Osburn 2700 Matrix EPA Certified Wood Burning Fireplace Insert with Blower - Heats 2,200 Sq Ft.

SAVE $100.00
Customer reviews
Rating:
5 out of 5
In Stock - Ready to Ship
Free Shipping
By

Osburn

In stock
Model

Osburn OB02700

ID

82778

Was $4,199.00 Your Low Price Special Price $4,099.00
 
Use Code: break250
Save $250 OFF orders over $1,899
Coupon code copied!
  • Capable of Heating Up To 2,200 Square Feet
  • Easily Handles up to 20" Logs
  • Meets EPA 2020 Standards For Efficiency
  • Includes A Blower Kit
  • Reliable Heat During Power Outages
  • Minimum Fireplace Dimensions: 31 3/4"W x 27 1/8"H x 22 1/8"D
  • Expansive 2.5 Cubic Foot Firebox
  • High Efficient Non-Catalytic Design

2700 Matrix EPA Certified Wood Burning Fireplace Insert with Blower for Cleaner Wood Heat, Improved Fireplace Performance, and Dependable Backup Comfort

Osburn 2700 Matrix EPA Certified Wood Burning Fireplace Insert with Blower - OB02700 - Heats 2,200 Sq Ft. converts an existing fireplace opening into a practical source of steady wood-fired warmth. It suits homeowners seeking cleaner combustion, useful heating coverage, and dependable comfort when electrical service is unavailable.

Key Benefits

  • Efficiently Heat Your Home – Turns an existing fireplace into an effective heat source for the surrounding living area.
  • Air-Tight Design With Ceramic Glass – Accommodates practical firewood sizes while helping each load burn steadily and remain easy to manage.
  • Get More Heat From Less Firewood – Cleaner combustion helps homeowners capture more useful warmth from every load of seasoned firewood.
  • Includes A Blower Kit – The appropriate airflow setup moves heat beyond the hearth for more consistent room comfort.
  • An Excellent Back-Up Heat Source – Useful wood heat remains available when outages interrupt the home’s primary heating equipment.
  • Save On Utility Costs – Targeted room heating reduces unnecessary energy use in unoccupied areas of the home.
  • Enjoy Longer Burn Times – Extended burn cycles reduce frequent reloads and routine fire tending throughout the day.
  • Clean-Burning Design – Cleaner combustion produces useful warmth with less smoke, ash, and wasted firewood.

Efficiently Heat Your Home

Turns an existing fireplace into an effective heat source for the surrounding living area. This makes daily operation easier while supporting dependable comfort throughout the surrounding room.

Air-Tight Design With Ceramic Glass

Accommodates practical firewood sizes while helping each load burn steadily and remain easy to manage. It supports easier operation and dependable household comfort during everyday use.

Includes A Blower Kit

The appropriate airflow setup moves heat beyond the hearth for more consistent room comfort. This makes daily operation easier while supporting dependable comfort throughout the surrounding room.

Clean-Burning Design

Cleaner combustion produces useful warmth with less smoke, ash, and wasted firewood. It also supports practical operation, dependable performance, and comfortable everyday use throughout the home.

Warranty

Manufacturer warranty coverage may apply. Review the current warranty documentation for covered components, registration requirements, exclusions, and claim terms.

What's Included

  • Osburn 2700 Matrix EPA Certified Wood Burning Fireplace Insert with Blower - Heats 2,200 Sq Ft.

See How a Wood Insert Can Improve Fireplace Performance and Everyday Home Comfort

See how this wood insert can provide practical heating, efficient firewood use, and dependable backup warmth.

More Information
Osburn 2700 Matrix EPA Certified Wood Burning Fireplace Insert with Blower - Heats 2,200 Sq Ft.
FeatureSpec
SKUOsburn OB02700
Weight (in lbs)535
Brand/ManufacturerOsburn
UPC689526880916
Heating BTU80,000
Flue Outlet6" Diameter | Top
Square Footage750 - 2,200
Electrical120V (Included Blower)
Amperage RequirementLess Than 5 Amps
MaterialSteel
TypeBrick & Stone Fireplace Insert
Ignition TypeMatch Light
Fuel TypeWood
CertificationEPA, UL 1482, UL 735
Size Range30" - 39" Wide
Area Heated2000 - 2499 Sq. Ft
Fireplace StyleTraditional
Viewing Area24 3/8"W x 12 5/8"H
Minimum Fireplace Dimensions31 3/4"W x 27 1/8"H x 22 1/8"D
Max Log Length20"
WarrantyLimited Lifetime
Resources
Safety InformationPROPOSITION 65 WARNING
Top reviews
  1. Will buy here again
    Price
    100%
    Service
    100%
    Quality
    100%
    Great experience with both orders

