The Style Crest-Revolv mobile home air conditioner and gas furnace system is the next generation of HVAC products designed specifically for mobile homes.
30 Feet of 3/8" x 3/4"
Line sets are the copper lines which connect an outdoor condensing unit/heat pump to an inside air handler or evaporator coil. Line sets are available in different lengths and diameters to fit most applications.
Style Crest-Revolv MG1E 80% 90,000 BTU Mobile Home Gas Furnace with Coil Cabinet - R454B Compatible
OVERVIEW
The Style Crest-Revolv MG1E-B090F1ABM1 is a good solution for many manufactured or mobile home gas furnace applications. With its easy installation procedures, low maintenance, and included LP conversion kit, the MG1E-B090F1ABM1 will save you money both up front and over time.
QUICK FACTS
90,000 BTU, 80% natural gas furnace
Can generally heat a medium mobile home in ideal applications
Compatible with R410A and R454B refrigerant
Natural gas out of the box, but comes with an LP kit for field installation if needed
Low maintenance requirements
AC coil cabinet included with purchase (condenser and coil sold separately)
Efficient ECM blower motor
90,000 BTU, 80% AFUE
With a system input of 90,000 BTU, The Style Crest-Revolv MG1E-B090F1ABM1 furnace can generally heat medium mobile homes in ideal applications. With a basic efficiency rating of 80% AFUE, this input equates to an output of 72,000 BTU, and 80% of the fuel going into the unit is contributed to heating your home and the remaining 20% of the fuel is lost out of the flue venting and is used up in normal furnace operations. If you are coming from our site's sizing calculator, please note that it is a good idea to upsize any calculation to compensate for limited insulation and other factors that cause a mobile home to differ from traditional home sizing. If you have any questions, please contact us. Please note that this furnace is intended to only be used in mobile and manufactured homes and requires a straight flue pipe without any elbows.
Warranty
Revolv gas furnaces come with 2 year parts, and 10 year heat exchanger warranty when registered online through the manufacturer and with an installation that follows your state and local codes.
Installation and Maintenance
The Style Crest-Revolv MG1E-B090F1ABM1 furnace is designed to be easily installed for a faster process, lowering labor costs. While this furnace is natural gas out of the box, a propane conversion kit is included in this package to be field-installed if needed with no additional material cost, saving you money. With its sealed motor bearings, reliable burner controls, modern hot surface ignitor, and sealed combustion, this furnace has low maintenance requirements, providing the peace of mind that your unit will reliably heat your home even in the coldest winter months.
Ensure efficient refrigerant flow and optimal HVAC performance with this 50-foot insulated line set. Designed for seamless connection between an outdoor condensing unit or heat pump and an indoor air handler or evaporator coil, this line set offers durability, flexibility, and superior thermal protection for long-lasting operation.
Key Features:
✔ Premium Copper Tubing: 3/8" liquid line (LL) and 3/4" suction line (SL) for efficient refrigerant transfer. ✔ Pre-Insulated for Efficiency:3/8" thick insulation minimizes energy loss and condensation buildup. ✔ Versatile Application: Compatible with heat pumps and conventional split systems. ✔ Easy Installation:Flexible and durable copper tubing allows for smooth routing and connection. ✔ Extended 50-Foot Length: Ideal for larger residential and light commercial HVAC installations.
Upgrade your HVAC system with this high-quality insulated line set, engineered for reliability, efficiency, and ease of installation.
Style Crest-Revolv 2.5 Ton 13.4 SEER2 Mobile Home Air Conditioner Sweat-Fit Condenser - R454B
Note: This product requires professional installation in order to receive the manufacturer's warranty.
OVERVIEW
The Style Crest-Revolve HSA Sweat Fit Series Mobile Home Air Conditioner offers exceptional performance. The unit, when combined with our engineered coils or air handlers, offers a full line of quality, split system cooling equipment.
QUICK FACTS
2.5 ton, 13.4 SEER2 Air Conditioner condenser
30,000 BTU
Sweat Fit
MD Models Offer Full Service Valves: These brass valves are easily accessible and simplify servicing of the refrigeration system. Charged with refrigerant for 20 feet of lineset
High Pressure Switch: Protects against abnormally high system pressures. Auto-reset feature prevents nuisance service visits.
Liquid Line Filter Drier: Included with unit, factory installed on QD and field installed on MD models
Warranty
Style Crest-Revolv condensers come with 5 year parts warranty when registered online through the manufacturer and with an installation that follows your state and local codes.
