Dual Fuel Comfort with Electric Heating and Gas Furnace Backup
This Goodman Furnace & Heat Pump dual fuel system gives homeowners the familiar comfort of a furnace and central air setup with the added benefit of heat pump heating. The heat pump provides central cooling and electric heating during milder weather, while the gas furnace delivers stronger heating performance when outdoor temperatures drop. By relying on electric heat pump operation during milder heating conditions, this system can help lower gas usage and reduce heating costs compared to a standard furnace and AC setup.
Key Benefits
Dual Fuel Comfort for Every Season – Provides central cooling, electric heat pump heating, and gas furnace heating from one complete system.
Reduced Gas Usage in Milder Weather – Heat pump operation reduces gas usage during milder heating weather compared to a furnace paired with a standard AC.
Gas Furnace Backup Heat – Provides strong gas heating support when colder outdoor temperatures call for furnace performance.
Central Cooling Included – The heat pump condenser also works as the outdoor cooling unit during warmer weather.
80% AFUE Furnace Efficiency – Converts approximately 80% of fuel consumed into usable heat for your home.
Heat Pump Cold-Weather Performance – Heat pump performance varies by model and should be reviewed based on your climate and comfort needs.
Upflow System Airflow – Includes a cased coil selected for upflow airflow applications.
Compatible Dual Fuel Controls – Requires a compatible thermostat designed to support heat pump and gas furnace operation.
Strong Warranty Coverage – Includes Goodman limited warranty coverage when properly installed and registered online.
How a Furnace & Heat Pump System Works
A Furnace & Heat Pump System, also known as a dual fuel system, works similarly to a traditional furnace and central air conditioner setup. The key difference is that the outdoor unit is a heat pump instead of an AC-only condenser. That means it can cool your home in summer and provide electric heating during milder heating weather.
When temperatures drop and stronger heat is needed, the gas furnace can take over. This gives homeowners a practical balance of electric heat pump operation when conditions are mild and dependable gas furnace heating when colder weather requires more heating power.
Dual Fuel Efficiency for Changing Weather
During milder heating conditions, the heat pump can provide electric heat without running the gas furnace as often. This helps homeowners save money by using electric heat pump operation during moderate weather, instead of relying on gas heat every time the home needs warmth.
When outdoor temperatures drop, the gas furnace remains available for stronger heating performance, giving homeowners a smart balance of everyday efficiency, long-term savings potential, and dependable comfort.
Heat Pump Performance in Colder Weather
The included heat pump can provide electric heating in colder weather, but performance depends on the specific heat pump model and outdoor temperature. For this system, review the heat pump’s cold-weather performance rating to understand how much heating support it can provide at lower temperatures.
For GLZS4BA heat pump systems, the heat pump operates at 40% efficiency at 0°F, giving homeowners electric heating support in colder conditions while the gas furnace remains available when stronger heat is needed.
Efficient Everyday Furnace Performance
An 80% AFUE furnace provides dependable gas heating with practical efficiency for everyday comfort. For example, a 60,000 BTU input rating at 80% AFUE provides approximately 48,000 BTUs of usable heating output, while the remaining heat is lost to the combustion process and exits through the venting. Because this is an 80% AFUE furnace, it requires metal flue venting. Homes with plastic or PVC furnace venting require a 90% AFUE or higher furnace.
Goodman Dual Fuel System: How Does it Work?
A Goodman dual fuel system combines the efficiency of an electric heat pump with the dependable heating power of a gas furnace to provide flexible, year-round home comfort.
During milder weather, the heat pump handles heating efficiently while also providing cooling during warmer months. As outdoor temperatures drop, the system can switch to the gas furnace for stronger heating performance when it is needed most.
By using two different heating sources within one system, a dual fuel setup helps balance comfort, efficiency, and cold-weather performance throughout the year.
Warranty
When installed according to applicable codes and registered online with Goodman, this Furnace & Heat Pump System may include:
10-Year Parts Limited Warranty
Lifetime Heat Exchanger Limited Warranty
Warranty coverage varies by included equipment and requires proper installation and online registration. Installation by a qualified HVAC professional is recommended to maintain warranty eligibility.
What’s Included
Goodman gas furnace
Goodman heat pump condenser
Goodman cased evaporator coil
Recommended Accessories
Compatible Dual Fuel Thermostat – Provides compatible control for heat pump and gas furnace operation.
Propane Conversion Kit – Converts the furnace from natural gas to liquid propane when propane operation is required.
Line Set – Connects the outdoor heat pump condenser to the indoor evaporator coil.
Condenser Installation Kit – Common installation materials for connecting the outdoor unit.
Return Air Package – Provides return air components for a cleaner installation setup.
Supply Plenum – Creates a proper supply air transition above the furnace.
Requirements, Considerations & Required Notices
Professional Installation Required – This Furnace & Heat Pump System should be installed and serviced by a trained HVAC technician in accordance with local codes and manufacturer requirements.
Compatible Dual Fuel Thermostat Required – A compatible dual fuel thermostat with at least two heat settings is needed to support heat pump and gas furnace operation.
System Airflow Configuration – Confirm the selected system matches the required upflow airflow layout for the installation.
Metal Flue Venting Required – This 80% AFUE furnace requires metal venting materials. Homes with plastic or PVC furnace venting require a 90% AFUE or higher furnace.
Fuel Compatibility – Furnace ships configured for natural gas operation. Liquid propane conversion requires the appropriate optional conversion kit.
Electrical Requirements – Confirm voltage, circuit protection, disconnects, and wiring requirements for all included equipment.
R32 Heat Pump Equipment – The heat pump condenser is pre-charged with R32 refrigerant and must be installed according to the product specifications, installation manual, and applicable safety standards.
NOx Regulation Notice
Please note that this furnace does not comply with Low NOx or Ultra-Low NOx regulations. If you have any questions, please contact us.
This furnace cannot be installed in Colorado or the following counties in California: Fresno, San Joaquin, Kern, Kings, Los Angeles, Madera, Merced, Orange, Riverside, San Bernardino, Stanislaus, Yolo, Tulare, San Diego, Ventura, Santa Barbara, San Luis Obsipo, Santa Clara, San Mateo, Alameda, Contra Costa, Marin, Sonoma, and Napa. In these areas you are required to purchase a Low NOx or Ultra-Low NOx furnace. If you have any questions, please contact us.
R32 Refrigerant Compatibility Notice
Disclaimer: This system includes equipment designed for use with R32 refrigerant, classified as an A2L refrigerant. R32 systems must be installed with compatible equipment and any required refrigerant leak detection components according to the product specifications, installation manual, and applicable safety standards. Failure to follow these requirements may result in safety hazards and could void the warranty. Please call us at 1-888-912-1827 if you have any questions.
