Goodman 2.5 Ton 13.4 SEER2 80% AFUE 90,000 BTU Mobile Home Air Conditioner and Gas Furnace System with Coil - R32

Dependable Cooling for Small to Medium Mobile Homes

Keep your home comfortable through warm weather with a budget-friendly Goodman central air conditioner condenser built for reliable split-system cooling. This outdoor condenser is a practical choice for homeowners replacing an existing AC component or completing a compatible cooling setup with a matching indoor coil or air handler. It balances dependable performance, durable outdoor construction, and straightforward installation support for small to medium mobile homes.

Key Benefits

• Sized for Small To Medium Mobile Homes – 2.5 ton cooling capacity is generally suitable for Mobile Homes approximately 900–1,300 sq. ft., depending on climate, insulation, windows, ceiling height, air leakage, home layout, and a professional sizing review.
• Budget-Friendly Efficiency – 13.4 SEER2 performance provides dependable cooling at an economical efficiency level for approved installation regions.
• Cooling-Only Performance – Designed for central air conditioning applications when paired with a compatible indoor evaporator coil or air handler.
• Low Outdoor Sound – Designed with sound-dampening features and rated at approximately 74 dBA.
• Factory-Charged for Installation – Comes factory charged for up to 15' of line set to support a cleaner installation process.
• Factory-Installed Filter Drier – Protects the refrigeration system by reducing moisture and contaminants.
• Durable Outdoor Construction – Heavy-gauge galvanized steel cabinet with a baked-on powder-paint finish is built for long-term outdoor durability.

Cooling Capacity for Small to Medium Mobile Homes

With 2.5 tons of cooling capacity, this condenser is commonly used for Mobile Homes approximately 900–1,300 sq. ft. in various climates. It is a cooling-only outdoor unit and must be paired with a compatible indoor evaporator coil or air handler to operate.

Actual sizing depends on your local climate, insulation, windows, ceiling height, air leakage, home layout, and a professional sizing review.

Budget-Friendly 13.4 SEER2 Efficiency

A 13.4 SEER2 efficiency rating provides dependable cooling while keeping equipment costs affordable for eligible installation locations.

Installation Restrictions

Due to efficiency requirements, this unit cannot be installed in the following states: Alabama, Arizona, Arkansas, California, Delaware, Florida, Georgia, Kentucky, Louisiana, Maryland, Mississippi, Nevada, New Mexico, North Carolina, Oklahoma, South Carolina, Tennessee, Texas, and Virginia.

Built for Reliable Outdoor Performance

An enhanced copper tube and aluminum fin coil, factory-installed filter drier, and heavy-gauge galvanized steel cabinet support dependable long-term operation. Easy-access service ports and top and side access panels also make installation and maintenance more straightforward for qualified HVAC professionals.

Warranty

This condenser includes a 10-Year Limited Parts Warranty with online registration. Installation must comply with state and local codes, and warranty coverage may be void if the unit is not installed by a qualified professional.

What’s Included

• Goodman Central Air Conditioner Condenser – Outdoor cooling unit for a compatible split-system installation.
• Factory-Installed Filter Drier – Protects the refrigeration system by reducing moisture and contaminants.

Recommended Accessories

• Line Set – Connects the outdoor condenser to compatible indoor equipment for refrigerant flow; select the 30' or 50' option that matches the installation.
• Condenser Installation Kit – Provides key installation materials for a cleaner condenser setup.

Requirements & Considerations

• Compatible Indoor Equipment Required – This cooling-only condenser must be paired with a compatible indoor evaporator coil or air handler.
• Electrical Requirements – Requires a 208 / 230 V. 1 Phase 60 Hz electrical supply.
• Line Set Connections – Uses a 3/8" liquid line and a 3/4" suction line.
• Professional Installation Recommended – Proper installation, system matching, and refrigerant handling are important for safe operation and warranty coverage.

R32 Refrigerant Compatibility Notice

Disclaimer: This condenser contains R32 refrigerant, classified as an A2L refrigerant, and requires a refrigerant leakage detection system to be installed. To comply with safety standards, this unit must be paired with an R32 air handler or evaporator coil already equipped with a leakage detection system. Failure to comply with these requirements may result in safety hazards and could void the warranty. Please call us at 1-888-912-1827 if you have any questions.

Line sets are the copper lines which connect an outdoor condensing unit/heat pump to an inside air handler or evaporator coil. Line sets are available in different lengths and diameters to fit most applications.

OVERVIEW

The Style Crest-Revolv MG1E-B090F1ABM1 is a good solution for many manufactured or mobile home gas furnace applications. With its easy installation procedures, low maintenance, and included LP conversion kit, the MG1E-B090F1ABM1 will save you money both up front and over time.

QUICK FACTS

• 90,000 BTU, 80% natural gas furnace
• Can generally heat a medium mobile home in ideal applications
• Compatible with R410A and R454B refrigerant
• Natural gas out of the box, but comes with an LP kit for field installation if needed
• Low maintenance requirements
• AC coil cabinet included with purchase (condenser and coil sold separately)
• Efficient ECM blower motor

90,000 BTU, 80% AFUE

With a system input of 90,000 BTU, The Style Crest-Revolv MG1E-B090F1ABM1 furnace can generally heat medium mobile homes in ideal applications. With a basic efficiency rating of 80% AFUE, this input equates to an output of 72,000 BTU, and 80% of the fuel going into the unit is contributed to heating your home and the remaining 20% of the fuel is lost out of the flue venting and is used up in normal furnace operations. If you are coming from our site's sizing calculator, please note that it is a good idea to upsize any calculation to compensate for limited insulation and other factors that cause a mobile home to differ from traditional home sizing. If you have any questions, please contact us. Please note that this furnace is intended to only be used in mobile and manufactured homes and requires a straight flue pipe without any elbows.

Warranty

Revolv gas furnaces come with 2 year parts, and 10 year heat exchanger warranty when registered online through the manufacturer and with an installation that follows your state and local codes.

Installation and Maintenance

The Style Crest-Revolv MG1E-B090F1ABM1 furnace is designed to be easily installed for a faster process, lowering labor costs. While this furnace is natural gas out of the box, a propane conversion kit is included in this package to be field-installed if needed with no additional material cost, saving you money. With its sealed motor bearings, reliable burner controls, modern hot surface ignitor, and sealed combustion, this furnace has low maintenance requirements, providing the peace of mind that your unit will reliably heat your home even in the coldest winter months.

Mobile Home Buying & Sizing Guide

• Mobile home approved product types
• Product differences
• Figuring out the right size unit for your needs
• Determining factors
• Repair vs. replace

Mobile Home Buying & Sizing Guide