We use cookies to make your experience better.To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies.Learn more.
An ACIQ combination system is a great choice to keep your home comfortable all season long. With tons of features and a great price, an ACIQ dual fuel system is a perfect choice for all of your heating and cooling needs.
Santa Fe Ultra70 Whole-Home Ventilating Dehumidifier, 70-pint | R454B
OVERVIEW
The Santa Fe Ultra70 was the first compact whole house ventilating dehumidifier built for tight, low-clearance installs. It removes up to 70 pints of moisture per day and covers homes up to 1,800 square feet, which makes it a strong match for smaller houses, condos, and apartments.
Ducted into your HVAC system, the Ultra70 controls humidity everywhere at once instead of one room at a time. That means no musty basement smell, no clammy upstairs bedrooms, and no conditions that let mold and wood rot get started.
The cabinet measures 12" W x 12" H x 28" L and converts between horizontal and vertical airflow discharge, so it works in mechanical rooms, closets, attics, basements, and crawl spaces alike. Now running R454B refrigerant, it exceeds Department of Energy efficiency standards and is built at Santa Fe's headquarters in Madison, Wisconsin.
Key Features:
70 Pints Per Day – Whole-home moisture control for spaces up to 1,800 sq. ft.
Optional Fresh Air Ventilation – Duct outdoor air in to dilute indoor pollutants
MERV-13 Filtration – Standard filter captures fine airborne particles
Convertible Discharge – Rotate the panel for horizontal or vertical airflow
Compact 12" x 12" x 28" Cabinet – Fits where standard units can't
R454B Refrigerant – Exceeds DOE efficiency standards
115V / 5.4 Amps – Plugs into a standard grounded outlet
Made in Madison, Wisconsin – Heavy-duty steel construction
Customized Installation and Operation
The Ultra70 gives you three ways to install it. Tie it into your existing HVAC system with a dedicated 8" return and a supply connection with backdraft damper. Run it on its own separate ductwork. Or set it freestanding in a basement or crawl space when ducting isn't practical.
Both the return air inlet and supply air outlet use 8" duct collars. The back panel comes configured for horizontal flow through and rotates for vertical flow through with a T20 torx bit, which is what lets the same unit work in an attic, a closet, or under a floor.
Fresh air ventilation is optional and simple to add. A "T" into the inlet duct brings outdoor air into the system to dilute pollutants and maintain normal oxygen levels indoors, and the volume is adjustable with a range of dampers and controls.
HVAC Integration – Dedicated return plus ducted supply to the air handler
Dedicated Ducting – Runs on its own duct system independent of HVAC
Freestanding Operation – Works standalone in basements and crawl spaces
Optional Outdoor Air – Ventilation duct T's into the inlet, regulated by dampers and controls
Continuous Drain – Gravity drainage, no manual emptying
Warranty Information
Santa Fe warrants the Ultra70 Dehumidifier to be free from defects in materials and workmanship. The unit includes a 5-year limited warranty, with extended coverage on select components. Warranty coverage may vary based on installation, application, and registration requirements. Refer to the manufacturer’s documentation for complete warranty details.
Premium Materials & Construction
Dehumidifiers live in the roughest parts of a house. The Ultra70 is built from heavy-duty steel with components chosen to hold up to damp air, dust, and temperature swings over years of runtime.
Inside, a high-efficiency refrigeration coil, compressor, and fan work together to pull more moisture using about 15% less energy than comparably sized units. The R454B refrigerant charge lowers the environmental impact compared to earlier models while keeping performance where it needs to be.
The MERV-13 filter comes standard and pulls fine particles out of the airstream as the unit works. Vacuum it regularly and swap it every six months. The unit operates between 49°F and 95°F, plugs into a standard 115V grounded outlet at 5.4 amps, and ships with a 9 ft. cord.
Why Choose the Santa Fe Ultra70 Whole House Dehumidifier?
Whole-Home Moisture Control
Removes up to 70 pints per day across homes up to 1,800 square feet.
Ducted operation treats every room instead of chasing humidity one space at a time.
Fits Where Others Won't
Compact 12" x 12" x 28" cabinet handles low-clearance installs.
