Pre-Charged Line Set Mini Split Benefits
If your air conditioning needs at home are modest, then you don't need to go for the largest air conditioner condensers on the market. Luckily, there are several effective solutions for smaller homes and single room installations.
One of these options is pre-charged mini split air conditioners that help you save time and money. Since they don't require ducting or refrigerant charging on-site, choosing them makes installation and operation much easier and more convenient. In many cases, you can connect your indoor and outdoor AC equipment and start cooling off a room without hiring a technician. Installing a pre-charged line set mini split system can be done by a DIYer to save money.
Installing ducting is extremely expensive, so a great way to save and get efficient heating and cooling is to find the best pre-charged mini splits for sale at HVACDirect.com. Let's explore the benefits of these DIY ductless mini split systems and why they could be perfect for your installation.
Mini Split Air Conditioning Condensers Don't Require Any Ducting
Ducting is used in large home installations where heating and air-conditioned cool air needs to be distributed to almost every room in the house. These systems are popular in large homes because many older homes already have ducting solutions for central heat.
The problem with these systems is that they are inherently inefficient due to the length and number of available venting outlets. This means that installations need to be heavily insulated ducting and temperature zone controls to reduce wasted energy. At the end of the day, a project like this can cost a lot of money.
Mini split units, on the other hand, don't require ducting because the blower unit is mounted on the inside of a wall while the air conditioning condenser units are placed outdoors, on the other side of the wall. Without the need for ducting, you could enjoy considerable cost savings when installing a pre-charged line set mini split system.
When ordering your system, it's important to ask if a mini split heat and cool comes pre-charged. While more and more systems do, others still use conventional lines that must be charged on-site by a technician.
Condenser Air Conditioners Can Be Used for More Than One Indoor Blower
Depending on the power of the AC condenser and outdoor unit, it's possible to have multiple air handlers installed. In fact, when you look at all mini split options, not just those with pre-charged line sets, you can find up to eight zone mini split systems and even nine-zone systems, too, in some select brands.
At HVACDirect.com, we offer a range of different mini split solutions to meet your needs and your budget. Our inventory includes many multi-zone mini splits, plus the best pre-charged ductless split AC systems at wholesale prices from leading brands like MRCOOL and Perfect Aire.
Using these air conditioners provide similar benefits to a ducted system without the high installation costs or any losses in efficiency. When a blower is turned off, it's simply not functioning, meaning there is no energy or thermal waste. A multi-blower system would be perfect for a family home or even a small to mid-sized commercial property.
Condenser Units Require Minimal Work to Install
Labor costs can make it expensive to install an air conditioning condenser. The key is to find a system that requires the minimum amount of time and effort to install. Pre-charged mini split systems are by far the easiest units to install, which can greatly reduce the expense of getting your home setup with AC. Most pre-charged line set mini split systems are even simple enough for DIY installations and are often referred to as DIY mini splits.
Outdoor AC condenser units are connected to the indoor units with a pre-charged line set and an electrical wire that handles communication between the blower (air handler) and the air conditioning condenser. This means that only small holes need to be drilled into exterior walls to have a system installed. Even on larger systems where there are multiple blowers, the pre-charged lines and electrical control wire can be run through ceilings or floors for the most efficient and cost-effective installation.
Mini Split Systems with Outdoor AC Condenser Units are Installed Faster
The actual time it takes to install a mini split system can be surprising. You may have assumed that it would take a day or even more to install a small system. However, the reality is that it can be completed in just a couple of hours in most cases. The job requires less work, no ducting and minimal cutting to install pre-charged lines and electrical cables, eliminating many hassles of HVAC work. If you are installing a larger system with multiple blowers, then the job may take slightly longer. Still, it's not going to be anything nearly as inconvenient as a full split system or all-in-one integrated central system.
Reduced costs, high efficiency and simple and quick installation are all benefits that make mini split systems so popular today. If you're building an addition, retrofitting an older home or workshop, then mini split systems with pre-charged line sets are the way to go. View the complete range of available DIY mini splits systems at HVACDirect.com today.
Mini Split Pre-Charged Lines Frequently Asked Questions
Do mini splits come pre-charged?
Some mini split systems have pre-charged refrigerant lines, but not all. The ones that do are often marketed as "DIY Mini Split Systems". MRCOOL pre-charged mini split lines are the most common pre-charged system, though you can also get them Perfect Aire.
What is a pre-charged line set?
Pre-charged lines have already been charged with a refrigerant such as R410A or R134A and then sealed at the factory. A standard refrigerant charge can support up to 26 feet of pipe between the indoor and outdoor unit, but if your installation requires more piping, a certified installer may need to add more refrigerant.
Can I install my mini split system myself?
Some mini split systems have pre-charged refrigerant lines that do not require vacuuming. Typical installations require only basic tools, making these units are ideal for ambitious DIYers. Choosing a DIY mini split system is a great way to save money without sacrificing performance or quality.