60,000 BTU 80% AFUE Single Stage Goodman Gas Furnace | 17.5" Width | Upflow / Horizontal
Goodman 60,000 BTU 80% AFUE Upflow/Horizontal Gas Furnace
Reliable Gas Heating with Everyday Efficiency
When winter temperatures arrive, this Goodman gas furnace delivers dependable whole-home heating with practical efficiency and durable performance. Designed with modern blower and reliable gas burner technology, as well as installation options for compatible applications, it provides a strong heating solution for residential use.
Key Benefits
60,000 BTU Heating Capacity – Perfect for 1,300–1,600 sq. ft. homes in various climates when properly sized and installed.
80% AFUE Efficiency – Converts approximately 80% of fuel consumed into usable heat for your home.
9-Speed ECM Blower Motor – Uses less electricity than older PSC motors while supporting improved airflow and circulation.
Upflow/Horizontal Installation – Designed for upflow/horizontal applications to fit compatible installation layouts.
17.5" Cabinet Width – Designed to fit evaporator coils of a matching width.
Convertible to Liquid Propane – Can be field-converted to use liquid propane with an optional conversion kit.
Quiet, Durable Operation – Heavy-gauge steel cabinet and insulated design help reduce sound while protecting internal components.
Strong Warranty Coverage – Backed by Goodman limited warranty coverage when properly installed and registered online.
Heating Capacity and AFUE Guidance
This furnace is perfect for 1,300–1,600 sq. ft. homes in various climates when properly sized and installed. With a 60,000 BTU input rating and 80% AFUE efficiency, it is designed to provide dependable heating for compatible residential applications. Proper furnace sizing should always be confirmed through a professional load calculation based on climate, insulation, windows, ceiling height, layout, air leakage, and other home-specific factors.
Efficient Everyday Heating Performance
An 80% AFUE furnace provides dependable gas heating performance for compatible residential applications. For example, a 60,000 BTU input rating at 80% AFUE provides approximately 48,000 BTUs of usable heating output, while the remaining heat is lost to the combustion process and exits through the venting. Because this is an 80% AFUE furnace, it requires metal flue venting. Homes with plastic or PVC furnace venting require a 90% AFUE or higher furnace.
Advanced Airflow with a 9-Speed ECM Blower
The integrated 9-speed ECM blower motor provides improved electrical efficiency compared to older PSC blower designs. This blower helps support consistent air circulation throughout the home while reducing electrical consumption during operation.
Built for Long-Term Reliability
A heavy-gauge steel cabinet, durable hot surface igniter, self-diagnostic control board, and Goodman’s proven heat exchanger design work together to support long-term performance. The self-diagnostic controls simplify troubleshooting and service, while the insulated cabinet helps reduce operating noise.
Goodman Gas Furnace System: How Does it Work?
Goodman Gas furnaces provide dependable whole-home heating by using a controlled combustion process to create warm air and distribute it through the home’s ductwork.
Key components such as the burner, heat exchanger, blower motor, and venting system work together to deliver consistent comfort while helping maintain safe and efficient operation.
Understanding how these parts function together can make it easier to compare furnace options and choose a system that fits the home’s heating needs.
Warranty
When installed according to applicable codes and registered online with Goodman, this furnace includes:
10-Year Parts Limited Warranty
Lifetime Heat Exchanger Limited Warranty
Warranty coverage requires proper installation and online registration. Installation by a qualified HVAC professional is recommended to maintain warranty eligibility.
What’s Included
Goodman gas furnace
Recommended Accessories
Wall-Mounted Thermostat – Provides compatible temperature control for the furnace and connected HVAC system.
Propane Conversion Kit – Converts the furnace from natural gas to liquid propane when propane operation is required.
Return Air Package – Provides return air components for a cleaner installation setup.
Supply Plenum – Creates a proper supply air transition above the furnace.
Requirements, Considerations & Required Notices
Professional Installation Required – This gas furnace should be installed and serviced by a trained HVAC technician in accordance with local codes and manufacturer requirements.
Metal Flue Venting Required – This 80% AFUE furnace requires metal venting materials. Homes with plastic or PVC furnace venting require a 90% AFUE or higher furnace.
Electrical Requirements – Requires 115-volt, single-phase power and proper circuit protection.
Cabinet Width – Confirm the 17.5" cabinet width fits the available installation space and matched indoor equipment.
Fuel Compatibility – Ships configured for natural gas operation. Liquid propane conversion requires the appropriate optional conversion kit.
Installation Configuration – Designed for upflow/horizontal installations when installed according to manufacturer guidelines.
NOx Regulation Notice
Please note that this furnace does not comply with Low NOx or Ultra-Low NOx regulations. If you have any questions, please contact us.
This furnace cannot be installed in Colorado or the following counties in California: Fresno, San Joaquin, Kern, Kings, Los Angeles, Madera, Merced, Orange, Riverside, San Bernardino, Stanislaus, Yolo, Tulare, San Diego, Ventura, Santa Barbara, San Luis Obsipo, Santa Clara, San Mateo, Alameda, Contra Costa, Marin, Sonoma, and Napa. In these areas you are required to purchase a Low NOx or Ultra-Low NOx furnace. If you have any questions, please contact us.
Goodman 2 Ton 14.3 SEER2 Heat Pump Condenser - R32 Single Stage
Reliable Electric Heating & Cooling from One Outdoor Unit
This Goodman heat pump condenser provides electric heating and cooling from one outdoor unit when paired with compatible indoor equipment. It is a practical choice for homeowners who want year-round comfort, durable outdoor construction, and energy-conscious performance without relying only on gas heat.
Key Benefits
Heating and Cooling from One Unit – Provides electric heating and cooling when paired with compatible indoor equipment.
Sized for Small Homes – The 2 ton heat pump is generally suitable for homes around 1,000-1,300 sq. ft., depending on climate and home design.
Energy-Efficient Cooling – Up to 14.3 SEER2 cooling performance supports energy-conscious comfort when paired with compatible indoor equipment.
Climate-Based Heating Performance – At 0°F, this heat pump operates at 40% efficiency, making it a good fit for warmer climates where moderate heating support is sufficient.
Durable Outdoor Construction – Heavy-gauge galvanized steel cabinet with a baked-on powder-paint finish is built for outdoor durability.
Factory-Installed Filter Drier – Helps protect the refrigeration system from moisture and contaminants.
Heating & Cooling Capacity for Your Home
This heat pump provides 2 tons of heating and cooling capacity for homes around 1,000-1,300 square feet. Because heat pump performance can vary by climate and outdoor temperature, final sizing should be confirmed by a professional based on your region, insulation, windows, ceiling height, air leakage, and home layout.