Convertible horizontal or vertical discharge solves tricky duct layouts.
Ventilation and Filtration Built In
Optional fresh outdoor air ducting dilutes indoor pollutants.
Standard MERV-13 filter captures fine airborne particles.
Efficiency You Can Measure
Exceeds Department of Energy standards with R454B refrigerant.
High-efficiency coil, compressor, and fan use roughly 15% less energy than similar units.
Built to Last
Heavy-duty steel construction, assembled in Madison, Wisconsin.
Continuous drainage and minimal maintenance for set-and-forget operation.
30 Feet of 3/8" x 5/8"
Ensure efficient refrigerant flow and system performance with this 30-foot insulated line set. Designed for seamless connection between an outdoor condensing unit or heat pump and an indoor air handler or evaporator coil, this line set provides durability, flexibility, and thermal protection for reliable HVAC operation.
Key Features: ✔ Premium Copper Tubing: 3/8" liquid line (LL) and 5/8" suction line (SL) for efficient refrigerant transfer. ✔ Pre-Insulated for Efficiency: 3/8" thick insulation helps minimize energy loss and condensation buildup. ✔ Versatile Application: Compatible with heat pumps and conventional split systems. ✔ Easy Installation: Flexible and durable copper tubing simplifies routing and connection. ✔ Standard 30-Foot Length: Ideal for a wide range of residential and light commercial HVAC installations.
The ACiQ TL04-1 Smart Thermostat is engineered to bring precise, intelligent control to your home’s HVAC system. Compatible with both standard 24V wiring and HA & HB communication protocols, it delivers flexibility for new builds or system upgrades.
QUICK FACTS
Dual Compatibility: Supports 24V systems and HA/HB non-polarity communication systems
Control Options: Works with single and two-stage heating, cooling, and heat pump systems with auxiliary/emergency heat
Modern Touchscreen: Auto-wake screen with responsive touch interface
Clean Installation: Includes M-base, trim plate, wire labels, screws, and anchors
Smart Safety: Built-in installation tips, safety reminders, and FCC/IC compliance
Perfect for homeowners looking to upgrade their comfort with modern, intelligent technology
Wall Mount Bracket for Condensers 48"
This wall mount bracket is perfect for outdoor condensers. The length of the the wall bracket arms are 48" long. The condensing unit is mounted onto the L-shaped brackets and fastened using bolts and anti-vibration washers (not included with brackets).
Features:
Steel: 10 GA
Powder-coated grey Finish
Load rating: 600 lbs per pair
Holes will accommodate anchors for installation
Warranty: 1 year
ACB line of wall brackets are approved by the Florida Building Commission and are High Velocity Hurricane Zone (HVHZ) approved. (See product certification documentation for complete details.)
No Return Policy
All sales of this product are final and are non-refundable.
Installation Kit for Condensers
Ensure a professional and secure installation for your condenser with this comprehensive installation kit. Designed to provide all the essential components needed for a smooth setup, this kit helps protect your system while ensuring proper electrical and refrigerant connections.
What’s Included:
3/4" x 6' Electrical Whip – SKU: 84138
60A Non-Fused Disconnect – SKU: 83335
Surge Protector – SKU: ICM517
CPS Charging Adapter – SKU: 87-AD87
Telescoping Wall Sleeve – SKU: NFP-75
Equip your condenser with everything needed for a safe, durable, and professional installation. Order your Condenser Installation Kit today!
ICP 80% Gas Furnace Conversion Kit Condensing Natural Gas to Propane
Conversion Kit for Natural Gas Furnace to propane
ACIQ 1.5 Ton 14.3 SEER2 Heat Pump Condenser - R454B Single Stage
OVERVIEW
The ACIQ R5H5S18AKAAA is a standard heat pump condenser. Designed with comfort in mind and an inexpensive option for nearly any application, this condenser is considered a good all-around option for almost any application.
QUICK FACTS
Factory pre-charged with enough refrigerant for a 15-foot line set, ensuring proper performance and efficiency right out of the box.
