain pan to lower general wear and tear to make sure the coil works for years to come. To ease installation, the unit is designed to be slim and able to fit in many crawl spaces and attics, and with its foil-face insulation making the unit’s air leakage minimal, installation location does not necessarily have to be insulated for normal temperature operations. For maintenance, the coil has a split-seam on the front of it for easier access.
Goodman's TXV valves are designed to improve the reliability and efficiency of your central split system. With the TX2N4A, you can be assured that your one-and-a-half or two ton system is getting the proper refrigerant flow, even through changing conditions. Since this valve is installed externally, it is easy to service and maintain. If you're looking to improve the efficiency and performance of your system, the TX2N4A is a good start.
Please note that this is not an exhaustive list. Use Ctrl+F to simplify your search. This part is compatible with the following models:
GSX130181 GSX130241 DSXC160241 GSZ130181 GSZ130241 SSZ140181 SSZ140241 SSZ160241 DSZC160241 CAPF1824*6 CAUF1824*6 CHPF1824A6 CSCF1824N6
Line sets are the copper lines which connect an outdoor condensing unit/heat pump to an inside air handler or evaporator coil. Line sets are available in different lengths and diameters to fit most applications.
Line sets are the copper lines which connect an outdoor condensing unit/heat pump to an inside air handler or evaporator coil. Linesets are available in different lengths and diameters to fit most applications.
60,000 BTU 80% AFUE Variable Speed Goodman Gas Furnace - Upflow/Horizontal | |
---|---|
SKU | GMVC800604BN |
Weight (in lbs) | 138.000000 |
AHRI Certificate Number | 204633301 |
Airflow Direction | Upflow/Horizontal |
Exhaust Flue Requirement | Metal |
Brand/Manufacturer | Goodman |
Furnace Efficiency / AFUE | 80% |
Heating BTU | 60,000 |
Blower Motor | Variable Speed |
Maximum CFM | 1600 |
Configuration | Upflow/Horizontal |
Electrical | 120 V. 1 Phase 60 Hz |
Burner Stages | Two |
Fuel Type | Propane, Natural Gas |
Height | 34.5" |
Width | 17.5" |
Depth | 28.75" |
Warranty | 10 Years with Online Registration |
Resources | You will need Adobe® Acrobat® Reader to view PDF documents. |
Safety Information |
This gas appliance requires a trained technician to install. Improperly connecting gas lines or improperly connecting a gas flue or venting may result in death. By purchasing this item, you are agreeing that you are using a trained technician to install this gas appliance. We will not be responsible for any injury or property damage arising from improper service or service procedures. Whoever installs or services this unit assumes responsibility for any personal injury or property damage which may result. Many jurisdictions require a license to install this equipment.
PROPOSITION 65 WARNING |
3 to 3.5 Ton 21" Goodman Horizontal Evaporator Cased Coil | |
SKU | CHPF3642C6 |
Weight (in lbs) | 63.000000 |
Brand/Manufacturer | Goodman |
Configuration | Horizontal |
Refrigerant | R410A or R22 |
Liquid Line | 3/8" |
Suction Line | 7/8" |
Tonnage | 3.5 Ton |
Style | A-Coil |
Height | 21" |
Width | 21.125" |
Depth | 26" |
Warranty | 10 Years with Online Registration |
Resources | You will need Adobe® Acrobat® Reader to view PDF documents. |
Safety Information | PROPOSITION 65 WARNING |
Goodman 1.5 to 2 Ton TXV Kit - R-410A | |
SKU | TX2N4A |
Weight (in lbs) | 2.500000 |
Brand/Manufacturer | Goodman |
Refrigerant | R410A |
Safety Information | PROPOSITION 65 WARNING |
30 Feet of 3/8" LL x 3/4" SL x 3/8" Insulated Line Set | |
SKU | LS38343830 |
Weight (in lbs) | 35.000000 |
Brand/Manufacturer | Online Supply |
Liquid Line | 3/8" |
Suction Line | 3/4" |
Suction Line Insulation Thickness | 3/4" |
Length | 30 feet |
50 Feet of 3/8" LL x 3/4" SL x 3/8" Insulated Line Set | |
SKU | LS38343850 |
Weight (in lbs) | 22.000000 |
Brand/Manufacturer | Online Supply |
Liquid Line | 3/8" |
Suction Line | 3/4" |
Suction Line Insulation Thickness | 3/4" |
Length | 50 feet |
Safety Information | PROPOSITION 65 WARNING |