Built for Reliable Heat Pump Performance
A heat pump provides heating and cooling from one outdoor unit when paired with compatible indoor equipment. In warmer months, it helps move heat out of the home, and in cooler months, it reverses operation to transfer available heat indoors. This outdoor condenser is built for year-round operation with durable cabinet construction, R32 refrigerant, and a factory-installed filter drier to help protect the refrigeration system from moisture and contaminants.
Efficient Year-Round Comfort
This Goodman heat pump delivers up to 14.3 SEER2 cooling efficiency when installed as part of a compatible system. Its energy-conscious design helps support dependable comfort through changing seasons when properly matched with compatible indoor equipment.
Efficiency Choices for Every Climate
Not all heat pumps are built the same. Depending on your climate, the best fit can depend on how efficiently the heat pump performs at lower outdoor temperatures. At 0°F, this heat pump operates at 40% efficiency, making it a good fit for warmer climates where moderate heating support is sufficient. The right match can help reduce energy use while keeping your home comfortable through changing seasons.
Goodman Heat Pump System: How Does it Work?
Goodman heat pumps provide both heating and cooling in one efficient system, making them a practical choice for year-round home comfort.
Instead of generating heat the way a traditional furnace does, a heat pump transfers heat from one place to another, helping warm the home in cooler weather and remove heat during warmer months.
With the ability to support comfort across multiple seasons, heat pumps offer a flexible solution for homeowners looking to simplify their heating and cooling setup.
Warranty
When installed according to applicable codes and registered online with Goodman, this heat pump includes:
10-Year Parts Limited Warranty
Warranty coverage requires proper installation and online registration. Installation by a qualified HVAC professional is recommended to maintain warranty eligibility.
What’s Included
Goodman heat pump condenser
Factory-installed filter drier
Recommended Accessories
Line Set – Select the appropriate line set length and configuration shown on the product page for your installation.
Condenser Installation Kit – Common installation materials for connecting the outdoor unit.
Thermostat – Choose from compatible non-programmable, programmable, or smart thermostat options based on your control preferences.
Mounting Equipment – Choose from available condenser mounting options, such as an equipment pad or wall mounting bracket, based on the installation location.
Requirements & Considerations
Compatible Indoor Equipment – This outdoor heat pump must be paired with compatible indoor equipment to provide heating and cooling.
Refrigerant Compatibility – Use only with compatible equipment designed for the same refrigerant type.
Professional Installation Recommended – Proper installation by a certified HVAC installer is important for safe operation and warranty coverage.
R32 Refrigerant Compatibility Notice
Disclaimer: This condenser contains R32 refrigerant, classified as an A2L refrigerant, and requires a refrigerant leakage detection system to be installed. To comply with safety standards, this unit must be paired with an R32 air handler or evaporator coil already equipped with a leakage detection system. Failure to comply with these requirements may result in safety hazards and could void the warranty. Please call us at 1-888-912-1827 if you have any questions.
This Goodman cased evaporator coil is designed to work with compatible R32 condensers and furnaces. With a 1.5 to 2 ton capacity, 17.5" cabinet width, upflow/downflow installation flexibility, and Goodman’s AlumaFin7™ coil design, it helps support proper equipment matching for approved split HVAC applications.
Key Benefits
Indoor Coil for Split HVAC Setups – Works with compatible condensers and furnaces to support system performance.
1.5 to 2 Ton Capacity – Designed for approved equipment matches where the coil capacity is equal to or greater than the condenser capacity.
17.5" Cabinet Width – Helps ensure the coil fits properly with compatible furnace cabinets and installation spaces.
Upflow/Downflow Installation – Supports installation flexibility for compatible vertical applications.
Goodman AlumaFin7™ Coil Design – Features an all-aluminum coil design with grooved aluminum tubing to help increase surface area for efficient heat transfer performance.
Factory-Installed TXV – Includes a thermostatic expansion valve to help regulate refrigerant flow.
R32 Compatible – Designed for use with compatible R32 refrigerant equipment.
Sized for Approved HVAC Applications
Proper coil matching is important for system performance, fit, and installation. This coil’s 1.5 to 2 ton capacity helps match it to compatible condenser applications, while the 17.5" cabinet width helps determine whether it will fit correctly with the furnace and available installation space.
Built with Goodman AlumaFin7™ Coil Design
Goodman’s AlumaFin7™ coil design features all-aluminum construction and grooved aluminum tubing to help increase surface area for heat transfer. This design supports efficient system operation while providing a durable indoor coil option for compatible R32 equipment.
How the Indoor Coil Supports Your System
The indoor coil is part of the refrigerant circuit and helps transfer heat as air moves across the coil. In a properly matched system, it works with the condenser, furnace blower, and refrigerant flow controls to support reliable home comfort.
Goodman AlumaFin7™: Efficient Comfort in a Compact Design
Goodman's AlumaFin7™ evaporator coil is designed to help your heating and cooling system operate efficiently while providing dependable comfort throughout your home. Its all-aluminum construction supports efficient heat transfer and long-lasting performance, while the advanced coil design helps promote proper airflow and moisture removal.
At just 21 inches deep, the compact design can also make installation easier in homes where space is limited. When paired with compatible Goodman equipment, the coil helps deliver the efficient, reliable heating and cooling you expect from Goodman.
Warranty
When installed according to applicable codes and registered online with Goodman, this evaporator coil includes:
10-Year Parts Limited Warranty
Warranty coverage requires proper installation and online registration. Installation by a qualified HVAC professional is recommended to maintain warranty eligibility.
What’s Included
Goodman cased evaporator coil
Factory-installed TXV
Recommended Equipment Options
Compatible Condenser – Used with the coil as part of a compatible split HVAC setup.
Compatible Gas Furnace – Provides the indoor airflow needed to move air across the coil in compatible applications.
Requirements & Considerations
Compatible Condenser Match – This coil must be paired with compatible outdoor equipment designed for the correct refrigerant type and approved equipment match.
Coil Tonnage – Coil capacity should be equal to or greater than the condenser capacity. Do not pair a coil with a condenser that exceeds the coil’s rated capacity.
Furnace Cabinet Width – Confirm the 17.5" coil cabinet width is compatible with the furnace and available installation space.
Replacement Planning – When replacing a coil, review whether the condenser, furnace, or overall equipment setup should also be updated.
Refrigerant Compatibility – Use with compatible R32 equipment and installation requirements.
Installation Orientation – Confirm the upflow/downflow coil orientation matches the installation application before purchase.
Professional Installation Recommended – Proper installation by a certified HVAC installer is important for safe operation and warranty coverage.