1.5 ton, 14.3 SEER2 heat pump condenser
Can heat and cool up to a small house in average conditions
Single stage compressor
Pre-charged with R454B refrigerant
Filter drier included to be field-installed
1.5 Tons
The ACIQ R5H5S18AKAAA heat pump condenser has an output of 1.5 tons, generally enough to heat and cool up to a small house in ideal climates. In many system configurations, the tonnage of the unit's paired coil or air handler will be larger in tonnage than this condenser, which maintains the efficiency of the unit. Please note that this condenser cannot function on its own, and it needs an indoor coil or air handler to work. This unit will also only heat down to around 35°F, and if you need heat any lower than this, a backup heat strip will be needed to act as straight electric heating in a compatible air handler.
14.3 SEER2
The ACIQ R5H5S18AKAAA air conditioner condenser is rated at 14.3 SEER2, making it between 5-7% more efficient than standard 13.4 SEER2 units, saving you money in electric bills over the entire lifetime of your unit. In general, heat pumps will heat more efficiently than straight electric furnaces.
Efficiency Choices for Every Climate
Not all heat pumps are built the same. Depending on the climate of where you live, your best fit can depend dramatically on the efficiency of the heat pump at lower temperatures. The right fit saves you money by reducing energy bills. At 0°F, this heat pump operates at 35% efficiency, making it a good fit for warmer climates where moderate heating is sufficient.
Disclaimer: This condenser contains R454B refrigerant, which is classified as an A2L refrigerant. To comply with safety standards, this unit must be paired with an R454B air handler or evaporator coil equipped with a leakage detection system. Failure to comply with these requirements may result in safety hazards and could void the warranty. Please call us at 1-888-557-9206 if you have any questions.
All ACIQ condensers come pre-charged with enough refrigerant for a 15-foot line set, making installation faster and more convenient. This pre-charged design saves installers time and reduces labor costs by eliminating the need for manual refrigerant charging. It also helps ensure the system starts with the correct amount of refrigerant, minimizing the risk of improper charging that could impact performance and efficiency. If a longer line set is required, your installer will need to add additional refrigerant to maintain optimal operation.
Quiet Comfort
Leave fossil fuels behind with an ACiQ heat pump system. Every ACiQ heat pump condenser uses a scroll compressor to give exceptional cooling performance and highly efficient, all-electric heat. WiFi-capable communicating condensers are also available.
High Efficiency
ACiQ heat pumps come in a range of efficiency options to fit your budget's needs and your local weather conditions. Save up to 63% on energy costs with a newer model.
Longer life, longer warranty
ACiQ heat pump condensers are 100% run-tested at the factory. Protective coatings on the fins and baked-on galvanized finishes mean long life even in harsh conditions. ACiQ’s extended warranty with online registration provides 10 year protection.
No-Tear 30 Feet of 3/8" x 5/8" - Black
Ensure smooth refrigerant flow and HVAC system efficiency with this no-tear 30-foot insulated line set. Designed for seamless connection between an outdoor condensing unit and an indoor air handler or evaporator coil, this line set offers durability, flexibility, and superior thermal insulation for high-performance HVAC applications.
Features:
3/8" liquid line (LL) and 5/8" suction line (SL) for optimal refrigerant transfer.
Extra thick 1/2" insulation to prevent tears during installation and from age.
30' long line set - Standard line set length for your typical HVAC installation.
Flexible and durable copper tubing allows for smooth routing and secure connections.
Durable, No-Tear Line Sets Built for Tough Installations
No-tear line sets are designed to eliminate one of the most common frustrations during HVAC installations—insulation that rips, tears, or breaks down over time. Built with enhanced durability and UV-resistant insulation, these line sets maintain their integrity during handling, installation, and long-term outdoor exposure. The result is a cleaner install, better protection, and fewer callbacks compared to standard line sets.
Key Benefits
No-Tear Insulation Construction – Resists ripping and damage during installation
Enhanced Durability – Holds up to jobsite handling and long-term use
UV-Resistant Jacket – Protects against sun exposure and outdoor degradation
Cleaner Installation Finish – Maintains a professional look without patching or tape
Long-Term Insulation Performance – Helps prevent breakdown over time
Contractor-Friendly Design – Easier to work with compared to standard line sets
Built to Withstand Real Jobsite Conditions
Traditional line sets often use insulation that can tear easily when pulled through walls, around corners, or across rough surfaces. No-tear line sets are engineered with a reinforced outer jacket that resists damage during installation, helping maintain insulation integrity from start to finish. This added durability not only improves installation efficiency but also reduces the need for repairs, tape, or replacement sections—saving time on the job and delivering a more professional final result.