2.5-3 Ton Style Crest-Revolv Mobile Home Coil Sweat-Fit - R454B
The Style Crest-Revolv mobile home coil is the next generation of HVAC products designed specifically for mobile homes. This mobile home coil is built with Sweat-Fit connections.
Standard Features
Coil has built in strainer for coil protection
UL listed and leak test to 500 psi
Dry type pan does not maintain standing water
Kit contains drain hose, fittings, and furnace cover plates for gas/oil furnace
This product and many products on our site may contain a chemical know to the state of California to cause cancer or birth defects or other reproductive harm. For more information about Proposition 65 please Click Here.
Suction Valve Size
3/4"
2.5-3 Ton Style Crest-Revolv Mobile Home Coil Sweat-Fit - R454B
This product and many products on our site may contain a chemical know to the state of California to cause cancer or birth defects or other reproductive harm. For more information about Proposition 65 please Click Here.
Style Crest-Revolv MG1E 80% 90,000 BTU Mobile Home Gas Furnace with Coil Cabinet - R454B Compatible
You will need Adobe® Acrobat® Reader to view PDF documents.
Electrical
120 Volt - Single Phase
Heating BTU
90,000 BTU
Blower Motor
ECM Multi Speed
Brand/Manufacturer
Style Crest-Revolv
Burner Stages
Single
Configuration
Downflow
Phase
Single Phase
Exhaust Flue Requirement
Metal
Max Breaker Size
15 amps
Safety Information
This gas appliance requires a trained technician to install. Improperly connecting gas lines or improperly connecting a gas flue or venting may result in death. By purchasing this item, you are agreeing that you are using a trained technician to install this gas appliance. We will not be responsible for any injury or property damage arising from improper service or service procedures. Whoever installs or services this unit assumes responsibility for any personal injury or property damage which may result. Many jurisdictions require a license to install this equipment.
This product and many products on our site may contain a chemical know to the state of California to cause cancer or birth defects or other reproductive harm. For more information about Proposition 65 please Click Here.
30 Feet of 3/8" LL x 3/4" SL x 3/8" Insulated Line Set
Feature
Spec
SKU
LS38343830
Length
30 feet
Weight (in lbs)
35.000000
Liquid Line
3/8"
Brand/Manufacturer
Online Supply
Suction Line
3/4"
Suction Line Insulation Thickness
3/4"
50 Feet of 3/8" LL x 3/4" SL x 3/8" Insulated Line Set
This product and many products on our site may contain a chemical know to the state of California to cause cancer or birth defects or other reproductive harm. For more information about Proposition 65 please Click Here.
Great service by sale man Bill Z and customer service because my first Furnace was damaged and they send me other one right away working just fine thanks a lot hvacdirect!!
Review byGregorio
Posted on
Bought this unit in November so needed to have it running as soon as possible.
Price
100%
Service
100%
Quality
100%
I have used this through one heating season and I couldn't be happier with the performance of the furnace. I have not had the AC part installed yet so I can only review the heating side.
Review byRick
Posted on
Fantastic
Price
100%
Service
100%
Quality
100%
Everything was fantastic.
Review byWalter
Posted on
So far so good
Price
100%
Service
100%
Quality
80%
So far so good. The new smell from the furnace is slowly abating.
The 25 year old bi-metal thermostat was not compatible with the assembly,
so I purchased a new one from Amazon. It was an inexpensive digital thermostat that seems to work well with the new furnace.I have learned to try to keep things as simple as possible.
Review byPaul
Posted on
Quick Delivery
Service
100%
Quality
80%
Price
100%
The furnace was installed and has gone through a variety of weather conditions since. All seems to be good. We were actually surprised at how quickly it was delivered. We are hoping that the next utility bill will also reflect some gas usage reductions, even though it is not one of the highest rated furnaces. However, one comment was that it was (slightly) more noisy than the previous furnace.
Review byRraymond
Posted on
Will give good service
Service
100%
Quality
100%
Price
100%
I know it's been a couple of months since I got this. But I wasn't ready to respond. To date, I have not had the heater unit installed. Old one is still working and I am waiting for better weather. The Heater seems to be ok, looks like it should do what I want. Only issue for me is I am not real happy that it seems so many of our products are built outside the US. But this one is built in Mexico which I prefer over China. I think it will give good service for years to come, once it's actually installed. I was very happy with the help and support I got from purchasing the unit through you folks. And even delivery was good. Thx for your time in follow up. I look to buy more products from you guys again in the future. Happy Holidays.
Review bySteven
Posted on
Working great
Price
100%
Service
100%
Quality
100%
the unit is working great. As soon as I get it paid off,I will order the inside and outside cooling units from you.