R32 Refrigerant Compatibility Notice
Disclaimer: This evaporator coil is designed for use with R32 refrigerant systems, classified as an A2L refrigerant. R32 systems must be installed with compatible equipment and any required refrigerant leak detection components according to the product specifications, installation manual, and applicable safety standards. Failure to follow these requirements may result in safety hazards and could void the warranty. Please call us at 1-888-912-1827 if you have any questions.
One Smart Thermostat for ACiQ Communicating & Traditional HVAC Systems
The ACiQ TL04-1 Smart Thermostat gives you the flexibility to control your HVAC system in two different ways. Use it as an advanced communicating thermostat with compatible ACiQ equipment or set it up as a traditional 24V thermostat for most conventional heating and cooling systems. Built-in Wi-Fi, an easy-to-use touchscreen, and smart-device control through the ACiQ Home app make it simple to manage your comfort at home or away.
Key Benefits
Communicating & 24V Control - Use with compatible ACiQ communicating equipment or as a traditional 24V thermostat.
Ideal for ACiQ Inverter Systems - HA/HB communication lets compatible ACiQ equipment communicate directly with the thermostat.
ACiQ Home App Control - Adjust temperatures and manage your comfort from a compatible smartphone or tablet.
Broad HVAC Compatibility - Works with most traditional 24V heating, cooling, and heat pump systems.
Easy Touchscreen Control - A modern touchscreen makes everyday temperature and system adjustments simple.
Smarter Comfort. Sleek Control.
The ACiQ TL04-1 Smart Thermostat is engineered to bring precise, intelligent control to your home’s HVAC system. Compatible with both standard 24V wiring and HA & HB communication protocols, it delivers flexibility for new builds or system upgrades.
One Thermostat, Two Ways to Control Your HVAC System
What makes the TL04-1 different is its ability to work as either a communicating or traditional thermostat. Pair it with compatible ACiQ equipment using HA/HB communication for direct communication between the thermostat and HVAC system, or configure it for traditional 24V control with most conventional HVAC equipment. This flexibility makes the TL04-1 a smart choice whether you're building a new ACiQ system or upgrading the thermostat in an existing home.
Get More from Compatible ACiQ Inverter Equipment
When connected to compatible ACiQ equipment through HA/HB wiring, the TL04-1 becomes a communicating thermostat that allows the thermostat and HVAC equipment to share information directly. This makes it an ideal control option for compatible ACiQ inverter systems and helps the equipment take advantage of its advanced operating capabilities.
Control Your Comfort with the ACiQ Home App
Connect the TL04-1 to the ACiQ Home app for convenient control from a compatible smartphone or tablet. Adjust temperatures and manage comfort settings remotely, giving you easy access to your HVAC system whether you're at home or away. The TL04-1 is also compatible with the NetHome Plus app for smart-device control.
Also Works with Traditional 24V HVAC Systems
You don't need a communicating ACiQ system to use the TL04-1. It can also be configured as a traditional thermostat for most 24V HVAC systems, including compatible one- and two-stage heating and cooling equipment and heat pumps with auxiliary and emergency heat.
What's Included
ACiQ TL04-1 Smart Thermostat
M-Base
Trim Plate
Wire Labels
Screws & Anchors
Installation Guide
Santa Fe Ultra70 Whole-Home Ventilating Dehumidifier Package, 70-pint | 115V - R454B (SKU 4044100)
OVERVIEW
The Santa Fe Ultra70 was the first compact whole house ventilating dehumidifier built for tight, low-clearance installs. It removes up to 70 pints of moisture per day and covers homes up to 1,800 square feet, which makes it a strong match for smaller houses, condos, and apartments.
Ducted into your HVAC system, the Ultra70 controls humidity everywhere at once instead of one room at a time. That means no musty basement smell, no clammy upstairs bedrooms, and no conditions that let mold and wood rot get started.
The cabinet measures 12" W x 12" H x 28" L and converts between horizontal and vertical airflow discharge, so it works in mechanical rooms, closets, attics, basements, and crawl spaces alike. Now running R454B refrigerant, it exceeds Department of Energy efficiency standards and is built at Santa Fe's headquarters in Madison, Wisconsin.
Key Features:
70 Pints Per Day – Whole-home moisture control for spaces up to 1,800 sq. ft.
Optional Fresh Air Ventilation – Duct outdoor air in to dilute indoor pollutants
MERV-13 Filtration – Standard filter captures fine airborne particles
Convertible Discharge – Rotate the panel for horizontal or vertical airflow
Compact 12" x 12" x 28" Cabinet – Fits where standard units can't
R454B Refrigerant – Exceeds DOE efficiency standards
115V / 5.4 Amps – Plugs into a standard grounded outlet
Made in Madison, Wisconsin – Heavy-duty steel construction
Customized Installation and Operation
The Ultra70 gives you three ways to install it. Tie it into your existing HVAC system with a dedicated 8" return and a supply connection with backdraft damper. Run it on its own separate ductwork. Or set it freestanding in a basement or crawl space when ducting isn't practical.
Both the return air inlet and supply air outlet use 8" duct collars. The back panel comes configured for horizontal flow through and rotates for vertical flow through with a T20 torx bit, which is what lets the same unit work in an attic, a closet, or under a floor.
Fresh air ventilation is optional and simple to add. A "T" into the inlet duct brings outdoor air into the system to dilute pollutants and maintain normal oxygen levels indoors, and the volume is adjustable with a range of dampers and controls.
HVAC Integration – Dedicated return plus ducted supply to the air handler
Dedicated Ducting – Runs on its own duct system independent of HVAC
Freestanding Operation – Works standalone in basements and crawl spaces
Optional Outdoor Air – Ventilation duct T's into the inlet, regulated by dampers and controls
Continuous Drain – Gravity drainage, no manual emptying
Warranty Information
Santa Fe warrants the Ultra70 Dehumidifier to be free from defects in materials and workmanship. The unit includes a 5-year limited warranty, with extended coverage on select components. Warranty coverage may vary based on installation, application, and registration requirements. Refer to the manufacturer’s documentation for complete warranty details.
Premium Materials & Construction
Dehumidifiers live in the roughest parts of a house. The Ultra70 is built from heavy-duty steel with components chosen to hold up to damp air, dust, and temperature swings over years of runtime.
Inside, a high-efficiency refrigeration coil, compressor, and fan work together to pull more moisture using about 15% less energy than comparably sized units. The R454B refrigerant charge lowers the environmental impact compared to earlier models while keeping performance where it needs to be.
The MERV-13 filter comes standard and pulls fine particles out of the airstream as the unit works. Vacuum it regularly and swap it every six months. The unit operates between 49°F and 95°F, plugs into a standard 115V grounded outlet at 5.4 amps, and ships with a 9 ft. cord.