UV Protection for Long-Term Outdoor Performance
Standard insulation can degrade when exposed to sunlight, leading to cracking, peeling, and reduced performance over time. No-tear line sets feature a UV-resistant outer layer designed to withstand prolonged outdoor exposure, helping preserve insulation quality and system efficiency. This makes them an ideal choice for installations where line sets are exposed along exterior walls or rooftops.
Ecobee Smart WiFi Thermostat with Alexa
The Ecobee is more than a smart thermostat. Most thermostats only read the temperature in one place (usually the hallway) which can make other rooms uncomfortable. Ecobee5 comes with a room sensor to help manage hot or cold spots. When you place sensors in your favorite rooms, ecobee5 can read the temperature and detect occupancy. That's how it ensures comfort in the rooms that matter.
With Amazon Alexa Voice Service built inside, ecobee5 can perform the many 'skills' that come with Alexa. All you have to do is ask, and watch the blue light pipe on top of the thermostat blink in response. For total hands-free control, it can even hear you from across the room. Imagine you’re throwing a last-minute dinner party. Simply ask your ecobee5 to walk you through each step out loud – from finding the right recipes to the ideal music playlist. ecobee5 has embedded microphones with far-field voice recognition and a speaker engineered for clear voice and full sound. It’s the smart thermostat that looks at home on your wall – that you can hear and speak to from across the room.
Features
Not at your thermostat? No problem.
Adjust temperature and comfort settings easily from the ecobee mobile app on your Android and iOS devices, including Apple Watch.
Connects to your existing home network
Convenient Wi-Fi capabilities offer a secure and reliable connection.
Knows you have a life
Vacationing and forgot to let your ecobee know? Make a vacation event using the ecobee mobile app. If something’s wrong with your equipment, we can send you service alerts and reminders.
Control the volume
If it's getting a little loud for your taste, you can use the app to adjust the volume.
Built to last
ecobee thermostats are hardwired, which means your thermostat isn’t relying on a battery or your HVAC equipment to charge itself.
E Lite Equipment Pad 36" x 36" x 3"
E Liteis a plastic pad designed as a mounting base for air conditioning condensers. The rugged design provides uniform and generous ribbing for optimum, self-leveling ground support without inserts. E Lite is injection molded from polypropylene, resulting in a pad that is lightweight, but not too light. A subtle texture prevents unit slide and presents a classic appearance, which is enhanced by rounded edges and a concrete gray color. Each pad is molded with its size in raised letters.
High recycled plastic content
Subtle texture resists unit slide
Unaffected by UV or weather
Uniform ribbing transfers load evenly
Drillable for securing unit
Lightweight, yet rugged
No Return Policy
All sales of this product are final and are non-refundable.
No-Tear 30 Feet of 3/8" x 5/8" - White
Ensure smooth refrigerant flow and HVAC system efficiency with this no-tear 30-foot insulated line set. Designed for seamless connection between an outdoor condensing unit and an indoor air handler or evaporator coil, this line set offers durability, flexibility, and superior thermal insulation for high-performance HVAC applications.
Features:
3/8" liquid line (LL) and 5/8" suction line (SL) for optimal refrigerant transfer.
Extra thick 1/2" insulation to prevent tears during installation and from age.
30' long line set - Standard line set length for your typical HVAC installation.
Flexible and durable copper tubing allows for smooth routing and secure connections.
Durable, No-Tear Line Sets Built for Tough Installations
No-tear line sets are designed to eliminate one of the most common frustrations during HVAC installations-insulation that rips, tears, or breaks down over time. Built with enhanced durability and UV-resistant insulation, these line sets maintain their integrity during handling, installation, and long-term outdoor exposure. The result is a cleaner install, better protection, and fewer callbacks compared to standard line sets.