    Will buy here again

    Review by

    Posted on

Customer Questions
What square footage will this heat?
This fireplace insert will heat approximately 500-2200 Square Feet. If you have any further questions, please call us and we will be happy to assist you.
Is all the required installation kit included in the price?
The installation kit is not included in this price. Please refer to the "Accessories" section on the product page that offer the 2 chimney liner kits that are available for this wood burning insert. If you have any further questions, please call, email or chat with us.
Can I use the existing flu from my existing fireplace?
You will need to verify that your current flue is an acceptable diameter and have a chimney inspection to verify the condition before installation. For additional details, please see the manual. If you have any further questions please feel free to give us a call! Thanks.
My chimney is deteriorating but intact, am I able to get insert?
Great question. Prior to installation, it is highly recommended that your chimney be fully inspected by a professional installer. Per the manufacturers installation manual: "Fireplace and Chimney Condition The masonry fireplace and chimney should be inspected prior to installation, to confirm that they are free from cracks, loose mortar, creosote deposits, blockage, or other signs of deterioration. If evidence of deterioration is noted, the fireplace or chimney should be upgraded and cleaned prior to installation."Installation Manual.If you are in need of a professional installation company, we recommend Thumbtack,it is a great resource to find a contractor. A lot of our customers and employees have had great luck with finding a contractor through them. Helpful tip: Call smaller companies. The larger companies will not take labor only jobs. If you have any further questions or need further assistance, please feel free to reach out to one of our experienced customer service representative...
What size wood insert is right for my home?
Choosing the right size wood insert depends on both your heating needs and the dimensions of your existing fireplace. Be sure to measure your fireplace’s width, height, and depth, then compare those to the minimum fireplace dimensions listed on each product page to ensure a proper fit. Generally, small inserts heat up to 1,500 sq. ft., medium inserts cover up to 2,500 sq. ft., and large inserts can heat areas larger than 2,500 sq. ft., though actual performance varies based on factors like firewood type, room layout, ceiling height, and insulation.
Do I need a chimney liner for my wood stove or fireplace insert?
A stainless steel chimney liner kit is always recommended when installing a wood-burning fireplace insert or freestanding stove in a masonry chimney. The liner ensures a consistent and safe flow of exhaust gases, improving the draft and overall efficiency of your appliance while protecting your chimney from heat and corrosion. Using a chimney liner helps maintain safety and enhances stove performance.
Do any wood inserts qualify for a federal tax credit?
Yes, wood-burning inserts that meet government efficiency standards and qualify for the 30% federal tax credit are clearly marked at the top of each product description on HVACDirect.com. You can also view all qualifying models in one place at https://hvacdirect.com/stoves/tax-credit-stoves.html to find the best option for your home.
What is a faceplate or surround for a fireplace insert?
A faceplate, surround, or trim kit is used with fireplace inserts to cover and close the gap between the insert and the fireplace opening. It helps create a clean, finished look while ensuring a proper fit, and should be sized slightly larger than your fireplace’s width and height. Various sizes are available to match common fireplace openings for a seamless installation.
Do I need a blower for my fireplace insert?
A blower is a great addition to a fireplace insert that helps boost heat output and improves efficiency by circulating warm air more effectively throughout your room. While most inserts can operate without a blower, adding one is beneficial if you want faster, more even heating. If extra heat isn’t necessary, your insert will still work well without a blower.
Can I use it in a heatilator fireplace and cut the bottom out?
    The Osburn 2700 is not tested to be installed into a pre-fabricated or zero clearance fireplace. The term "heatilator" can often refer to different types of fireplaces that may be capable of using this model. Please give us a call with the model of the fireplace. Images are extremely helpful as well. Thanks!    
Did you find what you were looking for?
blockboard tech