Why Choose the Santa Fe Ultra70 Whole House Dehumidifier?
Whole-Home Moisture Control
Removes up to 70 pints per day across homes up to 1,800 square feet.
Ducted operation treats every room instead of chasing humidity one space at a time.
Fits Where Others Won't
Compact 12" x 12" x 28" cabinet handles low-clearance installs.
Convertible horizontal or vertical discharge solves tricky duct layouts.
Ventilation and Filtration Built In
Optional fresh outdoor air ducting dilutes indoor pollutants.
Standard MERV-13 filter captures fine airborne particles.
Efficiency You Can Measure
Exceeds Department of Energy standards with R454B refrigerant.
High-efficiency coil, compressor, and fan use roughly 15% less energy than similar units.
Built to Last
Heavy-duty steel construction, assembled in Madison, Wisconsin.
Continuous drainage and minimal maintenance for set-and-forget operation.
Wall Mount Bracket for Condensers 42"
This wall mount bracket is perfect for outdoor condensers. The length of the wall bracket arms are 42" long. The condensing unit is mounted onto the L-shaped brackets and fastened using bolts and anti-vibration washers (not included with brackets).
Features:
Steel: 10 GA
Powder-coated grey Finish
Load rating: 600 lbs per pair
Holes will accommodate anchors for installation
Warranty: 1 year
ACB line of wall brackets are approved by the Florida Building Commission and are High Velocity Hurricane Zone (HVHZ) approved. (See product certification documentation for complete details.)
Installation Kit for Condensers
Ensure a professional and secure installation for your condenser with this comprehensive installation kit. Designed to provide all the essential components needed for a smooth setup, this kit helps protect your system while ensuring proper electrical and refrigerant connections.
What’s Included:
3/4" x 6' Electrical Whip – SKU: 84138
60A Non-Fused Disconnect – SKU: 83335
Surge Protector – SKU: ICM517
CPS Charging Adapter – SKU: 87-AD87
Telescoping Wall Sleeve – SKU: NFP-75
Equip your condenser with everything needed for a safe, durable, and professional installation. Order your Condenser Installation Kit today!
Propane (LP) Conversion Kit for Goodman GR9S80 and GD9S80 Furnaces
The LPM-31 liquid propane (LP) conversion kit is used to convert the fuel type used by Goodman's GR9S80 and GD9S80 furnace series from natural gas to propane. Goodman furnaces are made to operate on natural gas by default. A propane conversion kit is required for any Goodman furnace installation where it needs to run on propane instead.
This conversion kit is made to work with Goodman's regular and low NOx GR9S80 and GD9S80 furnaces. Please note that it cannot be used with ultra-low NOx variations of these furnaces.
What's Included?
1x Conversion Label
1x Spring Kit for White-Rodgers 36G22/36J22 Valve
1x Burner Orifice
1x Installation Instructions
1x Gas Pressure Switch
1x 1/2" x 1/8" Bushing
1x Short Single-Stage Harness
1x Long Single-Stage Harness
1x LP Low Pressure Kit Label
1x Wiring Diagram
1x Regulator Spring Kit HW
Ecobee Smart WiFi Thermostat with Alexa
The Ecobee is more than a smart thermostat. Most thermostats only read the temperature in one place (usually the hallway) which can make other rooms uncomfortable. Ecobee5 comes with a room sensor to help manage hot or cold spots. When you place sensors in your favorite rooms, ecobee5 can read the temperature and detect occupancy. That's how it ensures comfort in the rooms that matter.
With Amazon Alexa Voice Service built inside, ecobee5 can perform the many 'skills' that come with Alexa. All you have to do is ask, and watch the blue light pipe on top of the thermostat blink in response. For total hands-free control, it can even hear you from across the room. Imagine you’re throwing a last-minute dinner party. Simply ask your ecobee5 to walk you through each step out loud – from finding the right recipes to the ideal music playlist. ecobee5 has embedded microphones with far-field voice recognition and a speaker engineered for clear voice and full sound. It’s the smart thermostat that looks at home on your wall – that you can hear and speak to from across the room.
Features
Not at your thermostat? No problem.
Adjust temperature and comfort settings easily from the ecobee mobile app on your Android and iOS devices, including Apple Watch.
Connects to your existing home network
Convenient Wi-Fi capabilities offer a secure and reliable connection.
Knows you have a life
Vacationing and forgot to let your ecobee know? Make a vacation event using the ecobee mobile app. If something’s wrong with your equipment, we can send you service alerts and reminders.
Control the volume
If it's getting a little loud for your taste, you can use the app to adjust the volume.
Built to last
ecobee thermostats are hardwired, which means your thermostat isn’t relying on a battery or your HVAC equipment to charge itself.
E Lite Equipment Pad 32" x 32" x 3"
The E Lite is a plastic pad designed as a mounting base for air conditioning condensers. The rugged design provides uniform and generous ribbing for optimum, self-leveling ground support without inserts. E Lite is injection molded from polypropylene, resulting in a pad that is lightweight, but not too light. A subtle texture prevents unit slide and presents a classic appearance, which is enhanced by rounded edges and a concrete gray color. Each pad is molded with its size in raised letters.
High recycled plastic content
Subtle texture resists unit slide
Unaffected by UV or weather
Uniform ribbing transfers load evenly
Drillable for securing unit
Lightweight, yet rugged
No Return Policy
All sales of this product are final and are non-refundable.
ACiQ WiFi Programmable Touchscreen Thermostat
The STN855W is a versatile WiFi thermostat offering 7-day, 5/1/1 programmable, or non-programmable options. It features a temperature range of 32°F-99°F (1°C-40°C) and precise control from 44°F-90°F (7°C-32°C) with an accuracy of ±1°C. Powered by 24V, it comes in a compact design with dimensions of 120 x 98 x 28 mm, making it ideal for efficient and customizable temperature management.
Raise Your Outdoor HVAC Equipment for Better Clearance & Protection
These 6-inch heat pump risers provide a sturdy, stable way to elevate compatible heat pumps, air conditioners, and other outdoor HVAC equipment. Raising equipment helps provide additional clearance from snow and standing water while improving drainage around the base, and the durable one-piece construction is built to withstand outdoor weather conditions.
Key Benefits
6-Inch Equipment Elevation - Helps keep outdoor equipment above snow, standing water, and other ground-level conditions.
Durable Outdoor Construction - Heavy-duty, weather-resistant construction provides stable support for compatible HVAC equipment.
Reduced Vibration & Noise - Butyl mastic helps secure equipment while reducing vibration and operating noise.