Key Benefits
No-Tear Insulation Construction - Resists ripping and damage during installation
Enhanced Durability - Holds up to jobsite handling and long-term use
UV-Resistant Jacket - Protects against sun exposure and outdoor degradation
Cleaner Installation Finish - Maintains a professional look without patching or tape
Long-Term Insulation Performance - Helps prevent breakdown over time
Contractor-Friendly Design - Easier to work with compared to standard line sets
Built to Withstand Real Jobsite Conditions
Traditional line sets often use insulation that can tear easily when pulled through walls, around corners, or across rough surfaces. No-tear line sets are engineered with a reinforced outer jacket that resists damage during installation, helping maintain insulation integrity from start to finish. This added durability not only improves installation efficiency but also reduces the need for repairs, tape, or replacement sections-saving time on the job and delivering a more professional final result.
UV Protection for Long-Term Outdoor Performance
Standard insulation can degrade when exposed to sunlight, leading to cracking, peeling, and reduced performance over time. No-tear line sets feature a UV-resistant outer layer designed to withstand prolonged outdoor exposure, helping preserve insulation quality and system efficiency. This makes them an ideal choice for installations where line sets are exposed along exterior walls or rooftops.
ACiQ Non-Programmable 2H/1C Thermostat
The ACiQ 2 Heat/1 Cool Non-Programmable Thermostat is a cost effective solution to temperature control! Designed with a bright backlight and large easy to read characters, this thermostat is easy to operate for all consumers.
Large display with bright blue/green/white backlight
Temperature control range (°F): 44°F-90°F (7°C-32°C)
24v or battery powered
Configurable for electric or gas setups
Separate heating and cooling swing adjustments, including 2nd stage adjustments
Separate B & O terminals
Toggleable filter change indicator
Heating and cooling set point limits
Room temperature calibration adjustment
Toggleable 5 minute compressor delay protection
Temperature measurement sccuracy: ±1°C (at 20°C)
6 Inch Heat Pump Risers (4-Pack)
Heat pump risers provide a sturdy and stable solution for adding elevation to a heat pump in colder climates to keep the heat pump above average snow levels. The one-piece, heavy duty plastic unit is manufactured with thick wall sections and generous reinforcements are employed in the most effective areas, yielding a strong yet lightweight structure.
Elevates heat pumps, air conditioners, air handlers, or other equipment
Allows drainage and keeps corrosion of metal bases to a minimum
Absorbs vibrations and noise
Comes in 4-pack
ACiQ WiFi Programmable Touchscreen Thermostat
The STN855W is a versatile WiFi thermostat offering 7-day, 5/1/1 programmable, or non-programmable options. It features a temperature range of 32°F-99°F (1°C-40°C) and precise control from 44°F-90°F (7°C-32°C) with an accuracy of ±1°C. Powered by 24V, it comes in a compact design with dimensions of 120 x 98 x 28 mm, making it ideal for efficient and customizable temperature management.
E Lite Equipment Pad and Heat Pump Risers Kit 36" x 36" x 9"
E Lite Condenser Pad and Heat Pump Risers
E Lite Equipment Pad 36" x 36" x 3"
The E Lite is a plastic pad designed as a mounting base for air conditioning condensers. The rugged design provides uniform and generous ribbing for optimum, self-leveling ground support without inserts. E Lite is injection molded from polypropylene, resulting in a pad that is lightweight, but not too light. A subtle texture prevents unit slide and presents a classic appearance, which is enhanced by rounded edges and a concrete gray color. Each pad is molded with its size in raised letters.
High recycled plastic content
Subtle texture resists unit slide
Unaffected by UV or weather
Uniform ribbing transfers load evenly
Drillable for securing unit
Lightweight, yet rugged
6 Inch Heat Pump Risers (4-Pack)
Heat pump risers provide a sturdy and stable solution for adding elevation to a heat pump in colder climates to keep the heat pump above average snow levels. The one-piece, heavy duty plastic unit is manufactured with thick wall sections and generous reinforcements are employed in the most effective areas, yielding a strong yet lightweight structure.