Complete 4-Pack - Includes four risers for supporting compatible outdoor HVAC equipment.
Ideal for Heat Pumps in Snowy Climates
Heat pumps operate throughout the winter and need adequate clearance around the outdoor unit for proper airflow and drainage. These 6-inch risers provide additional elevation to help keep compatible equipment above typical snow accumulation while allowing water to drain away from the equipment base.
Built for Outdoor HVAC Equipment
The heavy-duty one-piece design provides a strong yet lightweight mounting solution for heat pumps, air conditioners, air handlers, and other compatible equipment. Four risers can support up to a 2,000 lb. uniformly distributed load.
No-Tear 30 Feet of 3/8" x 3/4" - Black
Ensure smooth refrigerant flow and HVAC system efficiency with this no-tear 30-foot insulated line set. Designed for seamless connection between an outdoor condensing unit and an indoor air handler or evaporator coil, this line set offers durability, flexibility, and superior thermal insulation for high-performance HVAC applications.
Features:
3/8" liquid line (LL) and 3/4" suction line (SL) for optimal refrigerant transfer.
Extra thick 1/2" insulation to prevent tears during installation and from age.
30' long line set - Standard line set length for your typical HVAC installation.
Flexible and durable copper tubing allows for smooth routing and secure connections.
Durable, No-Tear Line Sets Built for Tough Installations
No-tear line sets are designed to eliminate one of the most common frustrations during HVAC installations—insulation that rips, tears, or breaks down over time. Built with enhanced durability and UV-resistant insulation, these line sets maintain their integrity during handling, installation, and long-term outdoor exposure. The result is a cleaner install, better protection, and fewer callbacks compared to standard line sets.
Key Benefits
No-Tear Insulation Construction – Resists ripping and damage during installation
Enhanced Durability – Holds up to jobsite handling and long-term use
UV-Resistant Jacket – Protects against sun exposure and outdoor degradation
Cleaner Installation Finish – Maintains a professional look without patching or tape
Long-Term Insulation Performance – Helps prevent breakdown over time
Contractor-Friendly Design – Easier to work with compared to standard line sets
Built to Withstand Real Jobsite Conditions
Traditional line sets often use insulation that can tear easily when pulled through walls, around corners, or across rough surfaces. No-tear line sets are engineered with a reinforced outer jacket that resists damage during installation, helping maintain insulation integrity from start to finish. This added durability not only improves installation efficiency but also reduces the need for repairs, tape, or replacement sections—saving time on the job and delivering a more professional final result.
UV Protection for Long-Term Outdoor Performance
Standard insulation can degrade when exposed to sunlight, leading to cracking, peeling, and reduced performance over time. No-tear line sets feature a UV-resistant outer layer designed to withstand prolonged outdoor exposure, helping preserve insulation quality and system efficiency. This makes them an ideal choice for installations where line sets are exposed along exterior walls or rooftops.
ACiQ Non-Programmable 2H/1C Thermostat
The ACiQ 2 Heat/1 Cool Non-Programmable Thermostat is a cost effective solution to temperature control! Designed with a bright backlight and large easy to read characters, this thermostat is easy to operate for all consumers.
Large display with bright blue/green/white backlight
Temperature control range (°F): 44°F-90°F (7°C-32°C)
24v or battery powered
Configurable for electric or gas setups
Separate heating and cooling swing adjustments, including 2nd stage adjustments
Separate B & O terminals
Toggleable filter change indicator
Heating and cooling set point limits
Room temperature calibration adjustment
Toggleable 5 minute compressor delay protection
Temperature measurement sccuracy: ±1°C (at 20°C)
No-Tear 30 Feet of 3/8" x 3/4" - White
Ensure smooth refrigerant flow and HVAC system efficiency with this no-tear 30-foot insulated line set. Designed for seamless connection between an outdoor condensing unit and an indoor air handler or evaporator coil, this line set offers durability, flexibility, and superior thermal insulation for high-performance HVAC applications.
Features:
3/8" liquid line (LL) and 3/4" suction line (SL) for optimal refrigerant transfer.
Extra thick 1/2" insulation to prevent tears during installation and from age.
30' long line set - Standard line set length for your typical HVAC installation.
Flexible and durable copper tubing allows for smooth routing and secure connections.
Durable, No-Tear Line Sets Built for Tough Installations
No-tear line sets are designed to eliminate one of the most common frustrations during HVAC installations-insulation that rips, tears, or breaks down over time. Built with enhanced durability and UV-resistant insulation, these line sets maintain their integrity during handling, installation, and long-term outdoor exposure. The result is a cleaner install, better protection, and fewer callbacks compared to standard line sets.
Key Benefits
No-Tear Insulation Construction - Resists ripping and damage during installation
Enhanced Durability - Holds up to jobsite handling and long-term use
UV-Resistant Jacket - Protects against sun exposure and outdoor degradation
Cleaner Installation Finish - Maintains a professional look without patching or tape
Long-Term Insulation Performance - Helps prevent breakdown over time
Contractor-Friendly Design - Easier to work with compared to standard line sets
Built to Withstand Real Jobsite Conditions
Traditional line sets often use insulation that can tear easily when pulled through walls, around corners, or across rough surfaces. No-tear line sets are engineered with a reinforced outer jacket that resists damage during installation, helping maintain insulation integrity from start to finish. This added durability not only improves installation efficiency but also reduces the need for repairs, tape, or replacement sections-saving time on the job and delivering a more professional final result.
UV Protection for Long-Term Outdoor Performance
Standard insulation can degrade when exposed to sunlight, leading to cracking, peeling, and reduced performance over time. No-tear line sets feature a UV-resistant outer layer designed to withstand prolonged outdoor exposure, helping preserve insulation quality and system efficiency. This makes them an ideal choice for installations where line sets are exposed along exterior walls or rooftops.
30 Feet of 3/8" x 3/4"
Line sets are the copper lines which connect an outdoor condensing unit/heat pump to an inside air handler or evaporator coil. Line sets are available in different lengths and diameters to fit most applications.
No-Tear 50 Feet of 3/8" x 3/4" - Black
Ensure smooth refrigerant flow and HVAC system efficiency with this no-tear 50-foot insulated line set. Designed for seamless connection between an outdoor condensing unit and an indoor air handler or evaporator coil, this line set offers durability, flexibility, and superior thermal insulation for high-performance HVAC applications.
Features:
3/8" liquid line (LL) and 3/4" suction line (SL) for optimal refrigerant transfer.
Extra thick 1/2" insulation to prevent tears during installation and from age.
50' long line set - Ideal for HVAC setups requiring a longer line set run.
Flexible and durable copper tubing allows for smooth routing and secure connections.
Durable, No-Tear Line Sets Built for Tough Installations
No-tear line sets are designed to eliminate one of the most common frustrations during HVAC installations—insulation that rips, tears, or breaks down over time. Built with enhanced durability and UV-resistant insulation, these line sets maintain their integrity during handling, installation, and long-term outdoor exposure. The result is a cleaner install, better protection, and fewer callbacks compared to standard line sets.
Key Benefits
No-Tear Insulation Construction – Resists ripping and damage during installation
Enhanced Durability – Holds up to jobsite handling and long-term use
UV-Resistant Jacket – Protects against sun exposure and outdoor degradation
Cleaner Installation Finish – Maintains a professional look without patching or tape
Long-Term Insulation Performance – Helps prevent breakdown over time
Contractor-Friendly Design – Easier to work with compared to standard line sets
Built to Withstand Real Jobsite Conditions
Traditional line sets often use insulation that can tear easily when pulled through walls, around corners, or across rough surfaces. No-tear line sets are engineered with a reinforced outer jacket that resists damage during installation, helping maintain insulation integrity from start to finish. This added durability not only improves installation efficiency but also reduces the need for repairs, tape, or replacement sections—saving time on the job and delivering a more professional final result.
UV Protection for Long-Term Outdoor Performance
Standard insulation can degrade when exposed to sunlight, leading to cracking, peeling, and reduced performance over time. No-tear line sets feature a UV-resistant outer layer designed to withstand prolonged outdoor exposure, helping preserve insulation quality and system efficiency. This makes them an ideal choice for installations where line sets are exposed along exterior walls or rooftops.
No-Tear 50 Feet of 3/8" x 3/4" - White
Ensure smooth refrigerant flow and HVAC system efficiency with this no-tear 50-foot insulated line set. Designed for seamless connection between an outdoor condensing unit and an indoor air handler or evaporator coil, this line set offers durability, flexibility, and superior thermal insulation for high-performance HVAC applications.
Features:
3/8" liquid line (LL) and 3/4" suction line (SL) for optimal refrigerant transfer.
Extra thick 1/2" insulation to prevent tears during installation and from age.
50' long line set - Ideal for HVAC setups requiring a longer line set run.
Flexible and durable copper tubing allows for smooth routing and secure connections.
Durable, No-Tear Line Sets Built for Tough Installations
No-tear line sets are designed to eliminate one of the most common frustrations during HVAC installations-insulation that rips, tears, or breaks down over time. Built with enhanced durability and UV-resistant insulation, these line sets maintain their integrity during handling, installation, and long-term outdoor exposure. The result is a cleaner install, better protection, and fewer callbacks compared to standard line sets.
Key Benefits
No-Tear Insulation Construction - Resists ripping and damage during installation
Enhanced Durability - Holds up to jobsite handling and long-term use
UV-Resistant Jacket - Protects against sun exposure and outdoor degradation
Cleaner Installation Finish - Maintains a professional look without patching or tape
Long-Term Insulation Performance - Helps prevent breakdown over time
Contractor-Friendly Design - Easier to work with compared to standard line sets
Built to Withstand Real Jobsite Conditions
Traditional line sets often use insulation that can tear easily when pulled through walls, around corners, or across rough surfaces. No-tear line sets are engineered with a reinforced outer jacket that resists damage during installation, helping maintain insulation integrity from start to finish. This added durability not only improves installation efficiency but also reduces the need for repairs, tape, or replacement sections-saving time on the job and delivering a more professional final result.
UV Protection for Long-Term Outdoor Performance
Standard insulation can degrade when exposed to sunlight, leading to cracking, peeling, and reduced performance over time. No-tear line sets feature a UV-resistant outer layer designed to withstand prolonged outdoor exposure, helping preserve insulation quality and system efficiency. This makes them an ideal choice for installations where line sets are exposed along exterior walls or rooftops.
50 Feet of 3/8" x 3/4"
Ensure efficient refrigerant flow and optimal HVAC performance with this 50-foot insulated line set. Designed for seamless connection between an outdoor condensing unit or heat pump and an indoor air handler or evaporator coil, this line set offers durability, flexibility, and superior thermal protection for long-lasting operation.
Key Features:
✔ Premium Copper Tubing: 3/8" liquid line (LL) and 3/4" suction line (SL) for efficient refrigerant transfer. ✔ Pre-Insulated for Efficiency:3/8" thick insulation minimizes energy loss and condensation buildup. ✔ Versatile Application: Compatible with heat pumps and conventional split systems. ✔ Easy Installation:Flexible and durable copper tubing allows for smooth routing and connection. ✔ Extended 50-Foot Length: Ideal for larger residential and light commercial HVAC installations.
Upgrade your HVAC system with this high-quality insulated line set, engineered for reliability, efficiency, and ease of installation.
This product and many products on our site may contain a chemical know to the state of California to cause cancer or birth defects or other reproductive harm. For more information about Proposition 65 please Click Here.
This product and many products on our site may contain a chemical know to the state of California to cause cancer or birth defects or other reproductive harm. For more information about Proposition 65 please Click Here.
60,000 BTU 80% AFUE Single Stage Goodman Gas Furnace | 17.5" Width | Upflow / Horizontal
Feature
Spec
SKU
GR9S800603BN
Weight (in lbs)
100
AHRI Certificate Number
215358049
Airflow Direction
Upflow/Horizontal
Exhaust Flue Requirement
Metal
Brand/Manufacturer
Goodman
UPC
663051684843
Furnace Efficiency / AFUE
80%
Heating BTU
60,000
Blower Motor
9 Speed - ECM
Maximum CFM
1200
Configuration
Upflow/Horizontal
Electrical
115 V. 1 Phase 60 Hz
Max Breaker Size
15 Amps
Min. Breaker Size
7.7 Amps
Burner Stages
Single
Fuel Type
Propane, Natural Gas
Height
33 3/8"
Width
17 1/2"
Depth
28"
Warranty
Lifetime Heat Exchanger and 10 Years Parts with Online Registration
You will need Adobe® Acrobat® Reader to view PDF documents.
Safety Information
This gas appliance requires a trained technician to install. Improperly connecting gas lines or improperly connecting a gas flue or venting may result in death. By purchasing this item, you are agreeing that you are using a trained technician to install this gas appliance. We will not be responsible for any injury or property damage arising from improper service or service procedures. Whoever installs or services this unit assumes responsibility for any personal injury or property damage which may result. Many jurisdictions require a license to install this equipment.
This product and many products on our site may contain a chemical known to the state of California to cause cancer or birth defects or other reproductive harm. For more information about Proposition 65 please Click Here.