Elevates heat pumps, air conditioners, air handlers, or other equipment
Allows drainage and keeps corrosion of metal bases to a minimum
Absorbs vibrations and noise
Comes in 4-pack
No Return Policy
All sales of this product are final and are non-refundable.
66k BTU 80% AFUE Single Stage 17.5" Wide Furnace
OVERVIEW
The ACiQ N80MSN0701712A is an inexpensive model of furnace to provide reasonable comfort to your home. At a basic efficiency, this furnace will heat your home adequately with the right output, providing comfort to your home even in the coldest parts of the year.
QUICK FACTS
66,000 BTU, 80% AFUE natural gas furnace
Generally suitable for up to a small to medium house in ideal applications
Multi-positional design - can be installed in the upflow, downflow, or horizontal orientations
Single stage burner with a multi-speed blower
Field-convertible to propane with an optional LP kit
On board self-diagnostics
66,000 BTU, 80% AFUE
The ACiQ N80MSN0701712A has an input of 66,000 BTU. With an efficiency of 80%, this means that the furnace has an output of 52,800 BTU. The 80% AFUE also means that for the gas going into the furnace, 80% of it is used to heat your home while the remaining 20% is lost out the flue piping and lost to normal furnace operations. All 80% furnaces require metal flue venting, and if you need it to be plastic/PVC venting a furnace with an efficiency of 90% or above is required. While this unit uses natural gas as fuel out of the box, we also have an LP conversion kit, available at an additional cost. Please note that this furnace is not Low NOx or Ultra Low NOx compliant and if shipped to California may be subject to a mitigation fee.
Warranty
ACiQ offers 10 year parts and 20 year heat exchanger limited warranties. Please note that in order for the heat exchanger and parts warranties to be upheld, the unit must be registered through the manufacturer within 90 days of installation. The installation must also follow your state and local codes.
Installation and Durability
With its ability to be installed in any configuration (upflow, downflow, or horizontal) the ACiQ N80MSN0701712A is very versatile in application potential. The unit has a durable outer casing that can withstand wear-and-tear through its entire lifetime, providing the peace of mind that your home will stay comfortable year-round. Please note that this furnace is not intended for mobile home installation on its own.
Quiet Comfort
Every ACiQ furnace is designed to keep your family warm and comfortable year after year. Whisper-quiet ECM blower fans, solid construction with thicker sheet metal and more cabinet insulation give you near-silent operation. From entry level to top-of-the-line, your comfort is the priority.
High Efficiency
ACiQ saves you money up front, but also over time by reducing energy bills. Multi-speed or Variable Speed ECM blowers come in every furnace. Adding options such as high-efficiency secondary heat exchangers, two stage heating, modulating burners and variable blowers all can further reduce your energy bills while increasing comfort.
Longer life, longer warranty
Thicker sheet metal, more cabinet insulation and aluminized steel heat exchangers reflect the highest build quality you can get. Every furnace is backed by ACiQ’s 10 year, 20 year or lifetime (depending on model) heat exchanger extended warranty with online registration.
ACIQ takes pride in its ability to provide a high-quality system, including all system components. Leaving no exception, the EAM5X24M17A horizontal coil is a superior option for almost any application while maintaining the entire unit's efficiency with a factory-integrated TXV kit for enhanced energy optimization. With its unique performance features along with its ability to be applied in any orientation, this coil is a superior option for your home's comfort.
QUICK FACTS
2 ton multi-positional evaporator coil
Works in almost any upflow, downflow, or horizontal system setup
Compatible with both AC-only and heat pump condensers
Factory-installed TXV kit for enhanced energy optimization
Sturdy and compact design
2 Tons
The ACIQ EAM5X24M17A is rated for up to 2 tons of heating and cooling. With its ability to be installed with either an AC-only condenser or a heat pump condenser, this unit is ideal for many applications. In some packages, this coil will be larger than its paired condenser, which will increase the overall efficiency of the entire unit, but the coil should never be smaller than its paired condenser. Please note that this item cannot operate independently from a compatible condenser and blower or furnace, each available at an additional cost.
Warranty
ACIQ offers a 10 year parts warranty on their coils when they are installed following your state and local codes, as well as the system is paired with a certified system matchup. Please note that in order to obtain the entire length of this warranty, the entire unit must be registered through the manufacturer.
This product and many products on our site may contain a chemical know to the state of California to cause cancer or birth defects or other reproductive harm. For more information about Proposition 65 please Click Here.
This product and many products on our site may contain a chemical know to the state of California to cause cancer or birth defects or other reproductive harm. For more information about Proposition 65 please Click Here.
60,000 BTU 80% AFUE Single Stage ACiQ Gas Furnace | 17.5" Width | Multi-Positional
Feature
Spec
SKU
N80MSN0701712A
Weight (in lbs)
120
AHRI Certificate Number
213146136
Exhaust Flue Requirement
Metal
Brand/Manufacturer
ACiQ
Replaces
N80ESN0701712A
UPC
686797024766
Equivalent
Carrier Equivalent: 58SB0A070E17--12
Tempstar Equivalent: TN80ESN0701712A
Bryant Equivalent: 810SA36070E17
Furnace Efficiency / AFUE
80%
Heating BTU
66,000
Blower Motor
Multi-Speed ECM
Maximum CFM
1005
Configuration
Upflow/Downflow/Horizontal
Electrical
115v 1 Phase 60 Hz
Max Breaker Size
15 Amps
Burner Stages
Single
Ignition Type
Direct Ignition with Silicon Nitride Hot Surface Ignitor
Fuel Type
Propane, Natural Gas
Height
33 1/3"
Width
17 1/2"
Depth
29"
Warranty
20 Year Heat Exchanger and 10 Year Parts with Online Registration
You will need Adobe® Acrobat® Reader to view PDF documents.
Safety Information
This gas appliance requires a trained technician to install. Improperly connecting gas lines or improperly connecting a gas flue or venting may result in death. By purchasing this item, you are agreeing that you are using a trained technician to install this gas appliance. We will not be responsible for any injury or property damage arising from improper service or service procedures. Whoever installs or services this unit assumes responsibility for any personal injury or property damage which may result. Many jurisdictions require a license to install this equipment.
This product and many products on our site may contain a chemical know to the state of California to cause cancer or birth defects or other reproductive harm. For more information about Proposition 65 please Click Here.
ICP 80% Gas Furnace Conversion Kit Condensing Natural Gas to Propane
This product and many products on our site may contain a chemical know to the state of California to cause cancer or birth defects or other reproductive harm. For more information about Proposition 65 please Click Here.
This product and many products on our site may contain a chemical know to the state of California to cause cancer or birth defects or other reproductive harm. For more information about Proposition 65 please Click Here.
E Lite Equipment Pad and Heat Pump Risers Kit 36" x 36" x 9"
This product and many products on our site may contain a chemical know to the state of California to cause cancer or birth defects or other reproductive harm. For more information about Proposition 65 please Click Here.
This product and many products on our site may contain a chemical know to the state of California to cause cancer or birth defects or other reproductive harm. For more information about Proposition 65 please Click Here.
This product and many products on our site may contain a chemical know to the state of California to cause cancer or birth defects or other reproductive harm. For more information about Proposition 65 please Click Here.
This product and many products on our site may contain a chemical know to the state of California to cause cancer or birth defects or other reproductive harm. For more information about Proposition 65 please Click Here.
This product and many products on our site may contain a chemical know to the state of California to cause cancer or birth defects or other reproductive harm. For more information about Proposition 65 please Click Here.
This product and many products on our site may contain a chemical know to the state of California to cause cancer or birth defects or other reproductive harm. For more information about Proposition 65 please Click Here.
This product and many products on our site may contain a chemical know to the state of California to cause cancer or birth defects or other reproductive harm. For more information about Proposition 65 please Click Here.
This product and many products on our site may contain a chemical know to the state of California to cause cancer or birth defects or other reproductive harm. For more information about Proposition 65 please Click Here.
30 Feet of 3/8" LL x 5/8" SL x 1/2" No-Tear Insulated Line Set - White
This product and many products on our site may contain a chemical know to the state of California to cause cancer or birth defects or other reproductive harm. For more information about Proposition 65 please Click Here.