50 Feet of 3/8" LL x 3/4" SL x 1/2" No-Tear Insulated Line Set - White
This product and many products on our site may contain a chemical know to the state of California to cause cancer or birth defects or other reproductive harm. For more information about Proposition 65 please Click Here.
50 Feet of 3/8" LL x 3/4" SL x 1/2" No-Tear Insulated Line Set - Black
This product and many products on our site may contain a chemical know to the state of California to cause cancer or birth defects or other reproductive harm. For more information about Proposition 65 please Click Here.
50 Feet of 3/8" LL x 3/4" SL x 3/8" Insulated Line Set
This product and many products on our site may contain a chemical know to the state of California to cause cancer or birth defects or other reproductive harm. For more information about Proposition 65 please Click Here.
30 Feet of 3/8" LL x 3/4" SL x 1/2" No-Tear Insulated Line Set - White
This product and many products on our site may contain a chemical know to the state of California to cause cancer or birth defects or other reproductive harm. For more information about Proposition 65 please Click Here.
30 Feet of 3/8" LL x 3/4" SL x 1/2" No-Tear Insulated Line Set - Black
This product and many products on our site may contain a chemical know to the state of California to cause cancer or birth defects or other reproductive harm. For more information about Proposition 65 please Click Here.
30 Feet of 3/8" LL x 3/4" SL x 3/8" Insulated Line Set
Feature
Spec
SKU
LS38343830
Weight (in lbs)
35
Brand/Manufacturer
Online Supply
UPC
na
Liquid Line
3/8"
Suction Line
3/4"
Suction Line Insulation Thickness
3/4"
Length
30 feet
Color
Black
Propane (LP) Conversion Kit for Goodman GR9S80 and GD9S80 Furnaces
You will need Adobe® Acrobat® Reader to view PDF documents.
Safety Information
This gas appliance requires a trained technician to install. Improperly connecting gas lines or improperly connecting a gas flue or venting may result in death. By purchasing this item, you are agreeing that you are using a trained technician to install this gas appliance. We will not be responsible for any injury or property damage arising from improper service or service procedures. Whoever installs or services this unit assumes responsibility for any personal injury or property damage which may result. Many jurisdictions require a license to install this equipment.
This product and many products on our site may contain a chemical known to the state of California to cause cancer or birth defects or other reproductive harm. For more information about Proposition 65 please Click Here.
This product and many products on our site may contain a chemical know to the state of California to cause cancer or birth defects or other reproductive harm. For more information about Proposition 65 please Click Here.
This product and many products on our site may contain a chemical know to the state of California to cause cancer or birth defects or other reproductive harm. For more information about Proposition 65 please Click Here.
This product and many products on our site may contain a chemical know to the state of California to cause cancer or birth defects or other reproductive harm. For more information about Proposition 65 please Click Here.
This product and many products on our site may contain a chemical know to the state of California to cause cancer or birth defects or other reproductive harm. For more information about Proposition 65 please Click Here.
Santa Fe Ultra70 Whole-Home Ventilating Dehumidifier Package, 70-pint | 115V - R454B (SKU 4044100)
Feature
Spec
SKU
UL3684
Weight (in lbs)
55
Size
70 Pints
Brand/Manufacturer
Santa Fe
UPC
810017961634
Included Items
Leveling feet (4), MERV 13 filter (9” x 11” x 1”), 8” round duct collars (2)
This product and many products on our site may contain a chemical know to the state of California to cause cancer or birth defects or other reproductive harm. For more information about Proposition 65 please Click Here.
This product and many products on our site may contain a chemical know to the state of California to cause cancer or birth defects or other reproductive harm. For more information about Proposition 65 please Click Here.
This product and many products on our site may contain a chemical know to the state of California to cause cancer or birth defects or other reproductive harm. For more information about Proposition 65 please Click Here.
This product and many products on our site may contain a chemical know to the state of California to cause cancer or birth defects or other reproductive harm. For more information about Proposition 65 please Click Here.
This product and many products on our site may contain a chemical know to the state of California to cause cancer or birth defects or other reproductive harm. For more information about Proposition 65 please Click Here.
Buyers consistently report fast shipping—often within a few days, with some deliveries in as little as two to five days—and straightforward installation, including DIY setups completed in about three hours or with minimal professional checkouts, while units such as 80% AFUE 80,000–120,000 BTU models effectively heat spaces up to 2,100 square feet and 1,320 square feet homes. Feedback highlights quiet operation, compact size compared to older 20- to 30-year furnaces, and strong value versus local quotes (for example $2,700 vs $5,200), though some mention shipping damage, missing paperwork, warranty requirements for certified technician troubleshooting, and isolated noise concerns with specific compressor models.
AI Generated from the text of customer reviews
Top reviews
It works great
Quality
100%
Service
100%
Price
100%
The unit works great and I only need to fill up propane once a year
Review byJan
Posted on
The company was reasonably priced and delivery was right on time. The furnace is definitely worth the money with no hassle on installing it.
Quality
100%
Service
100%
Price
100%
I would definitely buy from them if I needed to.
Review byRose
Posted on
Great furnace
Quality
100%
Service
100%
Price
100%
We are pleased with our choice for the furnace. It works well and is efficient. I installed it and had a professional come in and go over everything before firing up. He made a few suggestions and fired it up. It works great
Review byDF
Posted on
Everything about this company and there products are too notch
Quality
100%
Service
100%
Price
100%
Service is great, calling and getting someone to assist was easy and a delight. Product shipped on time, arrived in perfect condition.
Price was better than anywhere else
I would not use any other company for any of my HVAC needs
Highly recommend
Review byAHB
Posted on
3 ton units
Quality
100%
Service
100%
Price
100%
The units have performed great and the price couldn't be beat .
Review byB
Posted on
Goodman 80% 120,000 BTU Two Stage Gas Furnace - 24.5" Width - Upflow / Horizontal
Quality
100%
Service
100%
Price
100%
Arrived quickly and well packaged. Good price for a 80% efficiency furnace today. This is for house build in 1938 and renovation in 2018 with a deck floor addition. The livable square footage of this house is 2,100 square feet in Northern New Jersey. Keeps the place comfortable and reasonably quiet. I highly recommend Goodman and HVACDIRECT.com.
Review byJason
Posted on
Hot air furnace
Quality
100%
Service
100%
Price
100%
Bought a decent amount of systems from them and they are so far seem to be working as they should I got great deal also on Black Friday and they match any other suppliers and beat them by a little I highly recommend this company!
Review byRob
Posted on
Goodman 80btu
Quality
100%
Service
100%
Price
100%
Saleman was great , service was great, delivery was great.......and the price was Right. The furnace was installed about a week now it's very quiet and efficient. ????
AI Generated from the text of customer reviews