30 Feet of 3/8" LL x 5/8" SL x 1/2" No-Tear Insulated Line Set - Black
This product and many products on our site may contain a chemical know to the state of California to cause cancer or birth defects or other reproductive harm. For more information about Proposition 65 please Click Here.
30 Feet of 3/8" LL x 5/8" SL x 3/8" Insulated Line Set
Feature
Spec
SKU
LS38583830
Weight (in lbs)
35
Brand/Manufacturer
Online Supply
UPC
na
Liquid Line
3/8"
Suction Line
5/8"
Suction Line Insulation Thickness
3/4"
Color
Black
Length
30 feet
Santa Fe Ultra70 Whole-Home Ventilating Dehumidifier, 70-pint | R454B
Feature
Spec
SKU
UL3684
Weight (in lbs)
55
Size
70 Pints
Brand/Manufacturer
Santa Fe
UPC
810017961634
Included Items
Leveling feet (4), MERV 13 filter (9” x 11” x 1”), 8” round duct collars (2)
This product and many products on our site may contain a chemical know to the state of California to cause cancer or birth defects or other reproductive harm. For more information about Proposition 65 please Click Here.
Owners replacing 20‑ to 30‑year‑old furnaces and heat pumps report quieter operation, stronger airflow—including one 80% 110,000 BTU model described as having a fan three times more powerful—and reduced runtime, with one user citing 30% lower energy costs and another noting it runs about one‑quarter as often as their previous unit. Installation is frequently completed by homeowners in a weekend with generally easy setup, though some mention minor freight damage, a missing inducer clip requiring an added lock ring, thermostat compatibility issues, and occasional delivery or sizing mix‑ups.
AI Generated from the text of customer reviews
Top reviews
Very satisfied with this unit
Quality
100%
Service
100%
Price
100%
Replaced a 25 year old. Much quieter and better fan performance.
Review byET
Posted on
efficient heating, energy costs reduced by 30%, powerful fan, no problems.
Quality
100%
Service
100%
Price
100%
So much better than the 20 year old unit it replaced. Great support from HVAC, excellent price.
Review byDimitri
Posted on
Great BUY
Quality
100%
Service
100%
Price
100%
Fantastic delivery, installed with no problem. Works great! Doesn't run constantly Hot or Cold immediate! Homeowner, and I did it myself!
Review byDBWSR
Posted on
Excellent Unit - powerful fan!
Quality
100%
Service
100%
Price
100%
I had delivered an ACiQ 80% 110,000 BTU furnace. It is working great. I replaced a high efficiency 90% Bryant that had a known secondary heat exchanger issue. I watched The DIY HVAC Guy on youtube that recommended that all high efficiency units are crap and to go back to 80%. He couldn't be more right. The unit is running fine with no problems. The install was easy. I had to redo the ducting as per his instructions. The price i paid $1,300 compared to what Bryant installers wanted $13,000 was a no brainer. If you have mechanical hands and like stop watch How To youtube videos, get this one! You wont be disappointed. The heat is excellent a d the fan is 3 times more powerful than I used to have. Excellent unit thay will last 30+ years.
Review byChris
Posted on
excellent
Quality
100%
Service
100%
Price
100%
works great so far. easy to install. runs 1/4 of the time my 30 year old furnace ran, blows alot of air!
Review bybrent
Posted on
Very pleased
Quality
80%
Service
100%
Price
80%
At present we’re not using the heat but unit is performing well with external AC unit.
Returned thermostat due not being able to be incorporated into existing system. Return was painless and prompt reimbursement.
Would again purchase products from these
folks if need be.
Review byEddie
Posted on
Solid product
Quality
100%
Service
80%
Price
100%
We have installed about 6 of these, replacing williams wall furnaces. They work great. after 2 years, be sure to clean ignition sensor. That's the only thing we have done, other than clean filters.
Review byMark
Posted on
DIY
Quality
100%
Service
100%
Price
100%
This furnace was almost the same size as my 32 year old Carrier I replaced (6" shorter). CS was able to change order and I received the right size. Fast shipping and shipping damage. The new ACiQ furnace is quieter than the old one. Temp-Rise test was in range with factory settings. Saved a bundle and very happy with this product.
AI Generated from the text of customer reviews